How many seconds does the BMW RR take to reach 100 km/h?

1 Answers
TaylorAnn
07/30/25 10:35am
BMW RR reaches 100 km/h in 2.3 seconds. Introduction to BMW RR motorcycle: This motorcycle features a "big and small eye" design at the front, equipped with a 4-cylinder four-stroke water-cooled and oil-cooled naturally aspirated engine. It delivers a maximum torque of 112 Nm and a maximum power of 142 kW, with a top speed of 299 km/h. When the speed limiter is removed, it can exceed 330 km/h. The bike has a length of 2056 mm, a width of 826 mm, a seat height of 820 mm, a 17.5L fuel tank, and a curb weight of 178 kg. It comes standard with ABS systems on both front and rear wheels. Introduction to BMW S1000RR: The BMW S1000RR is a superbike, with its first model released in 2009. It is powered by a four-stroke inline four-cylinder water-cooled engine with a total displacement of 999 cc, delivering up to 193 hp at 13,000 rpm and a maximum torque of 112 Nm at 9,750 rpm. It has a top speed exceeding 300 km/h, with acceleration times of 2.9 seconds from 0-100 km/h and 5.91 seconds from 0-200 km/h. Additionally, the BMW S1000RR superbike emphasizes lightweight design, featuring an aluminum frame and a total weight of only 206.5 kg when fully fueled.
Was this review help?
10
4
Share
More Forum Discussions

What is the difference between Repsol Sintetico and Repsol Moto Racing?

Here are the differences between Repsol Sintetico and Repsol Moto Racing: Different sports performance: Both Sintetico and Moto Racing are fully synthetic motorcycle engine oils produced by Repsol. However, in terms of sports performance, Moto Racing is better than Sintetico. Because Moto Racing is a competitive engine oil, it emphasizes acceleration performance, high-temperature resistance, and high-speed performance. Different replacement cycles: Since Moto Racing contains excessive additives, it deteriorates faster than Repsol Sintetico and requires more frequent oil changes. Sintetico is a civilian fully synthetic oil with good overall performance, suitable for daily use, and deteriorates slower than Moto Racing, so it does not require frequent oil changes.
2
1
Share

What is the top speed of the Suzuki GSX250?

The top speed of the Haojue Suzuki GSX250 motorcycle is approximately 140 km/h. In actual operation, the achievable speed may vary depending on factors such as the vehicle's condition, road conditions, and the rider's skill level, but under normal circumstances, the difference should not be significant. Below is a detailed introduction to Suzuki: Trademark: Suzuki (SUZUKI), established in 1920, is a Japanese automobile manufacturing company. The 'S' in the Suzuki logo is the first capital letter of 'SUZUKI,' conveying a sense of infinite power and symbolizing the unlimited development of Suzuki Motor Corporation. Suzuki provides high-quality products to customers worldwide and offers excellent service to those who use Suzuki products. Main products: automobiles, motorcycles, outboard motors, motorboats, elevators, etc.
9
4
Share

How Often Should Mazda Transmission Fluid Be Changed?

Mazda transmission fluid should be changed every two years or every 40,000 kilometers. When changing the transmission fluid, the oil filter screen should also be replaced simultaneously, as it cannot be thoroughly cleaned and must be renewed. Transmission fluid is an essential lubricant that maintains the cleanliness of the gear system and prolongs the lifespan of the transmission components. Below is relevant information about Mazda: Introduction: Mazda (MAZDA) is a Japanese automobile manufacturer headquartered in Hiroshima, Japan, founded in 1920. Mazda's vehicle models are primarily sold in Asia, Europe, and North America. MAZDA is one of Japan's most renowned automotive brands, the fourth-largest automobile manufacturer in Japan, a world-famous car brand, and the only automotive company in the world that develops and produces rotary engines. Mazda's Classification: Mazda's lineup includes Changan Mazda, FAW Mazda, and imported Mazda vehicles.
12
2
Share

Why was the Wuling Zhiguang V discontinued?

The discontinuation was due to the vehicle's low configuration and poor comfort, although the Wuling Zhiguang V performs well as a utility vehicle. Below are the relevant details: Exterior: The Wuling Zhiguang V features a more stylish design, with triangular headlights paired with a single horizontal grille, along with a more design-forward front bumper and fog light styling, giving the front fascia a touch of homey appeal amidst its modern look. Powertrain: In terms of power, the Wuling Zhiguang V is equipped with an N12-type 1.2L i-VVT naturally aspirated engine, delivering a maximum power of 82 horsepower and a peak torque of 116 Nm. For the transmission system, it is paired with a 5-speed manual gearbox.
18
1
Share

Can You Hold Both a Car Driver's License and a Motorcycle License Simultaneously?

Yes. Below is the relevant information: Motorcycle driving licenses: The licenses for driving motorcycles are D, E, and F. A D license allows you to drive all two-wheeled and three-wheeled motorcycles, an E license permits driving all two-wheeled motorcycles, and an F license only allows driving lightweight motorcycles with an engine displacement below 50CC. If you drive a motorcycle with only a car driver's license, it is considered driving a vehicle that does not match the permitted vehicle type on your license, which is equivalent to driving without a license. Important notes: The motor vehicle driving license records and endorses the following information: motor vehicle driver information, including name, gender, date of birth, nationality, address, identification number (motor vehicle driving license number), and photo.
20
0
Share

Where to Place the Car Shock Absorber Shim?

It should be placed at the closest point to the body panel when the car door is closed. Below is a related introduction to the door shock absorber shim: Function: It prevents the shock absorber from coming into contact with the car body. When the car turns, the center of gravity shifts to one side, causing the body to tilt and compress the spring. The shim then provides support, helping to reduce the car's body roll. Material: The shim is made of paper, rubber, or copper and is placed between two surfaces to enhance sealing. It serves as a sealing element between static sealing surfaces to prevent fluid leakage. It is installed on the car body by adhesion, and the adhesive material is usually very mild, so it will not damage the surface of the car body.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.