How many seats does the Nissan Qashqai have?

On which dates is the Subject 3 test held each month?

Subject 3 tests are scheduled every day except weekends and national statutory holidays each month. Applicants can book the test on the [Traffic Management 12123] platform. The specific method is to find "Driver's License Services" on the [Traffic Management 12123] app homepage and click "Book Test." After reading and agreeing to the terms, you will enter the test site selection, which offers two modes: self-selection or system arrangement. Self-selected test sessions and times are fixed, while system-arranged ones are not. Subject 3 test process: There are a total of 16 steps, which are: vehicle preparation, starting, straight-line driving, gear shifting operations, left turn at intersections, right turn at intersections, lane changing, passing through intersections, pulling over, crossing pedestrian crossings, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and nighttime driving. There are two main challenges in the Subject 3 test: The first is speed and gear mismatch. Errors such as high gear with low speed or low gear with high speed should be avoided during the test. Before shifting gears, ensure the speed matches the intended gear, then proceed with the shift. During driving, glance at the speedometer every eight seconds to prevent such mistakes. The second challenge is deviation from straight-line driving. While you cannot make large steering adjustments during straight-line driving, if the vehicle was not properly aligned before the test or you notice a deviation during the test, you can make minor steering adjustments, typically within 5 degrees. This will gradually correct the vehicle's trajectory over a longer distance, after which you can straighten the steering wheel.

4

0

Share

Can National II gasoline vehicles pass annual inspection?

National II gasoline vehicles can pass annual inspection. There are no national regulations requiring the unified scrapping of National II vehicles in 2021, so they can undergo normal vehicle inspection. Annual inspection process: Drive the vehicle to the inspection station entrance and wait for inspection (remove valuables from the vehicle). Hand the vehicle over to inspectors for online testing, while the owner waits to pick it up. After inspection, staff will issue an inspection report, payment receipt, and bind the insurance policy copy. Pay the inspection fee. Annual inspection procedures: First, after submitting the inspection application, proceed with online testing. Drive the vehicle into the automatic testing area to sequentially check whether the exhaust emissions, speed, lights, side slip, and chassis meet standards. All items must pass to proceed. Next is the appearance inspection, verifying the vehicle's license plate, type, body color, engine number, VIN code, and frame number for accuracy. Then inspect the vehicle exterior, checking details such as the bumper, engine compartment, rearview mirrors, lower mirrors, window glass, paint, engine operation status, and for passenger vehicles, the interior and wheels. Finally, the owner can obtain the inspection report and application form from the inspector. If all items pass, they can proceed to pay the inspection fee and receive the vehicle license and compliance label. If any items fail, the owner must repair the vehicle and participate in re-inspection until all items pass before completing the visa procedures.

16

3

Share

What are the tips for passing the S-curve in Subject 2?

Subject 2 S-curve driving techniques, the simplest method to navigate an S-curve: control the speed, find the reference points, and adjust the direction. The S-curve in Subject 2 is essentially a series of continuous turns. Control the speed: To avoid crossing the lines during the curve, the first step is to control the speed. If the car is about to cross the line, you can adjust the steering wheel to correct the course in time. However, stopping midway is not allowed in Subject 2. Maintain control of the speed, and provide power by pressing the clutch in the curve. If the power is insufficient and the car stops, restart it immediately to avoid a 5-point deduction. Failing to restart within 3 seconds will result in an immediate failure. Find the reference points: There is a set of universal reference points for curve driving, applicable to most test vehicle models, focusing on three points. Taking right entry as an example. First point: When the left 1/3 of the car hood aligns with the yellow line on the right side of the S-curve, turn the steering wheel fully to the left. Second point: When the top of the left car hood aligns with the yellow line on the left side of the S-curve, straighten the steering wheel. Third point: When the right 1/3 of the car hood aligns with the yellow line on the left side of the S-curve, turn the steering wheel fully to the right. Once the car hood exits the S-curve, gradually straighten the steering wheel and drive out of the S-curve. Adjust the direction: Keep an eye on the left rearview mirror to observe the distance between the wheel and the yellow line of the S-curve. Try to maintain a distance of about one finger's width between the wheel and the line. As long as the left side doesn’t cross the line, the right side won’t either.

13

3

Share

What Causes Intermittent Engine Power?

Intermittent engine power in a car is often caused by insufficient fuel. Introduction to Engine Power: The primary power source of a car engine is the gasoline in the cylinders. The cylinders are the origin of the driving force in a car. Regardless of how high a speed the car can reach, how steep a slope it can climb, or how heavy a load it can pull, all the power comes from inside the cylinders. Fuel burns inside the cylinders to push the pistons, which then transmit the force through connecting rods, crankshafts, transmissions, and drive shafts, ultimately delivering power to the wheels and propelling the car forward. Factors Affecting Engine Power: Engine parameters that influence power include maximum engine power, maximum engine torque, and the shape of the engine's external characteristic curve. The impact of the final drive ratio is also significant. The selection of the final drive ratio mainly depends on the car's purpose and the road conditions it frequently encounters. The number of gears in the transmission system also plays a role. Without auxiliary transmissions or transfer cases, the number of gears in the transmission system is simply the number of forward gears in the transmission. Increasing the number of transmission gears allows the engine to operate closer to its maximum power more often, thereby increasing the engine's average power. The transmission gear ratios also matter, including the minimum and maximum gear ratios and the proportional relationship between the ratios of each gear. The car's aerodynamics influence its power as well. The air resistance coefficient affects the car's dynamic performance. Aerodynamics significantly impact the power and fuel efficiency of high-speed cars but have little effect on the maximum road resistance the car can overcome.

7

0

Share

How to Pay for Vehicle Insurance by Yourself?

Carry the vehicle license; the previous year's insurance policy; generally, no need to provide these when renewing with the same company, but some companies may require them when switching to another insurer. Purchase at a 4S store; call the insurance company's customer service to buy auto insurance; purchase auto insurance online on the insurance company's official website; find an insurance agent to buy.

19

2

Share

What is the insurance company's process for handling vehicle scrapping?

The at-fault driver (the insured) must report the incident to the insurance company within 24 hours and carefully fill out and sign the claim notice. Promptly inform the insurance company of the location of the damaged vehicle to facilitate vehicle inspection and damage assessment. Compensation for property damage requires obtaining corresponding receipts and vouchers. These documents are necessary for processing insurance claims after the vehicle is repaired and the accident case is closed.

9

0

Share

How many seats does the Nissan Qashqai have?

On which dates is the Subject 3 test held each month?

Can National II gasoline vehicles pass annual inspection?

What are the tips for passing the S-curve in Subject 2?

What Causes Intermittent Engine Power?

How to Pay for Vehicle Insurance by Yourself?

What is the insurance company's process for handling vehicle scrapping?

Is It Respectful to Take Off Shoes in a Car?

Whose technology is the Emgrand engine?

How Long Does It Take for Subject Two to Be Accepted?

How Often Should a Motorcycle Be Serviced?