How many points will be deducted for driving at 70 km/h in a 60 km/h speed limit zone?

1 Answers
OEmmett
07/30/25 2:22am
If the current highway speed limit is 60 km/h and the actual speed reaches 70 km/h, no points will be deducted. According to the new traffic regulations implemented on April 1, 2022, speeding within 20% of the prescribed speed limit does not result in point deductions. The calculation formula is: (70-60)/60×100%=10/60×100%≈16.7%, which means the speed exceeds the limit by 16.7%, so no points will be deducted. Point deduction standards after the implementation of the new traffic regulations on April 1, 2022: Exceeding the speed limit by less than 10%: warning, no fine or point deduction; Exceeding the speed limit by more than 10% but less than 20%: a fine of 200 yuan, no point deduction; Exceeding the speed limit by more than 20% but less than 50%: a fine of 200 yuan, 6 points deducted if on highways and urban expressways, 3 points deducted on ordinary roads; Exceeding the speed limit by more than 50%: 12 points deducted if on highways and urban expressways, 6 points deducted on ordinary roads. Hazards of speeding: Increased reaction distance: When a vehicle travels at 60 km/h, the average reaction time from recognizing danger to applying the brakes is about 0.7 to 1.0 seconds, with a reaction distance of approximately 17 meters (free travel distance). At 120 km/h, the reaction distance increases to about 39 meters (free travel distance), doubling the risk. Increased vehicle wear: High-speed operation intensifies the workload and stress on the vehicle, accelerating wear and damage to components. This is particularly detrimental to the tires, causing jumping and skidding wear, raising friction temperatures, and leading to rapid aging and deformation, increasing the risk of blowouts. Disruption of normal traffic flow: Speeding inevitably leads to frequent overtaking and meeting situations, increasing the driver's psychological stress and interfering with normal traffic flow. If the driver lacks quick reflexes, they may be unable to handle sudden dangers, losing control of the vehicle. Reduced reaction ability: At high speeds, the driver's focus shifts further ahead, narrowing the field of vision. Objects outside the window pass by quickly, and it takes about 0.4 seconds to sense a target and an average of 1 second to clearly identify it. In dangerous situations, there may not be enough time to judge and take emergency measures. Extended braking distance: As speed increases, the vehicle's braking performance decreases, friction coefficients drop, and braking distances lengthen, making it harder to stop in time. Additionally, higher speeds increase vehicle vibration and jolting, compromising safe driving. Worsened accident consequences: The kinetic energy of a moving object is proportional to its mass and the square of its speed. Experiments show that a vehicle hitting a concrete wall at 60 km/h is equivalent to falling from a height of 14 meters (5 stories). At 100 km/h, it is equivalent to falling from 39 meters (13 stories), with extremely severe consequences.
Was this review help?
14
1
Share
More Forum Discussions

Is the CVT transmission of the Nissan Murano durable?

The CVT transmission of the Nissan Murano is durable. The Murano is equipped with Nissan's latest generation XTRONIC-CVT continuously variable transmission, featuring a simulated 6-speed manual mode. Below are more details about the Nissan Murano: 1. Body Dimensions: The Nissan Murano is Nissan's first large crossover SUV, with a length of 4860mm, width of 1885mm, height of 1730mm, and a wheelbase of 2825mm. 2. Powertrain: The Nissan Murano is powered by a 3.5L-CVT engine, paired with a 6-speed manual/automatic transmission, and features front-engine, four-wheel drive. 3. Vehicle Features: It comes equipped with high-end amenities typically found in luxury vehicles, including automatic climate control, automatic-adjusting wipers, power front and rear windows, ambient interior lighting, headlight washers, an 8-speaker audio system, a color central control screen, and an iPod interface.
6
0
Share

What is the fuel consumption of the Hyundai ix35 2.0 automatic transmission?

The average fuel consumption of the Hyundai ix35 2.0 automatic transmission is 8.55 liters per 100 kilometers. Here is more information about the Hyundai ix35: 1. Body dimensions: The Hyundai ix35 is a compact SUV under the Hyundai brand. The car's length, width, and height are 4435 mm, 1850 mm, and 1680 mm respectively, with a wheelbase of 2640 mm. 2. Powertrain: The ix35 offers two engine options: a 2.0-liter and a 2.4-liter. Both engines are the new Theta II generation dual CVVT all-aluminum four-cylinder gasoline engines. The 2.0-liter engine has a maximum output power of 120kW (163 horsepower)/6200rpm and a maximum torque of 194 Nm/4600rpm. The 2.4L engine has a maximum output power of 128kW (174 horsepower)/6000rpm and a maximum torque of 226 Nm/4000rpm.
16
5
Share

What Are the Differences Between 1.4T and 1.6L Engines in Cars?

The differences between 1.4T and 1.6L engines in cars are as follows: 1. Displacement: The 1.4T engine has a smaller displacement than the 1.6L engine. 2. Engine Type: The 1.4T uses a turbocharged engine, while the 1.6L is naturally aspirated. 3. Quality: Vehicles with 1.4T engines generally offer better performance, but those with 1.6L engines have lower maintenance costs and relatively better reliability. The meaning of 'Golden Displacement' can be interpreted from three aspects: 1. Fuel efficiency; 2. Good handling, power, and comfort; 3. Ability to meet various consumer needs: Such as business, commuting, travel, etc. In other words, it refers to vehicles that can maximally satisfy various consumer demands at a reasonable price, hence the term 'golden displacement' and 'golden models'.
20
2
Share

What Causes a Sudden Loss of Power in a Car?

Causes of a sudden loss of power in a car include fuel supply system failure and intake system failure. If you notice a lack of power in your car, perform an engine fault diagnosis to check for any trouble codes. If present, follow the trouble codes for repairs. Below is a detailed analysis of the causes: Fuel Supply System Failure: Insufficient fuel entering the combustion chamber can lead to a loss of power. Causes include clogged fuel injectors, leaking fuel lines, a blocked fuel filter, or an aging fuel pump. Solution: Visit a 4S shop for a fuel system inspection. If issues are found with the fuel injectors, fuel lines, or fuel pump, address them promptly. Intake System Failure: For a car's engine to operate, it requires not only fuel but also air; otherwise, the engine cannot run smoothly. Causes of power loss include a dirty or clogged air filter or throttle system, malfunctioning intake temperature or pressure sensors, or a faulty mass air flow sensor. Solution: Inspect the air filter and throttle system. If blockages are found, clean them promptly.
19
3
Share

How to Wire a Motorcycle for Hazard Lights?

Motorcycle hazard light wiring: Connect the three wires of the turn signal switch directly to the three wires of the hazard light switch. The middle wire of the turn signal switch connects to the input of the hazard light switch, and the remaining two wires can be connected randomly. Scenarios for using hazard lights on motorcycles: Driving in foggy conditions: Due to poor visibility in foggy weather, it is advisable to not only turn on the hazard lights but also activate the fog lights to alert passing vehicles and provide illumination. In case of a breakdown or traffic accident on the road: Hazard lights should be turned on to alert passing vehicles to drive safely. When towing a malfunctioning vehicle: Both the towing vehicle and the towed vehicle should activate the hazard warning lights to indicate that the vehicle is in an abnormal state. Hazard lights are the highest-level warning lights, so many people instinctively turn them on in heavy fog. However, this practice is prohibited in some countries because it can make it difficult for following vehicles to determine the direction the leading vehicle is taking. Never change lanes with hazard lights on. Avoid changing lanes in foggy conditions if possible. If lane change is necessary, turn off the hazard lights and use the turn signals. If driving on a highway, the driver should activate the turn signal at least 500 meters before changing lanes or exiting the ramp.
12
5
Share

What are the reasons why the air pump cannot build up pressure?

The reasons why the air pump cannot build up pressure include motor phase loss, damaged air pump seal, pressure relief valve set too low, or clogged air pump tubing. Below are detailed explanations and solutions: Motor phase loss: Motor phase loss prevents the motor from outputting rated power, thereby limiting the air pump's maximum output pressure. As the air pump pressure increases, the motor load gradually increases, and power consumption rises accordingly. The solution is to check the electrical circuit. Damaged air pump seal: This causes air leakage between the high and low pressure chambers. Most air pumps are piston-type, similar in structure to hydraulic cylinders. The piston head has seals that can wear out or degrade over time due to normal wear and aging, allowing air to bypass between the high and low pressure chambers and preventing pressure buildup. The solution is to disassemble the fuel pump compressor and replace the seals. Pressure relief valve set too low: For safety reasons, air pumps have a pressure relief valve at the output to prevent dangerously high pressure. If this valve is set too low, the air pump will automatically shut down whenever the pressure reaches the relief setting. The solution is to adjust the pressure relief valve to a higher setting. Clogged air pump tubing: Disconnect the air pump tubing from the dryer and operate the pump. If black smoke-like substances emerge from the tubing, it indicates clogged air pump tubing. The solution is to replace the air pump tubing.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.