How many seconds does the Elantra take to accelerate from 0 to 100?

1 Answers
SanSpencer
07/29/25 5:56pm
The actual measured 0-100km/h acceleration time for the Hyundai Elantra 1.8L model is 10.41 seconds. The 0-100km/h acceleration time refers to the time taken to accelerate from standstill to 100km/h, which is the most intuitive reflection of a car's power. Below is some relevant information about it: 1. Global Model: The Elantra is a global model from Hyundai that was first launched overseas. The 'Elantra' has an undeniable 'international flair'—it has swept across four continents worldwide, achieving remarkable success. 2. Interior: The color scheme remains the standard gray upper and beige lower, with a yellowish tone, which is characteristic of Korean cars, emphasizing a homely atmosphere. The silver-gray bright strips adorned from top to bottom in the center are stylish yet not abrupt.
Was this review help?
17
0
Share
More Forum Discussions

What is the Principle of the Clutch?

The driving and driven parts of the clutch utilize friction between their contact surfaces. Below is a relevant introduction about the clutch: 1. Clutch: The clutch is located inside the flywheel housing between the engine and the transmission. The clutch assembly is secured to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission. During driving, the driver can press or release the clutch pedal as needed to temporarily disconnect or gradually engage the engine and the transmission, thereby cutting off or transmitting the power from the engine to the transmission. 2. The Principle of Releasing the Clutch: The principle of releasing the clutch is summarized as "slow first, fast second, and synchronized third." When initially pressing the pedal, it should be done quickly and all the way to the bottom. When lifting the pedal, the free travel should be quick, slowing down as it approaches the contact point. At the semi-engagement point, there should be a slight pause before fully releasing. The key to this process is accurately finding the semi-engagement point. To control the vehicle speed effectively, the semi-engagement point serves as the dividing line: lifting quickly above it and slowing down below it, adjusting downward to choose a speed that suits the driver.
17
2
Share

How to open the fuel tank cap of Roewe RX5?

The switch for the fuel tank cap is located below the steering wheel, near the A-pillar. Press it to open the fuel tank cap. Here are the specific details about the Roewe RX5: 1. Body dimensions: The Roewe RX5 is a compact SUV with a length of 4556 mm, width of 1855 mm, height of 1719 mm, and a wheelbase of 2700 mm. 2. Powertrain configuration: The Roewe RX5 is equipped with a 1.5-liter turbocharged engine, coded as 15E4E. This engine delivers a maximum power of 169 horsepower and a peak torque of 250 Nm. It reaches maximum power at 5500 rpm and maximum torque between 1700 and 4300 rpm. The engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with either a 7-speed dual-clutch transmission or a 6-speed manual transmission.
3
0
Share

How many kilometers does the Volkswagen CC need for maintenance?

Volkswagen CC requires maintenance every 5,000 kilometers, and it is recommended not to exceed 7,500 kilometers. Car maintenance, also known as car servicing, refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car. The Volkswagen CC is a mid-size sedan launched by FAW-Volkswagen, with body dimensions of 4864mm in length, 1870mm in width, and 1447mm in height, and a wheelbase of 2841mm. In terms of power, the Volkswagen CC is equipped with a 2.0T turbocharged engine, delivering a maximum power of 200 horsepower and a peak torque of 280 Nm, paired with a 6-speed dual-clutch transmission. In terms of appearance, the rear design of the Volkswagen CC gives a wide visual experience, with the upturned ducktail enhancing the sporty feel. The taillights feature a brand-new design, with sequential turn signals offering high recognition, and the smoked design also adds to the visual appeal.
16
0
Share

Where is the appropriate position to place car decorations?

Car decorations can be hung on the central rearview mirror inside the car or placed on the dashboard. Below is the relevant introduction about the position of car decorations: 1. Precautions: Hang the decorations on the rearview mirror without blocking the view, and secure them properly to prevent the decorations from falling and injuring the driver during driving. Also, choose non-polluting decorations. Do not use steering wheel covers, as they can easily cause hand slipping, leading to danger and accidents. 2. Hazards: Blunt objects pose safety risks during driving, potentially causing traffic accidents and endangering life safety. Car decorations can be hung on the central rearview mirror inside the car or placed on the dashboard. Below is the relevant introduction about the position of car decorations: 1. Precautions: Hang the decorations on the rearview mirror without blocking the view, and secure them properly to prevent the decorations from falling and injuring the driver during driving. Also, choose non-polluting decorations. Do not use steering wheel covers, as they can easily cause hand slipping, leading to danger and accidents. 2. Hazards: Blunt objects pose safety risks during driving, potentially causing traffic accidents and endangering life safety.
6
4
Share

How to Activate Automatic Wiper Function?

Turn on the wiper switch to activate automatic wiping. Relevant information is as follows: 1. Introduction: The windshield wiper switch is the control device for wiper operation, mostly installed on the steering column at the lower right of the steering wheel and operated with the right hand. Pull the switch lever downward or push upward to select different wiping modes. 2. Function: The wiper is a blade structure installed in front of the windshield, composed of motor, reducer, four-bar linkage, wiper arm spindle, and wiper blade assembly. Its primary function is to remove rain, snow, and dust that obstruct the driver's view on the windshield.
15
4
Share

Should I Get a Motorcycle License or a Car License First?

It is recommended to obtain a car driver's license first, and then you can apply for a motorcycle license after one year. Below are the requirements for obtaining a driver's license: 1. Height: Must meet the requirements for the vehicle type. 2. Vision: Must not be colorblind. 3. Hearing: Must have normal hearing. 4. Limbs: Must have healthy limbs, torso, and both thumbs, with at least three fingers intact on each hand. 5. Motor function: Must have normal upper and lower limb motor function. Below is additional information for applying for a driver's license: 1. Photos: Seven 1-inch white-background color photos. 2. Application fee: Payment can be made in cash, by card, or via bank transfer. 3. ID copy: A photocopy of your ID card is required, with both sides copied onto a single sheet of paper. 4. Household registration copy: For non-local residents, a residence permit is also required.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.