How many seats does the BMW X7 have?

2 Answers
HavenMarie
07/23/25 11:14pm
BMW X7 is available in 6-seat and 7-seat configurations (depending on whether independent seats are chosen for the second row). In terms of body dimensions, the BMW X7 measures 5151mm in length, 2000mm in width, and 1805mm in height, with a wheelbase of 3105mm. The BMW X7 is a full-size SUV model, equipped with two engine options: a 3.0-liter turbocharged engine and a 4.4-liter twin-turbocharged engine. The BMW X7 features the iconic kidney grille, giving it high recognition. The waistline, which starts from the front fender and extends diagonally upward to the taillights, is similar to most BMW models.
Was this review help?
1
0
Share
KingstonDella
08/10/25 7:10pm
I've driven the BMW X7 several times and found its seating layout quite family-friendly. The standard configuration offers seven seats, with spacious and comfortable front row seating for two, decent space in the middle row's three seats, and the rear two seats working well for kids on short trips. I remember during our last family beach outing, folding down the third row created enough trunk space for surfboards and a barbecue grill – highly practical. Compared to the Mercedes GLS, the X7 has slightly less rear space, but handles more nimbly with no sluggishness on city street turns. Some owners might opt for the six-seat version featuring second-row captain's chairs and a walk-through aisle, though sacrificing one seat reduces some convenience. Based on my experience, the seven-seat version suffices for daily commutes or road trips, with reasonable maintenance costs and minimal seat upkeep concerns. Overall, if you regularly transport family or friends, the X7's seven-seat design delivers trustworthy safety and hassle-free usability.
Was this review help?
6
4
Share
Expand All
More Forum Discussions

How to Turn On the Rear Air Conditioning in Model 3?

Tesla Model 3 rear air conditioning can be turned on as follows: 1. Press the CLIMATE button on the center console panel, or touch the air conditioning icon on the entertainment main screen to enter the air conditioning settings interface. You can set the fan speed level, air outlet mode, internal and external circulation, and air conditioning temperature through the air conditioning buttons or corresponding icons in the air conditioning settings interface. 2. When adjusting the air conditioning settings through the center console panel, the entertainment main screen will briefly pop up the air conditioning settings information. The system automatically controls the fan speed, air outlet mode, air conditioning mode, and internal circulation to heat or cool the car interior to the desired temperature. 3. When the AUTO indicator light is on, the system is in full automatic operation mode. To put the system in automatic mode, press AUTO, set the temperature, wait a moment for the system to stabilize, and adjust to the most comfortable temperature as needed.
11
0
Share

What are the causes of idle vibration in the Hyundai Elantra?

The causes of idle vibration in the Hyundai Elantra: 1. Ignition system issues: Poor performance of the ignition system or improper spark plug firing can lead to idle vibration; 2. Unstable oil pressure: It is recommended that the owner visit a 4S shop to check the fuel supply pressure and the intake pressure sensor for normal operation. If the fuel pump supply pressure is abnormal or the intake pressure sensor values are incorrect or malfunctioning, it can cause body vibration; 3. Severe engine carbon buildup: When there is excessive carbon buildup inside the engine, the gasoline sprayed by the cold start injector can be largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts and making it difficult to start. In this situation, the engine will only start easily once the carbon deposits have absorbed enough gasoline to become saturated. After starting, the gasoline adsorbed on the carbon deposits will be drawn into the combustion chamber by the engine's vacuum suction and burned, making the air-fuel mixture overly rich. The engine's combustible mixture alternates between lean and rich, causing idle vibration after a cold start.
1
0
Share

Which country is BYD from?

BYD is a Chinese brand. Shenzhen BYD Co., Ltd. is a high-tech private enterprise with industrial clusters in IT, automobiles, and new energy. Its headquarters is located in Shenzhen, Guangdong. Representative models include traditional fuel vehicles such as the F3, F3R, F6, and F3, the S8 sports hardtop convertible, the high-end SUV model S6 and MPV model M6, as well as dual-mode electric vehicles like the F3DM and F6DM, and the pure electric vehicle E6. The BYD E6 is a pure electric vehicle independently developed by BYD, combining the design concepts of SUVs and MPVs, making it a high-performance crossover. Its body dimensions are 4554mm in length, 1822mm in width, and 1630mm in height, with a wheelbase of 2830mm. Both its power battery and starter battery use the ETPOWER iron battery independently developed and produced by BYD. It is also equipped with a permanent magnet motor that requires no maintenance for life, with a power output of 75KW.
7
0
Share

How to Replace the Battery in a BMW X5 Car Key?

BMW X5 car key battery replacement method: First, press the square button on the top right corner of the BMW X5 key's backside with your left hand, then pull out the mechanical key with your right hand. There is a small square on the top right corner of the key's back that can be pressed down. Pry open the operation hole of the remote key to open the back cover. Use tweezers to remove the battery, and then replace it with a new one of the same model. The BMW X5 is the first four-wheel-drive SUV model from the BMW brand. The dimensions of this car are 4909mm in length, 1938mm in width, and 1772mm in height, with a wheelbase of 2933mm. The BMW X5 achieves the level of a four-wheel-drive vehicle in terms of technical equipment and performance, featuring excellent handling sensitivity and stability. It incorporates a series of technologies, including four-wheel braking, automatic stability and traction control, and automatic dynamic stability control.
13
4
Share

What Causes the Upper Radiator Hose to Burst?

Car upper radiator hose bursts are caused by hose quality issues or aging, and may also result from excessive radiator pressure. Reasons for high radiator pressure include: insufficient coolant in the radiator, incomplete opening or failure of the fan, excessive scale buildup causing blockages, thermostat malfunction, or cylinder head gasket damage. Once a hose burst is detected, do not attempt to start or continue driving the vehicle. Seek professional inspection and repair/replacement before operating the vehicle again. Automotive radiators have two hoses: an upper and a lower hose. The upper hose connects the radiator's upper tank to the water pump outlet of the engine's cooling passage, while the lower hose links the radiator's lower tank to the engine cooling passage inlet. This creates a coolant circulation pattern where the engine follows a "lower inlet, upper outlet" flow, and the radiator operates with an "upper inlet, lower outlet" configuration. Coolant flows from the radiator's lower hose through the water pump into the engine for cooling, then exits the engine via the upper hose back to the radiator, completing this continuous cycle.
12
3
Share

What is the Mechanism of Automotive Performance Degradation?

Automotive performance degradation mechanisms can generally be categorized into tangible wear and intangible wear: I. Tangible wear can be divided into the first type of tangible wear and the second type of tangible wear: 1. The first type of tangible wear refers to the loss caused by the decline in automotive performance due to damage such as friction wear, deformation, and fatigue of components under load; 2. The second type of tangible wear refers to the chemical and electrochemical interactions between components and external media during idle periods, leading to corrosion of metal components, aging and deterioration of non-metallic products, and even loss of functionality. II. Intangible wear can also be divided into the first type of intangible wear and the second type of intangible wear: 1. The first type of intangible wear refers to the depreciation of the original model's value due to advancements in science and technology reducing the reproduction cost of cars with the same structure (same model); 2. The second type of intangible wear refers to the depreciation of the original model's value due to advancements in science and technology producing new cars with more advanced and efficient performance.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.