How many seats does the Toyota Land Cruiser have?

1 Answers
MacAnthony
07/29/25 5:48pm
There are seven-seater and eight-seater models. Taking the Land Cruiser 4000 as an example, here is an introduction to its model: 1. Exterior: The front combination headlights of the Land Cruiser 4000 slightly curve upwards on both sides, complementing the wide metal grille and the differently colored front bumper, exuding a domineering presence like a king. The broad chrome front grille of the Land Cruiser 4000 still looks imposing, with the horizontal grille design differing from the previous generation, forming an opposite design. 2. Cultural design: The commanding appearance of the Toyota Land Cruiser 4000 cannot be fully described in words—it combines stability with abundant sportiness. The newly designed bumper and grille give the front face a more dynamic look, exuding authority effortlessly. The body-colored bumper enhances the visual integrity of the vehicle while elevating its class. Compared to the older models, it is longer, wider, and lower, enhancing the dynamic effect. The 'eyes' of the Toyota Land Cruiser 4000 have become more stylish, illuminating off-road paths. The slightly streamlined exterior incorporates a touch of urban elements, and the front bumper further showcases robust sportiness.
Was this review help?
1
4
Share
More Forum Discussions

Is it normal for a BMW fan to keep running at low speed?

It is normal as the fan's function is to dissipate heat. Here are the relevant explanations: 1. Speed principle: If the engine temperature remains in a relatively low range, the fan speed will naturally decrease. If the engine temperature consistently stays in a higher range, the fan speed will increase. It's necessary to check the relationship between engine temperature and fan speed. If it aligns with the above sequence, there should be no issue. If not, it needs to be inspected. 2. Cooling system: The function of the car's cooling system is to maintain the vehicle within an appropriate temperature range under all operating conditions. It consists of the cooling fan, expansion tank, thermostat, water jackets in the engine block and cylinder head, and auxiliary devices.
3
1
Share

How to Determine Whether Transmission Fluid Needs to Be Replaced?

To determine whether transmission fluid needs to be replaced, observe the following signs: if the car's gear shifting feels stiff or not smooth, there is unusual noise from the transmission, the body shakes, or the car accelerates slowly, it indicates that the transmission fluid needs to be changed. The functions of transmission fluid are: to keep the gear system clean and to lubricate the transmission device, thereby extending its lifespan. The functions of the transmission are: 1. To change the transmission ratio to meet the traction needs under different driving conditions; 2. To enable reverse driving; 3. To interrupt power transmission to the drive wheels when the engine starts, idles, the car shifts gears, or needs to stop for power output.
4
1
Share

How to Clean Dirty Seat Belts?

Methods to clean dirty seat belts: 1. Use foam cleaner to clean. Evenly spray the cleaner on the contaminated seat belt, wait for a moment, then scrub with a soft brush like a shoe brush, and wipe off the foam with a towel; 2. Use a neutral soap solution to clean. Extend the seat belt to the buckle to fix it and prevent it from retracting, scrub the soap solution on the stained area with a soft brush, rinse with clean water after thorough scrubbing; 3. Take the car to an auto beauty shop for interior steam cleaning, which can disinfect and treat stains in the car. Car seat belts, also known as safety belts, are a type of occupant restraint device.
2
1
Share

How to Replace the Kia K3 Horn by Yourself?

Methods to replace the Kia K3 horn by yourself: 1. Prepare the tools needed for removing the door horn; 2. Locate the wiring harness connector of the door horn and unplug it. The horn is fixed to the door panel with rivets, so you need to use an electric drill to break the rivets, then gently pry the horn upwards with your hands to remove it. The Kia K3 is the third K-series model introduced by Dongfeng Yueda Kia, equipped with the same powertrain as the Hyundai Elantra, featuring 1.6L and 1.8L engines. In terms of body dimensions, the Kia K3 measures 4600mm in length, 1780mm in width, 1445mm in height, with a wheelbase of 2700mm.
8
4
Share

How to Bleed Air from the Wuling Hongguang Engine Coolant System?

The method to bleed air from the Wuling Hongguang engine coolant system is: 1. Start the car until the coolant temperature reaches 90 degrees, then turn off the engine and let it cool down to room temperature; 2. Open the driver's door, pull the hood release lever, and lift the hood; 3. Unscrew the radiator cap to release internal high-pressure gas; 4. Top up the coolant to the MAX level in the coolant reservoir to complete the operation. Taking the 2020 Wuling Hongguang as an example, it is a microvan with body dimensions of: length 4390mm, width 1660mm, height 1750mm, wheelbase 2720mm, fuel tank capacity 50L, and curb weight 1185kg.
20
1
Share

Are the Three Major Components of the Murano Imported?

Murano's three major components are imported. The relevant details about the Murano are as follows: 1. Specific Configuration: The Murano is equipped with a 2.5T supercharged engine, model QR25DER, with a maximum horsepower of 245. Additionally, Nissan has fitted the Murano with an HEV hybrid system, indicating that the Murano also boasts commendable fuel efficiency, along with its excellent off-road capability, spacious interior, and strong brand appeal. 2. Advantages: As an SUV model, the Dongfeng Nissan Murano performs admirably in terms of exterior design, power, and handling, attracting numerous consumers. It delivers satisfactory performance in power, with responsive throttle and good acceleration; the gear shifts are smooth, and the power output is gentle yet robust.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.