How many points will be deducted for parking on the emergency lane of the highway?

1 Answers
AubreeFitz
07/30/25 9:08am
Parking on the emergency lane of the highway will result in a deduction of 6 points and a fine. Below are some precautions for driving on the highway: 1. Before entering the highway: Before driving on the highway, it is essential to conduct a thorough inspection of the vehicle. First, check the fuel level. 2. Check the tire pressure: While driving, tires undergo compression and expansion, known as tire deformation. This phenomenon is more pronounced when the tire pressure is low and the speed is high, leading to abnormally high internal temperatures. This can cause the rubber layer to separate from the cover layer or result in the rubber on the outer tread breaking and flying off, leading to a tire blowout and potential accidents. Therefore, before driving at high speeds, the tire pressure should be slightly higher than usual. 3. Check the braking performance: The braking performance of a vehicle is crucial for driving safety. When driving on the highway, extra attention should be paid to braking performance. Before setting off, drive at a low speed to test the brakes. If any abnormalities are detected, repairs must be carried out immediately; otherwise, it could lead to a serious accident.
Was this review help?
17
2
Share
More Forum Discussions

How to Pay the Fine for Not Wearing a Seat Belt?

Payment of fines for traffic violations: 1. Bring the vehicle's license, driver's license, and ID card to the traffic police station's violation processing window. 2. Take the violation notice issued by the traffic police to the designated bank to pay the fine, which must be paid using a bank card under the owner's name. 3. You can also pay online by entering the violation notice number on the bank's website under public service payments—traffic violation fines. Here is some relevant information: 1. Urban expressways: When driving on urban expressways, if the driver does not wear a seat belt as required, a fine will be imposed and 2 points will be deducted. 2. Highways: When driving on roads other than highways or urban expressways, if the driver does not wear a seat belt as required, a fine will be imposed without point deduction.
11
4
Share

Is the car film applied on the outside or inside of the glass?

Generally, the film applied to cars is placed on the inner side of the car glass, except for films used in modifications or color changes. Applying the film on the inside prevents exposure to wind and rain, slowing down the aging process and avoiding significant external interference during use, which could otherwise lead to shorter lifespan, poor adhesion causing peeling or lifting edges. Below are the benefits of car window tinting: 1. Extends lifespan: Blocks medium and long-wave UV rays that can penetrate thick glass. A car with window film can block most UV rays from entering the interior, reducing aging of car interiors and extending their lifespan; 2. Glass shatterproofing: Another benefit is its shatterproof effect. When applied to the inner side of the glass, in case of an accident where the glass shatters, the film can hold the broken pieces together, preventing glass fragments from scattering and injuring passengers; 3. Creates a private space: Some types of films allow clear visibility from inside the car while making it difficult or impossible to see inside from the outside, ensuring the privacy and security of the car owner and the interior.
20
1
Share

How to Eliminate Hill Start Assist Function Failure?

Hill start assist failure solution: You can first turn off the hill start assist, turn it off for a few minutes and then restart it. If the fault still shows, it is recommended to go to a 4S store for maintenance and inspection, as this situation is not normal. More relevant information is as follows: 1. Hill start assist failure may be caused by sensor failure: The car's hill start assist system is usually integrated into the vehicle stability system (ESP). If the ESP on the car remains on, the hill start assist function is also kept on by default. 2. Hill start assist: It refers to the phenomenon that when the vehicle starts on a steep or slippery slope, the driver switches from the brake pedal to the accelerator pedal, causing the vehicle to slide slightly backward, making it difficult to start. In this regard, the hill start assist control temporarily (up to 2 seconds) applies braking to all four wheels to prevent the vehicle from sliding. In some vehicles, the hill start assist system will automatically activate when the operator further depresses the brake pedal.
12
2
Share

What Causes the Car to Jerk When Downshifting?

Jerking during downshifting is primarily due to improper speed control. Here are the correct methods for downshifting a car: 1. Coordination between throttle and clutch: Two fast, two slow, and one pause—quickly release during the free play and empty travel phases of the clutch, slowly release during the initial engagement and just entering full engagement phases, and pause during semi-engagement. 2. Specific gearshift speeds for particular models: Shift according to the speed recommended in the manual. 3. Avoid skipping gears when upshifting: During rapid downshifting for overtaking, if there's no time to upshift promptly, you can skip gears after overtaking based on the current speed. When road and vehicle conditions are good, you may also upshift as needed during overtaking.
4
2
Share

What causes oil leakage after a motorcycle falls over?

There are several situations where oil leakage occurs after a motorcycle falls over: carburetor leakage and fuel spilling from the fuel tank. Methods to handle motorcycle oil leakage: First, clean the motorcycle's engine, then use aluminum repair agent to patch the leaking area. If this does not resolve the issue, it should be promptly sent to a repair workshop for maintenance. Reasons for carburetor leakage: In a motorcycle carburetor, the float chamber normally maintains a constant liquid level. If the vehicle falls, the liquid level will rise, causing fuel to flow out through the carburetor's return pipe. Carburetor motorcycles rely on gravity for fuel supply. The float in the float chamber is connected to a switch that controls the amount of gasoline entering the carburetor. If the switch fails, gasoline will continuously enter the carburetor under gravity, flowing into the engine intake and air filter. Therefore, an overflow pipe is designed to discharge excess gasoline through the pipe below the carburetor when the float switch fails to close. Fuel spilling from the fuel tank: This phenomenon usually occurs on motorcycles that have had their fuel tank cap replaced. If it is the original cap, only a small amount will leak out because the fuel tank cap has an exhaust hole.
7
5
Share

What is the correct way to use engine braking?

The correct method for using engine braking is to ensure the engine brake is turned off before starting the vehicle. Below are relevant details about engine braking: 1. Concept: Engine braking utilizes the compression resistance generated during the engine's compression stroke, where internal friction and intake/exhaust resistance create a braking effect on the drive wheels. 2. Principle: Engine braking refers to the momentary opening of the exhaust valve near the top dead center position during the compression stroke when the accelerator is released, releasing high-pressure gas. After closing the exhaust valve, very little gas remains in the cylinder. This creates a negative pressure state in the cylinder during the explosion (expansion) stage when the piston moves downward from the top dead center.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.