How Many Points Will Be Deducted for Novice Drivers on the Highway?

2 Answers
DiChloe
07/30/25 1:35am
Novice drivers will not have points deducted for driving on the highway, but they will be fined and ordered to exit the highway at the nearest opportunity. Below are the precautions for novice drivers driving on the highway during their probationary period: Prohibition of Driving Alone on the Highway: During the probationary period, if a driver operates a motor vehicle on the highway, they must be accompanied by a driver who has held a driver's license for the corresponding or higher vehicle class for more than three years. The accompanying driver should sit in the front passenger seat to guide the probationary driver. Precautions for Driving on the Highway: Before driving, conduct thorough checks, especially on fluids, tires, lights, and other items. Plan your route in advance. Pay attention to road signs, and if you miss a highway exit, do not panic. Avoid attempting to brake suddenly or make a U-turn. Instead, maintain your speed and continue driving to the next exit to return to your original route.
Was this review help?
13
4
Share
MacMackenzie
08/15/25 7:20am
I've been driving on highways for many years and know that new drivers in their probation period can't drive alone on highways. If caught, they face a fine of 200 yuan and 2 penalty points. However, inexperienced drivers on highways are prone to other mistakes, such as speeding over 20%, which directly results in 6 penalty points, or driving too slowly in the fast lane, which incurs 3 penalty points. My personal advice is that new drivers shouldn't rush onto highways. Instead, they should first practice a few times with an experienced driver who has over three years of driving experience to learn how to maintain safe distances and control speed. The probation period only allows a total of 12 penalty points; exceeding this leads to license cancellation and the need to retake the test, which is both troublesome and dangerous. Highways have fast speeds and complex road conditions, and new drivers' slower reactions can easily lead to accidents. It's better to hone driving skills on city roads before attempting highways. Remember, safety comes first—don't take risks for convenience.
Was this review help?
10
3
Share
Expand All
More Forum Discussions

What Causes a Sedan to Lack Power and Fail to Accelerate When Climbing a Slope?

The reasons why a sedan lacks power and fails to accelerate when climbing a slope are: 1. Excessive carbon buildup in the vehicle; 2. Poor fuel quality; 3. Blocked intake or exhaust system; 4. Worn-out spark plugs; 5. Cylinder misfire; 6. Insufficient tire pressure; 7. Insufficient engine power; 8. Problems with the combustion chamber, ignition system, or valves; 9. Dirty fuel filter, damaged fuel pump, or clogged catalytic converter. Solutions to address a sedan's lack of power and failure to accelerate when climbing a slope include: 1. Cleaning carbon deposits; 2. Using high-quality gasoline; 3. Replacing spark plugs; 4. Regularly checking tire pressure; 5. Periodically cleaning the fuel filter; 6. Inspecting the fuel pump.
6
2
Share

Will the Prado meet China VI emission standards?

The Prado will not meet China VI emission standards due to the total emission restrictions under China VI, which are not suitable for large-displacement SUVs. Taking the 2010 Prado as an example, its body dimensions are: length 4820mm, width 1885mm, height 1845mm, wheelbase 2790mm, minimum ground clearance 220mm, and fuel tank capacity 87L. The 2010 Prado is equipped with a 2.7L naturally aspirated engine, with a maximum horsepower of 163ps and a maximum power of 120kw, paired with a 5-speed manual transmission. It uses a double-wishbone independent front suspension and a four-link solid axle non-independent rear suspension.
2
5
Share

How to Properly Set Up a Dash Cam?

To correctly set up a dash cam: 1. Assemble the dash cam with its mounting bracket; 2. Use the suction cup on the bracket to attach it to the front windshield near the rearview mirror; 3. Connect one end of the power cable (USB port) to the dash cam and the other end to the cigarette lighter; 4. After installation, turn on the dash cam and set the parameters to Simplified Chinese; 5. Configure the time, video resolution, and audio recording. A dash cam is a device that records video and audio information during vehicle operation, capturing the entire driving process to provide evidence in case of traffic accidents.
19
4
Share

What are the reasons for the ABS warning light to come on?

ABS warning light comes on due to a fault in the anti-lock braking system. The possible reasons for the ABS warning light to come on include: 1. Faulty wheel speed sensor; 2. Faulty wheel speed sensor wiring. The methods to reset the ABS warning light are: 1. Visit a repair shop to have it cleared with a computer; 2. Locate the car battery, disconnect the negative terminal, and reconnect it after a few minutes. ABS stands for Anti-lock Braking System, and its functions are: 1. Automatically controlling the braking force during braking to effectively keep the wheels in a rotating state; 2. Improving the stability of the car during braking and the braking performance on poor road conditions.
9
1
Share

What is the function of the 'off' button in a car?

The 'off' button in a car refers to the switch that turns off the vehicle stability control system. The working principle of the vehicle stability control system is as follows: when the vehicle is making a quick turn, dodging, or avoiding a suddenly appearing car or animal, if the vehicle slides outward due to understeer or crosses the centerline of the road or even spins in place due to oversteer, the system uses a computer to control the engine output and apply brakes to any wheel, thereby eliminating understeer or oversteer and improving the dynamic stability of the vehicle. When the car is powered on, the vehicle stability system is enabled by default. Press and hold the 'off' button to turn off the vehicle stability system.
3
4
Share

How to Defog a Toyota Corolla?

Toyota Corolla's defogging steps are: 1. Turn on the car's air conditioning; 2. Adjust the air conditioning to the warm air setting; 3. Turn on the car's external circulation; 4. Press the front and rear defogging buttons, and use warm air to complete the defogging. Taking the Toyota Corolla 2021 model as an example, its body dimensions are: length 4635mm, width 1780mm, height 1455mm, with a wheelbase of 2700mm. The Toyota Corolla 2021 model is equipped with a 1.2T turbocharged engine, with a maximum horsepower of 116ps and a maximum power of 85kw, matched with a continuously variable transmission.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.