How many seats can a B1 driver's license drive for a medium-sized passenger vehicle?

1 Answers
VonMary
07/25/25 9:11pm
A B1 driver's license can drive medium-sized passenger vehicles with 8 to 19 seats. The types of vehicles that different driver's licenses can drive are: Vehicles that an A1 driver's license can drive: Large passenger vehicles, i.e., vehicles longer than 6 meters or with a rated passenger capacity of 20 or more; A1, A3 city buses, B1 medium-sized passenger vehicles, B2 large trucks, C1 small cars, C2 small automatic transmission cars, C3 low-speed trucks, C4 three-wheeled cars, M wheeled self-propelled machinery. Requirements for obtaining an A1 driver's license: 1. Age conditions, applicants for large passenger vehicle driving must be between 26 and 50 years old; 2. Height must be at least 155 cm, and vision requirements are that both eyes must have naked or corrected vision reaching at least 5.0 on the logarithmic visual acuity chart.
Was this review help?
8
5
Share
More Forum Discussions

What is the correct way to start a Volkswagen Lavida?

Correct starting procedure for Volkswagen Lavida: 1. Insert the key and rotate clockwise to the first position to activate the instrument panel power, fuel pump operation, and onboard computer check; 2. Depress the brake pedal and shift the gear lever from P to N; 3. Continue rotating the ignition key clockwise to start the engine; 4. Wait several seconds until the engine idle speed drops to around 800 rpm before engaging gear to move off. The Lavida is Shanghai Volkswagen's first independently developed A-segment vehicle. Its front fascia design differs significantly from previous Volkswagen A-class models, particularly featuring distinctive teardrop-shaped headlights. The Lavida inherits and enhances Volkswagen's signature grille and U-shaped front design, while its uniquely styled bumper with strong, harmonious curves also serves as a highlight of the car's front appearance.
13
3
Share

How to Reset the Tire Pressure Warning Light on a Golf?

Golf tire pressure warning light reset method: The button is located on the gear lever panel. Press and hold the SET button on the gear lever for 3 to 5 seconds until you hear a ding sound, indicating the tire pressure reset is complete. When the tire pressure warning light illuminates, it indicates that one or more tires have low or high pressure. When the vehicle's tire pressure monitoring system detects an abnormality, a warning message will appear on the display screen, and the tire pressure warning light will turn on. The Volkswagen Golf is a classic hatchback and compact family car introduced by Volkswagen, featuring European design style and Volkswagen's new design language, with a more dynamic and fashionable appearance that is clear, concise, and powerful. The perfect body proportions, harmonious and elegant body lines, combined with agile front headlights and a simple rear design, not only give the Golf more personality and three-dimensional appeal but also ensure ample interior space, making it more comfortable and practical.
12
2
Share

Reasons for Water Leakage from Car Exhaust Pipes

Reasons for water leakage from car exhaust pipes: After gasoline burns, it forms water and carbon dioxide. When the ambient temperature is high, it appears as water vapor, which is expelled before condensation occurs. When the ambient temperature is low, the water vapor condenses into water droplets on the exhaust pipe walls, which then leak out through the exhaust pipe. Minor water leakage from the exhaust pipe is a normal phenomenon. However, if the leakage significantly exceeds normal levels, it could indicate that coolant from the engine is entering the combustion chamber, leading to excessive water leakage. In such cases, it is advisable to promptly visit a 4S shop or a professional auto repair shop for inspection and repair. Excessive water in the exhaust pipe can cause inaccurate fuel supply to the engine, affecting vehicle performance. Prolonged accumulation of water droplets in the exhaust pipe can also accelerate pipe corrosion.
11
4
Share

Where is the Nissan X-Trail ignition coil capacitor located?

The Nissan X-Trail ignition coil capacitor is installed inside the ignition coil. Steps for ignition coil removal and installation: 1. Open the ignition coil cover on top of the engine; 2. Use a pentagon socket wrench to remove the ignition coil fixing screws; 3. Disconnect the ignition coil power plug; 4. Gently pry it up with a screwdriver and remove the ignition coil; 5. Install the new ignition coil and tighten the screws; 6. After connecting the power plug, replace the top cover plate. The X-Trail is equipped with an intelligent all-mode four-wheel drive system, through which the driver can freely choose between two-wheel drive, automatic or locked four-wheel drive modes to cope with various road conditions. The two-wheel drive mode can effectively maintain low fuel consumption during daily driving. In automatic mode, the system intelligently distributes torque between the front and rear wheels from 100:0 to 50:50 according to road conditions, delivering optimal driving performance on various surfaces.
16
0
Share

How to Fix Idle Instability in Malibu?

Malibu idle instability repair methods: 1. When the engine idle is unstable, adjust the idle speed; 2. Check whether the idle jet and idle air jet are clogged. If the jets are clogged, clean them with gasoline or acetone and blow them through with compressed air; 3. Stabilize the engine speed at a certain RPM and listen for air leaks at the intake manifold or the middle and lower gaskets of the carburetor. If air leaks are detected, tighten the screws or adjust the gasket thickness to resolve the issue; 4. If idle instability is accompanied by a drop in engine power, further inspect the spark plugs, valve sealing performance, and ignition timing. Perform necessary repairs or adjustments if needed. Symptoms of idle instability include engine shaking and uneven RPM during idle operation.
20
0
Share

Is It Necessary to Install Car Rain Guards?

Car rain guards are necessary to install, especially in rainy areas. Rain guards are car accessories, which are protruding rain visors made of synthetic resin or engineering plastic material along the top edge of car windows. They can effectively prevent rainwater or strong wind from directly blowing into the car, improve ventilation efficiency, and prevent window fogging when driving with windows open in the rain. The main functions of car rain guards are: 1. In rainy conditions, they maintain fresh air circulation, ensuring a comfortable environment inside the car for passengers; 2. By maintaining fresh air circulation, they prevent window fogging under any circumstances, which enhances driving safety by ensuring clear visibility and operation; 3. They block glaring side light and UV rays, reduce interior temperature, and prevent rain, snow, and sand from entering the car without affecting external air exchange.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.