How many seconds does the BMW 325 take to accelerate from 0 to 100 km/h?

1 Answers
SanColeman
07/29/25 10:44pm
BMW 325 takes 12.9 seconds to accelerate from 0 to 100 km/h in urban areas, 6.7 seconds on highways, with an average acceleration time of around 9 seconds. The BMW 325 belongs to BMW's high-quality series and features high-end configurations. It is equipped with a 2.5L inline 6-cylinder engine, with a maximum power output of 141 KW. The typical fuel consumption ranges between 10 to 13 liters per 100 km, though the exact consumption depends on the driver's habits and driving conditions. Acceleration from 0 to 100 km/h is the most intuitive reflection of a car's power performance. Acceleration times for other vehicles: Compact cars with 1.6L engines typically achieve 11 to 13 seconds, mid-size sedans with 2.0T engines range between 7 to 8 seconds, while supercars mostly accelerate in less than 3.8 seconds. Among vehicles with the same displacement, those equipped with turbocharged engines show significant advantages in 0-100 km/h acceleration due to their stronger power output and a wide torque range, enabling maximized acceleration at very low RPMs. However, 0-100 km/h acceleration is not the universal standard for evaluating a vehicle's power performance, especially when the acceleration times of two vehicles are close.
Was this review help?
1
4
Share
More Forum Discussions

What are the impacts of a car that has been in an accident?

An accident-damaged car can still be driven after repairs, but there is a certain gap compared to an original, accident-free car. When sold as a used car, the price of a vehicle that has been in an accident will be significantly lower than the market price, resulting in lower cost-effectiveness. Below is relevant information: 1. Definition: An accident-damaged car refers to a vehicle that has suffered damage due to non-natural wear and tear from an accident, leading to a decline in its mechanical performance and economic value. It can also refer to a vehicle with structural damage. 2. Identification: Generally, whether a car is an accident-damaged vehicle can be determined through exterior inspection, headlight examination, reviewing clear insurance records, and checking the engine compartment. When considering purchasing an accident-damaged car as a used vehicle, it is essential to evaluate whether its performance poses any safety risks.
2
3
Share

How many brake discs does a car have?

A car has 4 brake discs, 2 on the front wheels and 2 on the rear wheels. The brake calipers clamp the brake discs to generate braking force. When the brakes are applied, the calipers grip the discs to slow down or stop the vehicle. Working principle of brake discs: The brake disc, wheel cylinder, brake caliper, oil pipe, and other components work together under hydraulic control. The brake disc on the wheel rotates with it, while the wheel cylinder is fixed to the base plate. The brake caliper is positioned on both sides of the brake disc, and hydraulic pressure pushes the friction pads against the disc to generate braking force. Many brake discs also feature small holes for heat dissipation, known as ventilated disc brakes, which help improve braking efficiency by dissipating heat promptly. In terms of heat dissipation, larger brake discs are more effective than smaller ones. Brake disc failure: If you experience brake shudder while driving, it may indicate that the brake disc has warped. Warping occurs due to rapid wear or the presence of foreign particles, making the disc surface uneven and causing vibrations during braking. Continued use of warped brake discs can severely impair braking performance, increasing stopping distances and potentially leading to issues such as vehicle drift, inability to steer, or brake failure. Therefore, any detected problems should prompt immediate replacement of the brake discs. Brake disc replacement: The replacement threshold for brake discs is around 2 mm of wear. If the wear exceeds this limit, the disc may fracture under clamping pressure. Under normal driving conditions, front brake pads typically last between 20,000 to 40,000 kilometers, while rear brake pads last between 60,000 to 100,000 kilometers.
4
2
Share

What are the reasons for the power steering failure in BMW 3 Series?

Here are the specific reasons for the power steering failure in BMW 3 Series: 1. Dirty power steering fluid: The power steering fluid acts as a force transmission medium. If the fluid is dirty, it can cause poor circulation, making steering difficult. In severe cases, the power steering pump may also produce abnormal noises. 2. Insufficient or leaking power steering fluid: Insufficient power steering fluid means reduced power assistance. Check the related systems for any signs of fluid leakage. Focus on inspecting the power steering fluid reservoir, power steering hoses, and steering gear. 3. Loose or overly tight power steering belt: Alternatively, the belt may be worn out. The tension can be adjusted, but a worn-out belt must be replaced.
6
4
Share

What is the oil filling standard for a hydraulic coupling?

The oil filling amount for a hydraulic coupling is 70%-80%. Below are the precautions for using a hydraulic coupling: 1. Avoid rapid and frequent forward and reverse rotation: In theory, the coupling can rotate both forward and reverse, but rapid forward and reverse rotation can cause excessive inertia and damage the coupling's connecting parts. Therefore, strictly follow the operating procedures to avoid rapid and frequent forward and reverse rotation, especially when using the coupling on tower cranes and bridge crane hosts. 2. Same rotation direction: The rotation direction of the coupling's output shaft is the same as that of the motor shaft. During the initial test run, check whether the motor's rotation direction meets the requirements.
7
3
Share

How to Use the Clutch in a Manual Transmission?

Manual transmission uses the clutch in the following ways: 1. Starting: Quickly lift the clutch pedal until reaching the semi-engagement point, then slow down the lifting speed; 2. Gear shifting: Operate the clutch pedal by quickly pressing down and lifting, paying attention to coordination with the throttle; 3. Posture: Place the sole of the left foot on the clutch with the heel touching the floor, and adjust the seat so that the clutch can be fully depressed with the foot slightly bent. Precautions for using the clutch in a manual transmission include: 1. Avoid pressing the clutch for extended periods or resting the foot on the pedal to prevent premature wear of the release bearing; 2. Do not press the clutch first during emergency braking to avoid losing engine braking.
14
2
Share

How to use the cruise control on Audi A4L?

The method to use the cruise control on Audi A4L is: 1. Pull the lever inward to enter the standby cruise state, and the cruise icon will be displayed on the instrument panel; 2. When the vehicle speed reaches the specified speed or above, press the cruise control button; 3. During cruise control, pulling the lever upward can increase the vehicle speed, and pulling it downward can decrease the vehicle speed; 4. Pushing the lever outward can temporarily exit the cruise function, and pulling it inward can resume the cruise function; 5. Pushing the lever all the way outward will exit the cruise control. The Audi A4L is a medium-sized 4-door 5-seater sedan with body dimensions of: length 4858mm, width 1847mm, height 1439mm, and a wheelbase of 2908mm.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.