How many points will be deducted for failing to yield when driving a motor vehicle as required?

1 Answers
OEmiliano
07/29/25 11:43pm
One point will be deducted. The following violations will result in a one-point deduction: 1. Situation 1: Driving a motor vehicle without using lights as required. 2. Situation 2: Driving a motor vehicle without yielding as required. 3. Situation 3: Driving a motor vehicle with cargo exceeding the prescribed length, width, or height. 4. Situation 4: Driving a motor vehicle on the road without displaying inspection and insurance marks or carrying the vehicle license and driver's license. Below are the relevant regulations on yielding: 1. Regulation 1: When there are traffic signs or markings, yield to the party with the right of way. 2. Regulation 2: When there are no traffic signs or markings, stop before entering the intersection and yield to vehicles coming from the right. 3. Regulation 3: Turning motor vehicles must yield to vehicles going straight. 4. Regulation 4: Right-turning motor vehicles from opposite directions must yield to left-turning vehicles.
Was this review help?
11
0
Share
More Forum Discussions

Can the broken shock absorber dust cover be ignored?

It must be replaced because sand and dust can easily enter during driving, which will affect the lifespan of the shock absorber. It is recommended to replace it as soon as possible. The function of the shock absorber dust cover: As the name suggests, the main function of the shock absorber dust cover is to prevent dust, but it is not just about dust prevention. Additionally, the shock absorber dust cover also plays a protective role, preventing the lubricating oil inside from leaking out and protecting the shock absorber from being covered by dust, thereby ensuring the shock absorber maintains optimal working conditions. Effects of a damaged shock absorber dust cover: A damaged shock absorber dust cover can directly lead to the failure of the shock absorber, reducing its damping effect. It can also cause more other issues, such as premature wear of the shock absorber oil seal, oil leakage from the shock absorber, engine jolting and loosening, etc.
10
4
Share

Which domestic manufacturer produces Brembo brake pads?

Brembo brake pads are produced domestically by JinQilin Group in Laoling City, Shandong Province. Differences between domestic and imported Brembo brake pads: There are still differences between domestic Brembo brake pads and imported Brembo brake pads. Domestic Brembo brake pads are red, while imported Brembo brake pads are black. Apart from the color difference, there is no difference in performance and quality between domestic and imported versions. They are the same brand, just manufactured in different locations. Introduction to Brembo company: Brembo is a globally renowned multinational company providing high-performance automotive braking systems. It is a world leader in automotive braking system technology and is widely recognized as an innovative reformer in the industry. Brembo offers a full range of high-quality aftermarket parts and can select the best braking system product combination for your vehicle.
4
1
Share

What is the fault code R07 for parking diesel heater?

Parking diesel heater R07 is generally caused by insufficient fuel or fuel line blockage. Basic principle of diesel heater: The basic principle of a diesel heater is that it is a small internal combustion engine that directly burns diesel to obtain heat, and then uses the machine's heat dissipation to warm the cab. The diesel heater is also known as an air heater as it heats the air in the cab. Working principle of diesel heater: The diesel pump draws diesel from the fuel tank and delivers it to the combustion chamber, where the mixed gas is ignited by the ignition plug and burns in the combustion chamber. The exhaust gas produced by burning diesel is discharged through the exhaust port (to the outside of the vehicle). The outer wall of the combustion chamber is made of aluminum alloy with heat dissipation fins for fast heat conduction. The fan directly blows air towards the combustion chamber to send out the hot air.
7
4
Share

Will Retake Candidates for Subject 3 Exam Be Prioritized?

Generally, candidates who fail the Subject 3 exam and retake it will be treated the same as other examinees without any priority. Subject 3 Exam Content: The Subject 3 exam assesses the examinee's ability to drive a motor vehicle on actual roads, including pre-start preparations, starting, passing intersections, obeying traffic signals, driving according to road markings, lane changes, meeting oncoming vehicles, overtaking, and parking at designated spots. It evaluates the examinee's capability to correctly operate the vehicle, observe and judge road conditions and driving environments, and comprehensively control the vehicle. Additionally, it tests the examinee's knowledge of using various lights during nighttime and low visibility conditions, as well as their awareness of traffic regulations and safe driving practices. Precautions for Subject 3 Exam: Checking the vehicle's condition is a crucial step. Failing the exam due to vehicle issues would be regrettable, so it's essential to ensure the vehicle is in proper working order before the exam. This includes checking tire pressure, functioning lights, and normal dashboard indicators. Only after confirming the vehicle's normal condition can the exam begin. Avoid continuous lane changes during the exam, and adhere to the basic exam rules. The exam route typically consists of several lanes.
13
1
Share

Why do modern diesel vehicles require urea fluid?

Diesel vehicles use urea fluid to reduce exhaust emissions and protect the atmospheric environment. The purpose of adding urea is to convert harmful nitrogen oxides in the exhaust into nitrogen and water. Engine exhaust poses severe pollution risks to the atmosphere, and as environmental regulations become increasingly stringent, exhaust treatment systems have been developed to ensure compliance. The primary harmful components in diesel exhaust are nitrogen oxides and particulate matter. The exhaust treatment system helps reduce particulate emissions. Once urea is introduced into the system, it is injected into the exhaust treatment unit whenever the engine is running. Under high temperatures, the urea decomposes into ammonia gas.
16
4
Share

What are the three filters?

Automotive three filters refer to the air filter, fuel filter, and oil filter. Definition of automotive three filters: The automotive three filters, also known as the three major filters, are the air filter, fuel filter, and oil filter. Their function is to filter impurities or gases in the air, fuel, and oil, thereby protecting the engine and improving its working efficiency. Timely cleaning and maintenance of the three filters can fully utilize the engine's performance, reduce the engine failure rate, and help extend the engine's service life. Main functions of the three filters: The air filter ensures the cleanliness of the air entering the engine, the fuel filter ensures the cleanliness of the fuel and prevents vapor lock, and the oil filter filters the oil to ensure the normal operation of the engine, making it the most important component among the three filters.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.