How many seats does the BMW i3 have?

1 Answers
Warren
07/29/25 5:38pm
The BMW i3 is a four-seater vehicle, which is a pure electric car under the BMW brand and has been well-received by many consumers since its launch. The BMW i3 is a single-motor model with a maximum motor power of 125 kW and a maximum torque of 250 Nm. Below are details about the model: 1. The BMW i3 has dimensions of 4006×1775×1600 mm and a top speed of 150 km/h. 2. The BMW i3 offers an optional range-extender version, which is equipped with a 0.647L two-cylinder gasoline engine. With the same power output, the curb weight increases from 1298 kg to 1430 kg, while the acceleration time remains unchanged. The daily driving range is 330 km, with a maximum range of 396 km. In the NEDC cycle, the i3 range-extender version consumes 11.5-11.9 kWh of electricity and 0.6L of gasoline per 100 km. The average fuel consumption for the hybrid version is around 3.2 liters, making it very fuel-efficient. 4. The new BMW i3 continues to feature a carbon fiber-reinforced plastic (CFRP) passenger cell and offers various seat material options, including leather and fabric. The new car adheres to the sustainable development concept, incorporating a significant amount of renewable materials in the interior.
Was this review help?
8
1
Share
More Forum Discussions

Symptoms and Judgment Methods of Damaged Car Bearings

When a car wheel bearing is damaged, the car will experience wheel wobbling, increased vehicle shaking, abnormal noises, and poor rolling, leading to a decrease in power. Here are the methods to determine if a car wheel bearing is damaged: 1. Listen for sounds: Observe whether the noise comes from the engine. If the noise does not change when coasting in neutral, it may indicate a problem with the wheel bearing. 2. Check the temperature: When the brake shoe and pad gaps are normal, there is a difference in temperature between the front and rear wheels, with the front wheels being slightly higher. 3. Inspect the wheels: Manually rotate each of the four wheels quickly; the problematic axle will produce a noise.
9
2
Share

Under what circumstances should the car anti-skid button be used?

Since the car anti-skid button is turned on by default, it means that the car anti-skid button should be kept on during normal driving. The main function of the car anti-skid button is to control the longitudinal and lateral stability of the vehicle to ensure that the vehicle drives according to the driver's intention. Additional information: The following situations are not recommended to turn on the car anti-skid button: 1. When the vehicle is stuck in mud or off-road: When the vehicle is stuck or in other off-road situations, appropriate wheel slip is needed to help escape and climb. 2. When encountering wheel slip during uphill driving in rain or snow: Because when starting on snowy or waterlogged roads, especially when going uphill, the wheels are prone to slip. At this time, the computer will identify the wheel slip and limit the engine output.
4
2
Share

What is the function of a fuel filter?

The main function of a fuel filter is to remove impurities from gasoline. The fuel filter can filter out harmful particles and moisture in the engine fuel system to protect components such as the fuel pump, injectors, cylinder liners, and piston rings, reducing wear and preventing blockages. It removes solid contaminants like iron oxide and dust contained in the fuel, preventing blockages in the fuel system (especially the injectors). This reduces mechanical wear, ensures stable engine operation, and improves reliability. Here are some points to note when replacing a fuel filter: 1. Beware of fuel leaks: After replacing the fuel filter or oil filter, pay attention to the sealing of the connections to prevent fuel leaks. 2. No smoking or open flames: Smoking and the use of open flames are strictly prohibited when replacing the fuel filter or performing maintenance on the fuel system.
2
3
Share

Is an operating permit required to drive for Didi?

Driving for Didi requires an operating permit. According to the "Interim Measures for the Management of Online Car-hailing Services," individuals engaged in the online car-hailing industry must apply for the "Online Car-hailing Transport Permit" and the "Online Car-hailing Driver's License" from the local taxi administration department. Otherwise, using a private car for Didi services is considered illegal operation. If caught, illegal income will be confiscated, and corresponding fines will be imposed. Additional information: Below are some considerations for driving for Didi: 1. Vehicle selection: Didi has requirements for vehicle models, so it's necessary to choose a suitable vehicle before operating. 2. Confirm the pickup location by phone when accepting an order: Incorrect locations can increase fuel consumption and waste time.
11
2
Share

How to Repair a Dented Car Bumper?

To repair a dented car bumper, you can pour boiling water over the dented area to restore the deformed body. Once the dent returns to its original shape, immediately use cold water to shrink and restore the rubber. The bumper consists of an outer panel, cushioning material, and a crossbeam. The outer panel and cushioning material are made of plastic, while the crossbeam is formed by cold-rolled thin sheets pressed into a U-shaped channel. The outer panel and cushioning material are attached to the crossbeam, which is then connected to the vehicle's frame longitudinal beams with screws. Additional information: Below are the functions of a car bumper: 1. Protective role: It absorbs and mitigates external impact forces during collisions, providing cushioning to protect both the vehicle and its occupants. 2. Decorative role: It harmonizes with the vehicle's body design, offering good aesthetic appeal.
8
2
Share

What is the difference between front-wheel drive, rear-wheel drive, and four-wheel drive?

The difference between four-wheel drive and rear-wheel drive lies in the number of driven wheels and handling characteristics. Here is some relevant knowledge about four-wheel drive systems: Definition of four-wheel drive system: Four-wheel drive means that all four wheels of the car can receive driving force. In this way, the engine's power is distributed to all four wheels, making it less likely for the wheels to slip when encountering poor road conditions, and significantly improving the vehicle's off-road capability. Four-wheel drive systems are mainly divided into two categories: part-time four-wheel drive and full-time four-wheel drive. Classification of four-wheel drive systems: There are three common types of four-wheel drive systems in cars: on-demand four-wheel drive, full-time four-wheel drive, and part-time four-wheel drive. Full-time four-wheel drive systems are often seen in luxury SUVs and high-performance sedans. Cars equipped with full-time four-wheel drive have power distributed to all four wheels at all times. This type of four-wheel drive system can enhance the mechanical grip of the wheels. Part-time four-wheel drive systems are often seen in rugged off-road vehicles. Cars equipped with part-time four-wheel drive have three modes: high-speed four-wheel drive, low-speed four-wheel drive, and high-speed two-wheel drive.
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.