How many points will be deducted for motorcycles entering tunnels?

2 Answers
DeEverly
07/24/25 1:34pm
Three points. Below is the relevant content: Depending on the region, the regulations of each province and city: If there is a no-motorcycle sign at the entrance, motorcycles are not allowed to enter the tunnel. For example, the "Qingdao Jiaozhou Bay Tunnel Management Measures (Draft for Comments)" mentions that pedestrians and non-motorized vehicles such as bicycles, electric-assisted bicycles, tricycles, animal-drawn carts, and special vehicles for the disabled are not allowed to enter the tunnel; motorcycles, tractors, low-speed trucks, medium and large trucks, and wheeled and tracked special machinery are also prohibited from passing through the tunnel. Attached laws and regulations: According to Article 89 of the "Road Traffic Safety Law of the People's Republic of China," pedestrians, passengers, and non-motor vehicle drivers who violate road traffic safety laws and regulations regarding road traffic rules shall be given a warning or fined; non-motor vehicle drivers who refuse to accept the fine may have their non-motor vehicles impounded.
Was this review help?
10
2
Share
SanAniyah
08/11/25 7:34am
As a frequent motorcycle rider, I understand the most common mistakes in tunnel riding are not wearing a helmet or speeding, which directly deducts 2-6 points; the sudden change in light at tunnel entrances causes many to overlook speeding, deducting 3 points for under 20% and 12 points for over 50%. I've seen accident cases in mountain tunnel rides, reminding me to slow down, check lights to avoid blind spots. Tunnels are narrow with strong airflow interference, deducting 3 points for not driving in the lane, and stopping is even more dangerous, deducting 9 points. With strict traffic checks every year, it's advisable for riders to develop the habit of wearing full protective gear, testing brakes before entering tunnels—seconds can make the difference in safety and fewer penalty points.
Was this review help?
3
4
Share
Expand All
More Forum Discussions

What letter does Chongqing license plate start with?

The license plates in Chongqing start with the character 'Yu'. Here is an introduction to license plate numbers: 1. In China, license plate numbers are composed of a Chinese character + a letter + numbers; 2. The Chinese character represents the abbreviation of the province where the vehicle is registered, the letter corresponds to the region where the vehicle is located, and the numbers complete the license plate number, serving as a unique identifier for the vehicle; 3. Chongqing is abbreviated as 'Yu'. Among them, 'YuA' is for vehicles managed by the municipal vehicle administration, 'YuB' is for vehicles managed by Jiangnan vehicle administration, 'YuC' includes vehicles managed in Yongchuan, Jiangjin, Hechuan, etc., 'YuF' includes vehicles managed in Wanzhou and other areas, 'YuG' includes vehicles managed in Fuling, Nanchuan, etc., and 'YuH' includes vehicles managed in Qianjiang and other ethnic autonomous counties; 4. To handle vehicle registration, cancellation, and other related information, you need to go to the respective regional vehicle administration offices.
20
3
Share

How Long Can a Bulging Tire Be Driven?

Tires with bulges cannot continue to be used. Bulges in car tires are prone to blowouts, posing a hazard to driving safety. Here are several methods to prevent tire bulges: 1. Tires become thinner after prolonged use, making them more susceptible to bulging. When the tire wear reaches the level of the tread wear indicators, it should be replaced. 2. Avoid driving quickly over rough road conditions or speed bumps, as this can impact the wheel rims and tires. If a bulge is not detected in time, another impact could directly cause a blowout. 3. Regularly check tire pressure. If low tire pressure is detected, it should be promptly replenished; otherwise, prolonged driving with low pressure can easily lead to bulging. 4. When parking, ensure the vehicle is on a flat surface to avoid squeezing the tire sidewalls, which can damage the internal cord layers.
18
0
Share

How many points are deducted for running a red light in Subject 3?

During the Subject 3 test, if a student runs a red light, no points will be deducted, but the test will be failed. This is because the student is a beginner without a driver's license, so points cannot be deducted. More information about running a red light is as follows: 1. Running a red light is a violation of traffic signals. According to the "Road Traffic Safety Violation Scoring Regulations": driving a motor vehicle in violation of traffic signal rules will result in a deduction of 6 points and a fine of 200 yuan. 2. Before being identified as running a red light, three photos must be taken: a photo of the vehicle at the stop line under a red light, a photo of the vehicle crossing the stop line under a red light, and a photo of the vehicle continuing to move beyond the stop line under a red light. 3. If the vehicle only has its front wheels slightly over the stop line at a red light but stops immediately, the traffic police will not impose a penalty. However, if the vehicle completely crosses the stop line before stopping during the red light, it will be considered a violation and penalized.
9
2
Share

What is the maximum speed limit for driving a motor vehicle on muddy roads?

Driving a motor vehicle on muddy roads should not exceed a maximum speed of 30 kilometers per hour. When encountering any of the following situations while driving a motor vehicle, the maximum speed must not exceed 30 kilometers per hour, with tractors, battery-powered vehicles, and wheeled special machinery vehicles not exceeding 15 kilometers per hour: 1. Entering or exiting non-motorized vehicle lanes, passing through railway crossings, sharp curves, narrow roads, or narrow bridges. 2. Making U-turns, turning, or descending steep slopes. 3. Encountering fog, rain, snow, sandstorms, or hail with visibility within 50 meters. 4. Driving on icy or muddy roads.
17
0
Share

Will the Verna's universal joint cause deviation if it's broken?

The vehicle will deviate if the universal joint is broken. Here are the specific details about the universal joint: 1. The universal joint transmission device is installed between the transmission output shaft and the drive axle main reducer input shaft; 2. Front-engine front-wheel-drive vehicles omit the drive shaft, and the universal joint is installed between the front axle half-shaft, which is responsible for both driving and steering, and the wheel. Additional information: 1. Non-constant velocity universal joint: When the angle between the two shafts connected by the universal joint is greater than zero, the output shaft and input shaft transmit motion with a varying instantaneous angular velocity ratio, but the average angular velocity is equal; 2. Quasi-constant velocity universal joint: Refers to a universal joint that transmits motion with equal instantaneous angular velocity at the designed angle and with approximately equal instantaneous angular velocity at other angles; 3. Constant velocity universal joint: A universal joint where the connected output shaft and input shaft always transmit motion with equal instantaneous angular velocity.
8
4
Share

How to Reinstall a Fallen ETC Device?

ETC device installation procedure is as follows: Upon receiving the device, first check if the ETC card and On-Board Unit (OBU) are damaged. Press the anti-tamper button on the back of the OBU. A red light will briefly illuminate, and the OLED screen will display 'Label Invalid' or 'Please Insert Card', indicating the device is functioning normally. Clean the front windshield, ensuring the glass surface is smooth, clean, and dry. Then peel off the adhesive backing film of the OBU and attach it to the installation position. Press firmly for 2-3 minutes to eliminate air bubbles. Insert the ETC card with its front facing the driver and the back facing the windshield, ensuring the chip is properly inserted into the OBU device. ETC installation positions: For small vehicles like cars and minivans, the ETC card and OBU should be installed on the upper middle part of the front windshield. For large vehicles such as trucks and buses, the installation position is on the lower middle part. ETC installation requirements: The height should be no less than 1.2 meters and no more than 2.5 meters; the installation angle N should be between 30º and 90º (the angle between the OBU surface and the horizontal plane).
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.