How many points will be deducted for not following the rules when meeting oncoming traffic?

1 Answers
MacEden
07/29/25 11:43am
Not following the rules when meeting oncoming traffic will result in a deduction of 1 point and a fine of 200 yuan. Additional information on meeting oncoming traffic: Principles for yielding when meeting oncoming traffic: The principle for yielding when meeting oncoming traffic is that turning vehicles must yield to vehicles going straight, vehicles coming from the right have the right of way, and right-turning vehicles must yield to left-turning vehicles. When facing a sign indicating oncoming traffic, the upward arrow represents your vehicle. If your arrow is large (black or white), it means you have the right of way (you go first); if your arrow is small (red), it means you must yield (others go first). Regulations for meeting oncoming traffic: If there are traffic signs or markings, yield to the party with priority; if there are no traffic signs or markings, stop and look before entering the intersection, and yield to vehicles coming from the right; turning vehicles must yield to vehicles going straight; right-turning vehicles from the opposite direction must yield to left-turning vehicles.
Was this review help?
18
3
Share
More Forum Discussions

How to Replace the Battery in a Golf Car Key?

Here is the method to replace the battery in a Golf car key: 1. Take out the Golf car key. There is a gap on the side of the key near the keyring. Insert a flat-head screwdriver into the gap after unfolding the key. 2. Flip the Volkswagen logo upward and forcefully pull the key upward to open the key cover. Inside, you will see a battery. 3. Use the screwdriver to pry out the battery, being careful with the force. Insert the new battery into the car remote key in the reverse order of removal. Pay attention to the positive and negative poles, and do not install the battery backward. Press the key's back cover back into place.
2
3
Share

Which Mercedes-Benz S-Class is a Maybach?

Mercedes-Benz S400L is a Maybach. Taking the 2021 Mercedes-Benz S400L as an example, it belongs to the full-size luxury sedan category with the following dimensions: length 5290mm, width 1921mm, height 1503mm, wheelbase 3216mm, and fuel tank capacity of 76 liters. The 2021 Mercedes-Benz S400L features a double-wishbone independent front suspension and a multi-link independent rear suspension. It is equipped with a 3.0L twin-turbocharged engine delivering a maximum horsepower of 313PS, maximum power of 230kW, and maximum torque of 450Nm, paired with a 9-speed automatic transmission.
5
5
Share

What Could Be the Reason If the Car Hood Won't Open?

The reasons why a car hood won't open are as follows: 1. The car hood switch is damaged. 2. The hood release cable is detached or broken. 3. Insufficient lubrication of the car hood latch spring. Solutions for a car hood that won't open: 1. If the car hood latch spring lacks lubrication, add lubricating oil. 2. There is an engine hood button under the steering wheel; pulling this button inside the car will loosen the engine hood. Lift the engine hood, reach inside, and pull a mechanical latch to open the hood. 3. Use a screwdriver to hook and open the engine hood. Crawl under the car, use a wire to reach the hood lock hole from below the engine, and pull to release the front hood. 4. Open the driver's door, remove the door seal, make a hook with thick wire about one and a half meters long, insert it to hook the door motor, and the engine hood can then be opened.
15
3
Share

Is It Normal for a Wet Dual-Clutch Transmission to Make a Clicking Sound When Downshifting?

It is normal for a wet dual-clutch transmission to make a clicking sound when downshifting. The reason is: a dual-clutch transmission is equipped with two clutches, each of which is separately connected to a set of gears, controlling odd-numbered gears and even-numbered gears respectively. When the hydraulic servo system of the clutch or the transmission computer cannot accurately control the separation and engagement of the gears, clicking sounds and jerking may occur. A wet dual-clutch refers to a dual-clutch transmission where the clutch plates are immersed in transmission oil. The method of shifting gears by alternating between the two clutches ensures the smoothness of gear shifts in a wet dual-clutch transmission. There are two types of dual-clutch transmissions: dry and wet. The working principle of the clutch is: 1. When the inner ring is fixed, the outer ring rotates clockwise, and the wedge block does not lock, allowing the outer ring to rotate freely; 2. When the outer ring rotates counterclockwise, the wedge block locks, preventing the outer ring from rotating.
11
5
Share

How to set the seat belt sound for Tiguan L?

Tiguan L's seat belt sound cannot be adjusted; the reminder tone will only turn off when the seat belt is properly fastened. The purpose of the seat belt reminder sound is to alert drivers and passengers to fasten their seat belts through beeping or indicator light flashing while driving, thereby preventing serious physical injuries in case of an accident due to not wearing a seat belt. Below is some relevant information about the Tiguan L: 1. The Tiguan L is produced by SAIC Volkswagen. The new Tiguan L by SAIC Volkswagen is the successor model to the current Tiguan, sharing the same Volkswagen MQB platform as the overseas version of the new Tiguan. 2. The new Tiguan L has been upgraded to a 7-seater model with a 2+3+2 seating arrangement to meet the needs of larger families. Its biggest highlight is the third-row seats featuring a flat-folding design, providing flexible and versatile space combinations. When the third-row seats are folded down, the trunk capacity reaches 1780L, easily meeting various travel requirements of consumers. 3. In terms of power, the Tiguan L 2.0T comes in two versions with different power outputs. The low-power 2.0T version delivers 186 horsepower with a maximum torque of 320 Nm, available between 1500-4000 rpm, and a maximum power output between 4100-6000 rpm, paired with a 7-speed dual-clutch transmission. The high-power 2.0T version offers 220 horsepower with a peak torque of 350 Nm, available between 1500-4400 rpm, and a maximum power output between 4500-6200 rpm. The high-power version deliberately widens the torque and power ranges to ensure uninterrupted power delivery throughout the rev range.
12
4
Share

What is the displacement of 2.5g?

2.5g refers to a 2.5-liter displacement, where 'g' represents the engine model. Displacement is a specialized term in hydraulic transmission, referring to the volume of fluid inhaled or discharged per stroke or cycle. Generally, a larger displacement means the engine releases more energy per unit time, resulting in better power performance. The function of an engine is to convert thermal energy into mechanical energy by burning and expanding gas in a sealed cylinder, pushing the piston to do work, thereby providing power for the vehicle. Methods for engine maintenance include: 1. Using qualified engine oil; 2. Using qualified coolant and antifreeze; 3. Regularly cleaning the radiator scale; 4. Regularly removing engine carbon deposits; 5. Regularly replacing the three filters of the car; 6. Maintaining a reasonable engine speed.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.