How many seats does the Nissan Livina have?

Should Oil Leakage in Motorcycles Be Repaired?

Oil leakage in motorcycles should be repaired. The reasons for oil leakage in motorcycles are as follows: Oil Seal Failure: The rubber material of the oil seal may break or harden, losing its elasticity. The sharp edge of the oil seal that scrapes oil may wear out, turning into a rounded shape and losing its oil-scraping ability. Additionally, the oil seal spring may fall off or weaken, all of which can cause the oil seal to fail and lead to oil leakage. Fork Tube Damage: If the fork tube is bent or becomes out of round due to impact, or if the electroplated surface of the fork tube is partially worn off due to friction, it can result in poor sealing and oil leakage. Poor Fork Tube Manufacturing Quality: Some fork tubes have surface roughness that does not meet requirements, lack electroplating finishing, or even show visible machining marks, causing rapid wear of the matching oil seal and resulting in oil leakage.

13

5

Share

What is the general load capacity of a motorcycle?

The load capacity of an ordinary motorcycle is generally within the range of 150 kg to 250 kg. Here are some tips for purchasing a motorcycle: Appearance inspection: Check whether the motorcycle's paint is bright and even, and assess the quality of the paint. Inspect the surface of chrome-plated parts for brightness, any exposed damage or spots. Ensure welded joints are smooth, machined surfaces are polished, and all components of the vehicle are intact and undamaged. Verify that the front and rear shock absorbers are properly aligned. Engine inspection: The engine should start quickly and reliably. Test ride inspection: If conditions permit, take a short test ride on the road to check for normal operation of the transmission and drive components, ensure the engine does not overheat, and confirm smooth power delivery.

3

2

Share

What is the load capacity of a motorcycle in kilograms?

125cc motorcycles have a load capacity between 130 to 140 kilograms, while 150cc models can carry approximately 140 to 160 kilograms. Load capacities vary depending on the motorcycle model. Generally, a motorcycle consists of seven main components: the engine, transmission system, running gear, operating and braking system, cabin or cargo compartment, electrical system, and instrument panel. Additional Information: Wuyang-Honda: The WH100T-H Joy 100 scooter is designed with a load capacity of 150 kilograms, equivalent to the weight of two adults. However, in practical use, the actual load capacity can exceed this designed limit. Important Notes: After riding, always turn off the electrical circuits and lock the motorcycle. Check for any abnormalities in the lights and electrical components. Park the motorcycle stably, preferably using the center stand to reduce tire load and extend tire lifespan.

11

2

Share

What is the lifespan of brake pads?

Under normal driving conditions, the service life of front brake pads is approximately 30,000-50,000 kilometers, while rear brake pads last about 60,000-100,000 kilometers. Once severe wear is detected, immediate replacement is necessary. Brake Pads: Also known as brake linings. In a vehicle's braking system, brake pads are the most critical safety components that play a decisive role in all braking performance. Therefore, high-quality brake pads serve as guardians for both drivers and vehicles. Composition: Brake pads typically consist of steel plates, adhesive heat insulation layers, and friction blocks. The steel plates undergo anti-rust coating processes, with temperature distribution during coating monitored by SMT-4 oven trackers to ensure quality. The insulation layer comprises non-heat-conductive materials designed for thermal insulation. Friction blocks are composed of friction materials and adhesives, which create friction against brake discs or drums during braking to decelerate the vehicle. Due to friction effects, these blocks gradually wear out, with generally lower-cost brake pads wearing faster.

6

1

Share

Can a motorcycle still be inspected after two years of overdue inspection?

A motorcycle that has been overdue for inspection for two years can still be inspected. When applying for inspection, you need to provide the vehicle license, compulsory traffic accident liability insurance certificate, vehicle and vessel tax payment or tax exemption certificate, and motor vehicle safety technical inspection certificate. The relevant information is as follows: Relevant regulations: According to Article 49 of the "Motor Vehicle Registration Regulations", the owner of a motor vehicle can apply for an inspection compliance mark at the vehicle management office of the registration location up to three months before the expiration of the motor vehicle inspection period. Before application: Before applying, the owner of the motor vehicle must resolve all traffic safety violations and accidents related to the vehicle. When applying, the owner must fill out an application form and submit the vehicle license, compulsory traffic accident liability insurance certificate, vehicle and vessel tax payment or tax exemption certificate, and motor vehicle safety technical inspection certificate.

3

4

Share

What procedures are required for the annual inspection of a motorcycle's driving license?

For the motorcycle inspection, you need to prepare the original and a copy of the motorcycle's driving license, personal ID card, and the original of the compulsory traffic insurance policy. Ensure that any previous traffic violation records are settled before the annual inspection. After confirming there are no outstanding violations, take the relevant documents to the insurance company to verify the insurance policy. Then, you can proceed to the motor vehicle inspection site with the above documents for the vehicle inspection. Below are the details of the motor vehicle annual inspection: Document Check: Check if the vehicle comes with a user manual, certificate of compliance (for imported vehicles, the commodity inspection certificate), and whether the factory inspection marks on the vehicle body are complete. Measuring the Internal and External Dimensions of the Vehicle: Measure the internal and external dimensions, wheelbase, and axle track of the vehicle. Specific measurements include the vehicle's length, width, height, the height and area of the cargo compartment, wheelbase, and axle track. Filling Out the Alteration Registration Form: Conduct the inspection item by item according to the technical standards. If the vehicle passes, fill out the "Initial Inspection Alteration Registration Form for Motor Vehicles" and specify the unladen weight, load capacity, passenger capacity, and the number of occupants in the driver's cabin as per the manufacturer's specifications.

3

Share

How many seats does the Nissan Livina have?

Should Oil Leakage in Motorcycles Be Repaired?

What is the general load capacity of a motorcycle?

What is the load capacity of a motorcycle in kilograms?

What is the lifespan of brake pads?

Can a motorcycle still be inspected after two years of overdue inspection?

What procedures are required for the annual inspection of a motorcycle's driving license?

How to Drive a Manual Transmission Car During the Break-in Period?

How long after expiration can a motorcycle still pass its annual inspection?

Can Points Be Deducted Again After Clearing 23 Points?

Does applying a motorcycle wrap require registration?