···
Log in / Register

How Many Questions Can You Get Wrong in Subject 4?

6Answers
MacPeter
07/29/2025, 02:54:33 PM

According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," the passing score for the Subject 4 road driving skills and safe civilized driving knowledge test is 90 points. Each incorrect answer deducts 2 points, meaning you can only get 5 questions wrong; any more will result in failure. The maximum score is 100. Questions 1-10 are true/false; 11-40 are single-choice; and 41-50 are multiple-choice. The test includes image analysis, animated case studies, and text-based questions. The scope of Subject 4 covers driving knowledge under adverse weather and complex road conditions; identification of common traffic signs, markings, and hand signals; accident rescue and hazardous material handling; comprehensive judgment of violations and case analysis; emergency avoidance knowledge; safe driving principles; and driving ethics and civilized driving knowledge. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," there is no limit to the number of attempts for Subjects 1 and 4. If you fail the first attempt on the same day, you can retake it immediately. If you fail again, you need to reschedule, but no additional fees are required for retakes. Note that the driving skills test permit is valid for three years. If the applicant fails to complete the test within this period, previously passed subjects will be invalidated. Subject 4, also known as the theoretical driving test or driver's theory test, is part of the motor vehicle driving license assessment. After the implementation of the Ministry of Public Security's Order No. 123, Subject 3 was divided into two parts: the road test and the safe civilized driving knowledge test, commonly referred to as "Subject 4," which evaluates "driving ethics." Subject 4 is the colloquial term for the safe civilized driving knowledge test under Subject 3, not a separate subject. Since this test follows Subject 3, it is commonly called Subject 4. Officially, there is no Subject 4. The safe civilized driving knowledge test is conducted after Subject 3. Subject 4 Exam Guidelines: Exam Duration: 45 minutes. Number of Questions: 50 questions are randomly selected from the Subject 4 question bank based on the type of license being tested. Question Types: Single-choice (including true/false) and multiple-choice questions, with formats such as animations, images, scenario recognition, and text-based questions. The driving test consists of three subjects: Subject 1, Subject 2, and Subject 3, with Subject 3 further divided into two parts. Subject 1 covers traffic laws, regulations, and related knowledge; Subject 2 focuses on field driving skills; and Subject 3 includes road driving skills and safe civilized driving knowledge. Subject 4 refers specifically to the safe civilized driving knowledge component.

Was this review help?
116
Share
HaleyLee
08/14/2025, 08:40:26 AM

I remember when I was taking the Subject 4 test a few years ago, I kept asking myself how many questions I could afford to get wrong. The Subject 4 test consists of 50 questions, with a perfect score of 50 points, and you need at least 90% to pass, which means you can only miss up to 5 questions. Although the number seems small, the exam covers essential safe driving knowledge, such as handling emergency situations on the road and understanding traffic rules—one careless mistake and you lose points. I was under a lot of pressure back then, so I practiced like crazy on a test prep app, doing mock exams every day, and ended up scoring 94. My advice for your preparation is to focus more on real-life scenario questions, like how to avoid a pedestrian suddenly crossing the street—this helps improve your reflexes. Passing this test isn’t just about getting your license; it’s about ensuring your safety and others’ on the road.

Was this review help?
15
Share
Expand All
OJames
10/14/2025, 10:05:13 PM

Haha, when it comes to Subject 4, the most frequent topic among my friends and I during preparation was the maximum number of mistakes allowed. There are 50 questions in total, and you need to answer 45 correctly to pass, which means you can only get 5 wrong. The exam was quite nerve-wracking—I barely slept the night before, worrying about messing up the hand signal questions. My advice is to stay calm and not overthink the mistake limit. A cup of coffee before the test helps to stay alert. The questions cover topics like blind spot avoidance or emergency procedures, so practice more with driving simulation apps. Remember, the 5-mistake limit reminds us to be meticulous when driving.

Was this review help?
15
Share
Expand All
SanCody
11/27/2025, 09:56:59 PM

In the Subject 4 exam, failing more than 5 questions results in disqualification. The test consists of 50 questions, requiring 45 correct answers to achieve a score of 90. The questions cover right-of-way judgment and safety signs. For preparation, it is recommended to use the official APP for practice questions to familiarize yourself with the question types.

Was this review help?
16
Share
Expand All
JuniperLee
01/17/2026, 11:20:55 PM

I was extremely nervous before taking the Subject 4 test, constantly worrying about how many mistakes I could make. The rule is no more than 5 errors out of 50 questions, or you fail directly. Mindset is crucial—don't put too much pressure on yourself. Most questions are about daily driving scenarios, like how to handle an accident. I messed up on the fatigue driving question but later understood it emphasizes safety first. During review, watch more video explanations of the questions.

Was this review help?
20
Share
Expand All
LeMatteo
04/14/2026, 01:01:13 AM

Looking back at the subject four exam, the most frequently discussed topic was the error tolerance—only 5 mistakes were allowed, otherwise a retake was required. The test consisted of 50 questions, with the goal of answering 45 correctly. This system was designed to cultivate safe driving habits, such as the proper use of emergency lanes or rules for nighttime encounters. After passing, I became more attentive to road signs while driving. I recommend combining real-life experiences to better understand the questions.

Was this review help?
20
Share
Expand All
More Q&A

What is the wading depth of BMW vehicles?

BMW's sedan models have a maximum wading depth of 250mm; SUV models (X3, X4, X5, X7) have a maximum wading depth of 500mm; the X6 SUV model has a maximum wading depth of 450mm; other SUV models have a maximum wading depth of 300mm. The wading depth of BMW vehicles is determined by the height of the vehicle chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when passing through waterlogged roads. Therefore, in terms of safe wading depth, off-road vehicles and SUVs have obvious advantages. However, for most compact and small vehicles with low chassis, the position of the vehicle's air intake should be used as a reference when passing through waterlogged roads. If the air intake is below the water level when wading, water will be sucked into the engine cylinders. Since water cannot be compressed like air, it can cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth should not exceed the height of the engine air intake. The height of the engine air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before wading, always turn off the auto start-stop function to prevent the engine from automatically restarting after stalling in water, which could cause severe damage if water enters the engine. Assess the underwater road conditions based on the passage of preceding vehicles and choose an appropriate entry point. Observe the path taken by other vehicles and follow their tracks at low speed, avoiding sudden acceleration or deceleration. For roads prone to water accumulation, observe warning water level markers, trees, or reference points such as the wheels and doors of other vehicles to estimate the water depth before deciding whether to proceed. Know your vehicle's safe wading depth. If the water depth exceeds half the tire height or the engine air intake, do not proceed recklessly; consider alternative routes.
103
Share

How to Remove Bubbles from Car Window Tint?

Methods to remove bubbles from car window tint: If there are numerous large bubbles that are difficult to smooth out, it is recommended to replace the tint film entirely, as it not only affects aesthetics but also compromises driving safety. For fewer but larger bubbles, you can make a small incision and use a squeegee and heat gun to gradually flatten them. For small and few bubbles, simply puncture them with a needle and press them flat. Small bubbles appearing within a week after tint application are normal. Visit the installation shop for maintenance within two to three days after application and leave the car in direct sunlight for an afternoon—these bubbles can usually be completely eliminated.
102
Share

How to Measure Brake Pad Thickness?

Methods for measuring brake pad thickness: Visual inspection is possible. For some cars, you can check the brake pad thickness through the gaps in the wheel hub. Tilt your line of sight at a 15-degree angle to the plane of the wheel hub and look at the gap between the brake pad and the brake disc to observe the thickness. If the brake pad has worn down to one-third of the standard thickness, it is recommended to replace it promptly. Brake pad thickness can also be measured using professional measuring tools, which come with various thickness measurements and can provide thickness recommendations. Alternatively, you can judge by feel—if the brake pedal feels lighter than usual or braking becomes difficult or ineffective, it may indicate insufficient brake pad thickness, leading to inadequate friction. In such cases, immediate replacement is necessary to prevent accidents.
109
Share

How to Set Up Automatic Door Locking for Civic?

To set up automatic door locking for the Civic: The doors will automatically lock when you shift to D gear and press the accelerator. The automatic door locking feature, also known as speed-sensing auto-lock, is an electronic device that automatically engages the door lock button when the vehicle reaches a preset speed, preventing accidental door opening. The benefits of automatic locking include theft prevention, as the doors lock shortly after driving starts, reducing the risk of door-pulling robberies during traffic jams or at red lights. The Civic, launched by Dongfeng Honda, features a stylish and elegant design with smooth body lines. The side profile is bolder than the front, with a gently sloping C-pillar resembling a coupe. It adopts 'bracket-style' LED taillights with a dart-shaped design.
119
Share

How to Read the Circuit Diagram in a Car?

Methods for reading the circuit diagram in a car: 1. Locate the power supply and ground: The circuit diagram shows two power supplies on the central control module, differing only in type, with only one ground connection on the module; 2. Alarm: The diagram features a horn-shaped alarm that sounds when the owner remotely locks or unlocks the doors. This is the central control horn, distinct from the anti-theft alarm horn, and does not trigger due to vehicle vibrations; 3. Door-open signal: This signal primarily monitors whether any doors are not properly closed. If a door is left open, the horn alerts the owner during locking, and the vehicle cannot be locked normally; 4. Vehicle speed signal: The diagram also includes a vehicle speed signal originating from the speed sensor. When the module detects a speed exceeding 10 km/h, it automatically locks the doors.
106
Share

Is the Golf Sportsvan an imported car?

The Golf Sportsvan is not an imported car; it is a joint-venture vehicle under the Volkswagen brand and is domestically produced. The Golf Sportsvan offers spacious interiors and excellent practicality, with dimensions of 4351mm in length, 1807mm in width, and 1574mm in height, and a wheelbase of 2685mm. The Golf Sportsvan is equipped with two engines: one is a 1.2-liter turbocharged engine, and the other is a 1.4-liter turbocharged engine. The 1.2-liter turbocharged engine delivers a maximum power of 85kW and a maximum torque of 200Nm, with the maximum torque available between 2000 to 3500 rpm and the maximum power output between 5000 to 6000 rpm.
113
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.