How many seconds does the BYD Han take to accelerate from 0 to 100 km/h?

1 Answers
MacSamantha
07/30/25 2:41am
BYD Han accelerates from 0 to 100 km/h in 7.9 seconds. The 0-100 km/h acceleration time refers to the time it takes for a car to accelerate from a standstill to 100 kilometers per hour, which is an intuitive reflection of the car's power. Generally, 1.6L compact cars achieve 0-100 km/h acceleration times between 11 to 13 seconds, while 2.0T mid-size sedans range between 7 to 8 seconds. Supercars mostly have acceleration times of less than 3.8 seconds. The BYD Han is a mid-to-large luxury car under the BYD brand, with body dimensions of 4980mm in length, 1910mm in width, and 1495mm in height, and a wheelbase of 2920mm. The front-wheel-drive version of the BYD Han has an electric motor with a maximum power of 163 kW and a maximum torque of 330 N·m. The all-wheel-drive version features a combined motor power of 363 kW and a combined torque of 680 N·m. The hybrid version is equipped with a 2.0-liter turbocharged engine, delivering a maximum power of 192 horsepower and a maximum torque of 320 N·m.
Was this review help?
17
2
Share
More Forum Discussions

What is the reason for the Audi Q5L's alarm going off without reason after locking the car?

Audi Q5's alarm sounding after locking the car may be due to doors not being closed tightly, or interference signals from similar alarms of other vehicles. Below is an introduction to the Audi Q5:1. Introduction: It is a dynamic and versatile SUV. With its excellent performance and technical advantages, the Michelin Pilot Preceda PP2 high-performance sports tire has recently become the original equipment tire for the premium mid-size SUV Audi Q5.2. Features: It perfectly combines the body design of a sports car, efficient power and sensitive handling, the off-road safety performance of an SUV, and the excellent comfort and flexible interior space of a station wagon, continuing the advantages of the third-generation top SUV Audi Q7. The powerful green efficient engine, quattro all-wheel drive system, and sensitive driving mechanism make it effortless whether driving on the road or off-road. The application of new technologies such as the 7-speed dual-clutch Stronic transmission and Audi drive select once again interprets Audi's brand concept of 'Vorsprung durch Technik' (Advancement through Technology).
8
2
Share

What is the fuel consumption of the 2010 X-Trail 2.5 4WD Luxury Edition?

The fuel consumption of the 2010 X-Trail 2.5 4WD Luxury Edition is 12.5L/100km. Below is a related introduction to the vehicle's fuel consumption per 100 kilometers: 1. Introduction to fuel consumption per 100 kilometers: Fuel consumption per 100 kilometers refers to the amount of fuel consumed by a vehicle traveling 100 kilometers on the road at a certain speed. It is a theoretical indicator of the vehicle. The fuel consumption per 100 kilometers is a value measured by the manufacturer in an objective environment using a dynamometer installed on the vehicle's chassis, converted into speed parameters, and then calculated under specified speed conditions to determine the theoretical experimental fuel consumption data per 100 kilometers for the model. 2. Calculation method for fuel consumption per 100 kilometers: Calculation method: (Refueling amount ÷ Fuel price) ÷ Kilometers driven × 100 = Fuel consumption (liters). Most vehicles now display the fuel consumption per 100 kilometers.
15
4
Share

What is the fuel consumption of a 10-year-old Chery A3?

10-year-old Chery A3 has a fuel consumption of 7.5-9L per 100 kilometers. Here is the relevant introduction of Chery A3: 1. Appearance: The appearance of Chery A3 was designed by the famous Italian car design company Pininfarina. The body proportions are harmonious and the lines are smooth. Among the current independent brand cars, it can definitely be considered one of the best, with a feeling of an international big brand. 2. Configuration: One feature of Chery A3's configuration is the inclusion of ESP. Although it is not standard across all models, among independent and joint venture brands, Chery has already taken the lead.
3
0
Share

What is the wheel size of the Audi Q5L?

Audi Q5L wheel 19-inch parameters are 235/55-R19. The tire width is 235 millimeters, 55 is the aspect ratio, which is the ratio of the tire sidewall height to the tire section width, and 55 represents 55%. R19 refers to the use of 19-inch rims. Precautions for using Audi Q5L tires are as follows: 1. Maintain correct tire pressure: Tire pressure is an important factor affecting tire life. It should not be too high or too low. Inflate according to the tire pressure indicated on the vehicle. 2. Check wear conditions: Frequently check the tires for abnormal wear and observe whether the tread depth on both sides of the tire is consistent. There is a wear limit mark on the tire, and the tire must be replaced when it wears to this mark. 3. Regularly check tire conditions: Remove small stones and other foreign objects from the tire tread in time, and check whether the tire has bulges, cracks, or aging rubber on the valve stem. Pay attention to the wear on the tire tread and edges, which may be caused by poor alignment or abnormal tire pressure. 4. Check wheel alignment and balance in time: If the tire shows uneven wear, pulling, vibration, or abnormal steering, check the tire alignment and balance immediately. These conditions not only shorten tire life but also affect the vehicle's handling performance.
12
2
Share

What type of gasoline should be used for the Audi Q5L?

The manufacturer recommends using 95-octane gasoline for the Audi Q5L. Below is relevant information about automotive gasoline: 1. Gasoline octane rating: Refers to the octane number indicating anti-knock performance. The higher the octane rating, the better the anti-knock performance. The octane rating of gasoline used in a car is determined by the engine's compression ratio. A higher compression ratio requires gasoline with better anti-knock performance. Lower-octane gasoline (e.g., 92, 93, etc.) is more easily ignited during piston operation, while higher-octane gasoline (e.g., 95, 98, etc.) is relatively harder to ignite. 2. Precautions: 95-octane and 98-octane gasoline should not be mixed. Long-term mixing of different octane ratings will affect the service life of the car's ignition system, fuel injectors, and spark plugs, advancing the vehicle's major maintenance schedule. However, since their chemical compositions and other aspects are relatively similar, with strong anti-knock properties, short-term mixing of different octane ratings generally does not require special vehicle maintenance. Whenever possible, strictly follow the vehicle's requirements to use the corresponding octane-rated gasoline.
2
1
Share

How to reset the maintenance light on the Fengjun 7?

The method to reset the maintenance reminder light on the Fengjun 7 is as follows: 1. Turn off the ignition switch and stop the engine. Press and hold the right button (reset) on the instrument panel with your left hand; 2. While continuing to hold the right button with your left hand, turn on the ignition switch. Keep holding the "reset" button until the maintenance light enters reset mode, then release the right button (reset button); 3. Within 20 seconds of releasing the right button, press the left "menu button" once to confirm the reset. More related information: The Fengjun 7 is a new-generation internet-connected pickup truck launched by Great Wall Motors, equipped with a "China Core" engine model GW4D20D, paired with a 6-speed manual transmission.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.