···
Log in / Register

How many reverse lights does the Vios have?

3 Answers
Gabriela
07/29/25 12:13am
The Vios has only one reverse light. Rear light design for left-hand drive vehicles: According to Chinese national standards, the left side features a fog light (red) to alert vehicles that may overtake from behind, while the right side has a reverse light to facilitate nighttime parking on the right side. Rear light design for right-hand drive vehicles: The fog light (red) is on the right to alert vehicles that may overtake from behind, and the reverse light is also on the right. Design rationale for reverse lights: Reverse lights are white and highly bright to illuminate the rear of the vehicle. If two symmetrical reverse lights were used, they could easily make drivers behind mistake the car for facing forward, reducing their alertness. Using only one reverse light avoids this misunderstanding and leaves the other side's tail light visible. This way, drivers behind can recognize the car is reversing by seeing one red and one white light.
Was this review help?
15
5
Share
DeLevi
08/12/25 3:25am
I've been driving the Vios for several years and noticed that it typically has two reverse lights, located at the lower left and lower right corners of the rear bumper. These provide clear illumination when reversing at night, helping to avoid collisions with obstacles or pedestrians. As a frequent driver, I find the dual-light design more practical than a single light because it offers a wider coverage area, especially in tight spaces or dark environments, reducing blind spots. However, if the reverse lights aren't working, it's usually due to a burnt-out bulb or wiring issues. In such cases, I check the fuse or simply replace the bulb. Modern cars like the Vios mostly adopt this standard configuration, which is both safe and reliable. If you encounter similar issues, it's best to visit a professional repair shop promptly. Remember, regularly checking the lighting system can significantly improve driving safety—don’t underestimate the practical value of these small details.
Was this review help?
2
5
Share
Expand All
DelSpencer
10/01/25 7:05am
From a technical perspective, the reversing light system of the Vios is well-designed, typically featuring two LED bulbs installed symmetrically at the rear. I've studied this type of lighting, and the use of dual lights instead of a single one aims to enhance brightness and uniformity, providing drivers with a more comprehensive view while reversing. For example, the Vios's lighting circuit is connected to the transmission sensor, automatically illuminating when the reverse gear is engaged. If the lights fail to turn on, it's likely due to a sensor malfunction or a blown fuse. Although LED lights are durable, their lifespan is limited, so I recommend checking them every two years. Additionally, the reversing lights are linked to auxiliary systems like safety cameras, and proper maintenance can prevent potential risks. In automotive design, this dual-light layout is a mainstream choice—both economical and efficient—making it worthwhile to pay attention to such details in daily use.
Was this review help?
2
5
Share
Expand All
More Forum Discussions

What are the differences between driving a front-wheel drive and a rear-wheel drive car?

There are specific differences between driving a front-wheel drive (FWD) and a rear-wheel drive (RWD) car as follows: 1. FWD cars are fuel-efficient and economical, but they tend to understeer and are not suitable for aggressive maneuvers. In daily driving, FWD cars are more comfortable and stable. 2. RWD cars offer better handling flexibility and higher torque. Due to their drivetrain layout and cost considerations, RWD cars generally have a more balanced weight distribution compared to FWD cars, resulting in stronger power output. The advantages of FWD and RWD are as follows: 1. FWD: Good handling, better acceleration performance, and easier maintenance. 2. RWD: Lower manufacturing cost, higher efficiency, reduced weight, and increased interior space.
12
5
Share

Are New Energy Vehicles Mandatorily Scrapped After 8 Years?

For new energy vehicles, the scrapping standards are entirely based on the existing standards for fuel-powered vehicles, with no separate scrapping criteria. As long as the vehicle passes the annual inspection, there is no issue, and it can continue to be used. Otherwise, it must be scrapped. More relevant information is as follows: 1. Passenger Cars: Under the new regulations for passenger car scrapping, the existing standard for private cars is a mileage of approximately 600,000 kilometers. When this mileage is reached, the state guides the vehicle to be scrapped. 2. Whole Vehicle: In terms of whole vehicle scrapping, new energy vehicles follow the same standard as fuel-powered vehicles, being scrapped at around 600,000 kilometers. 3. Battery: According to the battery recycling management measures, batteries are considered scrapped after about 5 to 8 years.
16
2
Share

What causes the noise from car window glass while driving?

Solutions for noise from car window glass while driving: 1. Loose door screws or lifting bracket, simply tighten the loose door glass. When driving on bumpy roads, the car window glass may make noise, which is usually caused by loose fastening screws inside the window glass or the lifting bracket. 2. Aging window glass sealing strip, replace it directly. Aging door glass sealing strips are often one of the reasons for window noise. If it's a new car making noise, simply purchase lubricant and apply it evenly on the sealing strip. 3. Debris in the window glass guide rail, the solution is to use tools to clean the debris in the guide rail. The gap in the sealing strip of the car slot can easily bring in dust and particles during the glass lifting process, which may cause vibration and noise from the window glass. If dust and particles accumulate more and more, it may damage the lifting motor.
4
5
Share

What does PVM panoramic monitoring system mean?

PVM panoramic monitoring is similar to a vehicle's all-around view system, which allows the driver to view the car's position from a top-down perspective. It helps the driver see a wider field of vision when driving at low speeds. The following precautions should be noted when using panoramic monitoring: 1. Do not rely entirely on the panoramic view monitoring system; always drive with caution. 2. Before using the panoramic view monitoring system, visually inspect the surroundings of the vehicle to form a general judgment. 3. When using the panoramic view monitoring system, do not just look at the screen; use the vehicle's rearview mirrors to observe the surroundings. 4. Avoid using the system under adverse conditions such as slopes, curves, or during rain or snow. 5. Changes in tire size may affect the accuracy of the panoramic monitoring guide lines.
2
1
Share

What does the red key symbol on the dashboard indicate?

When a red key symbol appears on the car dashboard, the possible reasons are as follows: 1. The smart key battery is dead, and the car cannot detect the smart key. 2. The smart key is not inside the vehicle or is too far from the sensing point to be detected. 3. There is interference in the surrounding environment, such as near high-voltage power lines, transformers, or mobile communication signal towers. The functions of the car smart key are as follows: 1. When the key approaches the car body, the doors automatically unlock, and the anti-theft alarm is deactivated, with the turn signals flashing twice. 2. When the key moves away from the car body, the doors automatically lock, and the anti-theft alarm is activated, with the turn signals flashing once and the horn sounding briefly. 3. The effective detection range for the main door is at least 1.5 meters, while other doors are effective when the key is near them.
10
4
Share

How to Choose a Car Windshield?

Car windshield selection is as follows: 1. Choose a reputable manufacturer: Car glass on the market is divided into original factory glass and aftermarket glass. The quality of aftermarket glass is not guaranteed. When purchasing, consumers should first choose a formal channel and a reputable manufacturer with 3C certification. Cheap and inferior glass can endanger driving safety. 2. Check the trademark: The logo on a qualified product is difficult to scrape off with a blade, while counterfeit products can be easily scraped off. Qualified glass has smooth edges when broken, whereas inferior glass is very sharp. Qualified car glass has a smooth surface without unevenness, and the logo on qualified car glass is hard to scrape off. 3. Examine the glass fragments: High-quality glass fragments placed on the ground cannot be crushed by stepping on them, while inferior glass can be easily crushed by stepping on it, causing significant harm to individuals. Unqualified car glass is more likely to be fatal upon impact.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.