How many points will be deducted for mistakenly entering the opposite lane at an intersection?

2 Answers
Louis
07/28/25 9:18pm
Mistakenly entering the opposite lane at an intersection will result in a deduction of 3 points, and may also be subject to a warning or fine. The relevant regulations are as follows: 1. According to Article 90 of the "Road Traffic Safety Law of the People's Republic of China": If a motor vehicle driver violates the road traffic safety laws or regulations regarding road traffic rules, they shall be given a warning or fined. If there are other provisions in this law, the punishment shall be carried out in accordance with those provisions. 2. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses": Driving a motor vehicle without following the rules for overtaking or yielding, or driving in the opposite direction, will result in a deduction of 3 points for each violation.
Was this review help?
2
2
Share
LaLydia
08/12/25 1:58am
I remember when I was first learning to drive, I made this exact mistake at an intersection—accidentally driving into the oncoming lane. My palms were sweating from nervousness. In the end, I got caught by a traffic camera, lost a full 3 points, and had to pay a 200-yuan fine. I regretted it so much. That lesson taught me to pay close attention to intersection signs and traffic lights, and not to overlook the arrows on the road, especially at night when visibility is poor. Losing points isn’t just about the fine—the risks are too high. If I had collided with an oncoming car, the consequences would have been unthinkable. Since then, I’ve developed the habit of checking my navigation settings before driving and slowing down to confirm directions at intersections. Now, I drive much more safely. This point-deduction standard is based on China’s traffic rules—similar mistakes usually cost 3 points, but the penalty can be more severe depending on the circumstances.
Was this review help?
17
1
Share
Expand All
More Forum Discussions

How to Turn Off Volkswagen Maintenance Reminder?

Methods to turn off Volkswagen maintenance reminder: 1. Turn off the ignition switch, press the clock adjustment button SET while turning on the ignition switch; 2. Release the SET button, then press the SET button once more, and turn off the ignition switch; 3. Turn on the ignition switch again to check if it has been reset. If not, you must start over. Taking the Volkswagen Lavida as an example, its body dimensions are 4605mm, 1765mm, and 1460mm respectively, with a wheelbase of 2610mm. The design of the Lavida's instrument panel has been slightly modified from the traditional Volkswagen style, eliminating the two small round dials found on the Sagitar and instead using the onboard computer to provide relevant driving information. Additionally, the outer edge of the entire onboard computer is decorated with a circular chrome line, integrating it with the chrome-plated speedometer and tachometer.
19
5
Share

Does the Camry Auto Hold Need to Be Pressed Every Time?

Yes, the Camry Auto Hold needs to be pressed every time. Here are the relevant details: 1. The Auto Hold system, also known as AUTO-HOLD, is labeled differently across models. Some vehicles display the button as "AUTO-HOLD," while others feature a symbol of two semicircles enclosing an "A" inside a circle. Despite the variations in design, the button serves the same function. 2. In certain models, once the Auto Hold function is activated, it remains on permanently. However, in other models, it requires manual activation each time the engine is restarted, depending on the specific vehicle. When the Auto Hold button is pressed, the dashboard will illuminate an indicator light each time the vehicle comes to a complete stop after braking. At this point, there's no need to keep pressing the brake pedal, as the system automatically maintains the braking. The system releases when the accelerator pedal is pressed, making it highly convenient, especially during stop-and-go traffic or when waiting at traffic lights.
16
5
Share

How to Turn on the Fog Lights on the Volkswagen Bora?

Volkswagen Bora's fog light switch is located on the inner side of the control lever and is operated by rotation. Turn it upward once to turn on the front fog lights, and turn it twice to the rear fog light position, which simultaneously activates both front and rear fog lights, and vice versa to turn them off. After turning on the parking lights, you can activate the fog lights. The front fog lights can be turned on individually, while the rear fog lights can only be turned on together with the front fog lights and cannot be activated separately. The Volkswagen Bora has a length, width, and height of 4562mm, 1793mm, and 1468mm respectively, with a wheelbase of 2614mm. While the dimensions have increased, the interior layout has become more rationalized. Compared to the previous generation, the actual interior space of the new Bora has significantly improved, with an increase of up to 20mm in legroom both front and rear, providing a more comfortable and spacious experience for both drivers and passengers.
11
0
Share

How to Remove Engine Oil Stains from Pants?

Alcohol can dissolve in both organic solvents and water. The higher the alcohol concentration, the better, with anhydrous alcohol being the best option. Alcohol is available at pharmacies or chemical supply stores. For oil stains on clothes, you can use turpentine, banana oil, or gasoline to scrub them, then soak the garment in a 3% saltwater solution for a few minutes, and finally rinse with clean water.
1
2
Share

How long does it take for a new car's valves to stop making noise during the break-in period?

New car break-in period is generally between 1,000-1,500 kilometers. Although modern car engines undergo cold running-in treatment before leaving the factory, the more important role of the break-in period is to develop good driving habits. Definition of break-in period: The break-in period generally refers to the process where mechanical components make initial contact, friction, and engagement during operation. Precautions during break-in period: Avoid emergency braking when possible: Emergency braking not only shocks the braking system during break-in but also increases impact loads on the chassis and engine. It's best to avoid emergency braking within the first 300 kilometers of driving. Avoid overloading: Running a new car at full capacity during break-in can damage mechanical components. Therefore, within the first 1,000 kilometers of driving, the load should generally not exceed 75-80% of the rated capacity.
2
0
Share

What are the reasons for a cold engine not starting?

The reasons for a cold engine not starting: the cold start injector is not injecting fuel, coolant temperature sensor failure, intake sensor failure, poor injector atomization, intake pipe carbon buildup, spark plug failure, idle control valve failure, etc. If there is no strong gasoline smell from the exhaust pipe, it indicates a lack of fuel in the cylinders, which may be due to issues with the fuel pump, fuel lines, or fuel pump circuit. If the engine shuts down due to overheating protection after high water temperature, it is recommended to check the electric fan, clean the radiator, or inspect the water temperature sensor for faults. Poor quality fuel can also affect car starting. Inferior fuel often has poor volatility, especially in winter when temperatures are low. During cold starts, the engine block temperature is low, making fuel atomization difficult, which results in the fuel injected into the cylinders not mixing sufficiently with air, causing starting difficulties or even failure to start.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.