How Many Seats Can a B2 License Drive?

1 Answers
DelOlive
07/24/25 4:16pm
B2 license can only drive vehicles with 9 seats or less, and small blue-plate passenger cars with a length of less than 6 meters. The vehicle types permitted under a B2 license include heavy and medium-duty trucks, mostly trucks such as dump trucks. It also includes large, heavy, and medium-sized specialized operation vehicles, which refer to vehicles equipped with special equipment or devices, such as sprinklers, concrete mixer trucks, fire trucks, etc. More details are as follows: 1. In addition to the above-mentioned vehicle types, the B2 license also covers all vehicle types permitted under C1, C2, C3, C4, and M. These include small and micro passenger cars (with 9 or fewer passengers), three-wheeled vehicles, wheeled self-propelled machinery, and light, small, and micro steering operation vehicles. 2. It is important to note that B2 and B1 do not have an inclusive relationship like C2 and C1. The similarity between B2 and B1 is that both include the vehicle types permitted under C1, C2, C3, C4, and M. The difference lies in that B2 permits medium and large-duty trucks and medium and large-sized specialized operation vehicles, while B1 permits urban buses with a capacity of 10 to 19 passengers.
Was this review help?
4
1
Share
More Forum Discussions

Can You Use Windshield Wipers in Snow?

It is advisable to avoid using windshield wipers during snowy conditions. Instead, lift the wiper blades to prevent them from freezing to the windshield. Placing a layer of newspaper or a specialized snow cover on the front windshield is recommended for easier snow removal. Here are some tips for using wipers in snowy weather: 1. Do not immediately use the wipers or attempt to manually force them. When the car is covered in snow and the windshield has significant accumulation, avoid using the wipers right away to remove snow, as this can tear the rubber surface of the wiper blades, rendering them ineffective or even damaging them. 2. The correct approach is to start the car, turn on the heater to blow warm air onto the front windshield, and then use a brush or dry towel to remove the snow. If there is ice, you can use an ice scraper or plastic scraper to clear the residue.
16
3
Share

What is the Function of the Steering Linkage?

The function of the steering linkage is to transmit the force and motion output from the steering gear to the steering knuckles on both sides of the steering axle, causing the steering wheels to pivot. It ensures that the turning angles of the two wheels change in a specific relationship, minimizing relative sliding between the wheels and the ground during vehicle steering. The steering linkage primarily consists of the pitman arm, drag link, steering knuckle arm, left and right tie rod arms, and the tie rod. The drag link is made of a steel tube with enlarged ends. The ball joints at both ends comprise a ball stud, ball socket, spring seat, spring, and plug, connecting to the pitman arm and steering knuckle arm, respectively. The tie rod connects the left and right tie rod arms and consists of the tie rod body and threaded ends. Each end contains a ball stud, ball socket, and spring, among other components. The ends are threaded into the tie rod body with opposite threads—one right-handed and the other left-handed. By loosening the clamp bolt and rotating the tie rod body, the overall length of the tie rod can be adjusted to set the toe-in.
20
0
Share

Does Canceling a Subject 3 Appointment Affect the Next Reservation?

Canceling a Subject 3 appointment does not affect the next reservation. Generally, canceled driving test appointments are not counted. Successfully canceling a scheduled appointment does not impact future reservations. Canceling an appointment is equivalent to not taking the test and will not be counted toward the five-attempt limit. Each subject allows only three cancellations. If the cancellation is not due to failing the test, you can immediately reschedule. If you have only successfully submitted a reservation request, you can cancel it directly online. If the appointment has been successfully scheduled and you have received an SMS notification, the student must bring their ID card to the vehicle management office to complete the cancellation procedure. Note that this must be done before the day before the exam. Late cancellations or failure to complete the cancellation process will be treated as absenteeism. The vehicle management office uses an online exam reservation system to process exam reservation procedures for applicants who have completed registration according to regulations. The specific process and details are as follows: Based on the exam schedule, the system accepts exam reservation applications from applicants and stops accepting them five days before the exam. If the exam schedule is not fully booked, the acceptance period can be extended until three days before the exam. The system automatically sorts reservation applicants based on the following rules: For first-time Subject 3 exam reservations, sorting is based on the driver's license application acceptance time. For non-first-time Subject 3 reservations or reservations for other subjects, sorting is based on the date of the last exam taken. For applicants who successfully reserved an exam but canceled or missed it due to personal reasons, sorting is based on the cancellation or absenteeism time. If both rules 2 and 3 apply, sorting is based on the most recent time. Based on the exam schedule and applicant sorting, the system determines the exam reservation results, notifies applicants via SMS, and publishes the results online for applicants to check and download/print reservation vouchers. For exam reservation cancellation requests submitted on or before the deadline, the cancellation is processed directly (only once). For requests submitted after the deadline, the applicant must visit the city vehicle management office's service hall to cancel the exam in person.
14
3
Share

What Causes the Battery Light on the Car Dashboard to Illuminate?

Here are the reasons that cause the battery light on the car dashboard to illuminate: 1. Battery failure, such as depleted power or a dead battery. Solution: Use a multimeter to test the battery voltage. If the voltage is low, recharge it; if the battery is dead, replace it. 2. Loose or oxidized battery terminals, leading to poor contact, which can also trigger the battery light. Solution: Clean and tighten the battery connections. 3. A loose alternator belt or tensioner causing the charging system to malfunction and the battery light to illuminate. Solution: Replace the belt or adjust the tensioner. 4. Faulty alternator voltage regulator or excitation circuit malfunction leading to abnormal operation and the battery light turning on. Solution: Troubleshoot the alternator.
9
1
Share

When is the best time to add antifreeze?

Antifreeze should be added when the level is below the standard mark, filling up to the "MAXT" line on the reservoir. Antifreeze is a coolant containing special additives, primarily used in liquid-cooled engine cooling systems. It offers excellent performance in preventing freezing in winter, boiling in summer, and protecting against scale and corrosion year-round. Method for replacing antifreeze: Before completely replacing the antifreeze, conduct a thorough inspection to check for any leaks or cracks in the pipes, with a focus on the five-way hose. The five-way hose is named for its five connections to different parts of the engine. Antifreeze flows through the five-way hose and is distributed to various parts of the car to function. If there is any leakage of antifreeze in this section, replace the hose or reseal the connections as needed. Drain the old antifreeze, then flush the channels with clean water. Add clean water to the antifreeze reservoir and continue filling until water flows continuously through the engine cooling system. Then, start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water coming out of the reservoir will be slightly pinkish. Continue adding clean water until the outflow is clear. Remember to disconnect the heater hose and drain the water from the heater. About an hour after draining, add the new antifreeze through the radiator hose to allow it to flow quickly into the radiator. Then, add another container of antifreeze to the reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. During this time, the coolant level will drop as air is purged from the system. Top up the antifreeze again, filling up to the "MAXT" line on the reservoir.
5
5
Share

What are the differences between the Mercedes-Benz C180L and the Mercedes-Benz C260L?

The differences between the Mercedes-Benz C180L and C260L are as follows: 1. Power: The Mercedes-Benz C180L is equipped with a 1.6T turbocharged engine with a maximum horsepower of 156Ps, while the C260L is equipped with an overseas version of the 1.5T engine + 48V mild hybrid system, with a maximum output power of 184 horsepower and a peak torque of 280N·m. 2. Interior configuration: The Mercedes-Benz C260L is equipped with a panoramic sunroof, while the C180L has a single sunroof. Additionally, the C260L also features wireless phone charging, which the C180L lacks. Other minor details such as seat heating, welcome pedal lights, mirrors, etc., also have certain differences. 3. Driving experience: With the mild hybrid system, the C260L starts surprisingly smoothly, almost imperceptibly to the intervention of the engine start-stop system. From the test drive experience, it can be understood that during acceleration bursts, the power comes directly, as smooth as a large-displacement naturally aspirated engine, without any lag in response.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.