How many points will be deducted for changing two lanes consecutively?

1 Answers
StReed
07/30/25 2:47am
For motor vehicles violating prohibited markings, driving a motor vehicle and changing two lanes consecutively at one time, motor vehicles not using turn signals as required, and motor vehicles affecting the normal driving of other vehicles when changing lanes, the above four violations will result in a penalty of 4 points deducted. Below is a detailed introduction to traffic regulations: 1. Definition: Traffic regulations are the abbreviation of "traffic rules," and when abbreviated, it usually specifically refers to the traffic management laws and regulations currently in effect in China. Starting from New Year's Day in 2013, the revised "Regulations on the Application and Use of Motor Vehicle Driving Licenses" will come into effect, and running two red lights will require retraining and classes. 2. Changes: The new regulations involve changes in multiple aspects such as motor vehicle driver tests, daily management of driving licenses, and point deductions for traffic violations: drivers of large and medium-sized passenger and cargo vehicles who have no points deducted within one year can be exempted from the annual inspection; drivers who do not fasten seat belts as required will have 2 points deducted at one time; those who have used or injected drugs within 3 years are not allowed to apply for a motor vehicle driving license, etc.
Was this review help?
2
3
Share
More Forum Discussions

What are the hazards of tire pressure loss in BMW 3 Series?

Tire pressure loss in BMW 3 Series can increase tire body deformation, easily causing cracks on the tire sidewalls while generating flexing motion. This leads to excessive heat buildup, accelerating rubber aging, fatigue of the cord ply, and breakage of cord wires. It also increases the tire's contact area with the ground, accelerating wear on the tire shoulders. Causes of tire pressure loss: During vehicle usage, tire pressure loss may occur. If it's simply air leakage, inflation is sufficient. If the tire is damaged, timely repair or replacement is necessary. Tire pressure loss isn't terrifying - what matters is that owners understand its hazards and address it promptly to prevent accidents. Definition of tire pressure: Strictly speaking, it refers to the air pressure inside the tire. In automotive maintenance, while the engine is considered the heart of a car (its failure means the end of the vehicle's life), tire pressure is like the car's blood pressure. The level of tire pressure plays a crucial role in the vehicle's performance and power.
7
3
Share

What are the steps for removing an automatic transmission?

Steps for removing an automatic transmission: 1. Remove the torque converter from the front of the automatic transmission, loosen the fastening bolts, detach the torque converter housing at the front of the automatic transmission, remove the output shaft flange and the rear housing of the automatic transmission, and detach the speed sensor's induction rotor from the output shaft; 2. Remove the oil pan by taking out the connecting bolts of the oil pan, then insert the blade of a specialized repair tool between the transmission and the oil pan to cut through the applied sealant; 3. Disconnect all wiring harness connectors attached to the valve body, remove each solenoid valve and the throttle cable connected to the throttle valve, carefully pry off the hydraulic oil pipes with a screwdriver, loosen the fixing bolts between the oil inlet filter screen and the valve body, and remove the oil inlet filter from the valve body; 4. Remove the connecting bolts between the valve body and the automatic transmission housing, take out the valve body assembly, extract the check valve, spring, and accumulator piston from the oil passage of the automatic transmission housing, and remove the manual control valve lever and the parking lock pawl. If necessary, the manual control valve operating shaft can also be removed.
1
2
Share

Which Mercedes-Benz Series Have Ambient Lighting?

Currently, almost all models under the Mercedes-Benz brand come equipped with ambient lighting, from the top-tier S-Class down to the A-Class, making it a standard feature. Moreover, Mercedes-Benz offers up to 64 color options for its ambient lighting, which indeed adds a luxurious touch when illuminated at night. The Role of Ambient Lighting: Lighting serves as a tool to set the mood, and different colored lights can be used to create and express various atmospheres and moods. At the same time, well-designed ambient lighting can enhance one's mood and make driving more enjoyable. In Mercedes-Benz vehicles, the primary purpose of ambient lighting is decorative, with mood enhancement being a secondary benefit. Typically, ambient lighting comes in colors such as orange, blue, and green, and it also provides some degree of illumination. The lights are installed in locations like the door armrests, center console, and footwell. Installing Ambient Lighting: Since not all Mercedes-Benz models and versions come with factory-installed ambient lighting, owners who desire this feature for personal preference are advised to opt for the factory ambient lighting package. If the factory option is not available, the best alternative is to have ambient lighting professionally installed at a specialized facility. This remains the most reliable method outside of the factory option.
14
5
Share

Why does the BMW 3 Series display a low coolant warning?

Low coolant means the coolant level is below the normal level, and the cooling system needs to be inspected. Thermostat failure: The thermostat is a component that automatically acts as a valve based on the engine's water temperature. It is usually installed at the outlet of the radiator and the inlet of the water pump. When the coolant temperature is low, the thermostat blocks the low-temperature coolant from the radiator, preventing it from entering the engine water jacket. This allows the water temperature in the jacket to rise quickly. When the water temperature reaches a certain level, the valve gradually opens, allowing the coolant from the radiator to circulate again. This coolant flows through the radiator, slowly increasing the water temperature while dissipating heat into the atmosphere, maintaining the engine's water temperature at an appropriate level—this is known as the major circulation. If the thermostat malfunctions and the valve cannot close, the coolant remains in the major circulation, potentially causing the engine's water temperature to drop too low. Alternatively, some vehicles may have their thermostats removed during summer to lower the temperature, which can also result in very low engine water temperatures. Radiator fan running continuously: Another issue is the radiator fan. For electric fans, circuit faults can cause the fan to run continuously. For viscous fans, a faulty viscous clutch can also lead to continuous fan operation. These issues can result in abnormally low water temperatures.
9
0
Share

What are the dimensions of the Baojun E100?

Baojun E100's exterior dimensions are 2488/1506/1670mm (length/width/height), with a wheelbase of 1600mm, a turning radius of only 3.7m, and a curb weight of 840kg. Exterior features: The Baojun E100 features a perforated grille on the front face with smooth lines. The A-pillars are blackened, combined with a two-tone body design, creating a visual effect of a floating roof. The Baojun E100 is equipped with a floating roof, sharp rising waistline, flared wheel arches, blackened lens headlights, roof shark fin antenna, and other design elements. Configuration: The Baojun E100 comes standard with lens headlights, front fog lights, LED turn signals, multifunction steering wheel, 7-inch instrument panel, one-touch window down, rear parking radar, 2 USB ports, onboard 4G Wi-Fi, onboard Bluetooth, App car connectivity, and four-wheel disc brakes. The Zhixiang (Intelligent Enjoyment) version adds features such as electric adjustment for exterior rearview mirrors, keyless entry/one-touch start, electronic parking brake, 4-way seat adjustment, electronic stability program, ISOFIX interface for the front passenger seat, and 5 USB ports.
4
3
Share

What is the fuel consumption of the Baojun RC-5W?

The comprehensive fuel consumption per 100 kilometers for the Baojun RC-5W 1.5T model is 6.8L. Here is an introduction to the Baojun RC-5W: Power The Baojun RC-5W 1.5T model is equipped with a simulated 8-speed CVT transmission, which helps maintain the engine in an economical RPM range, improving the vehicle's fuel efficiency. Additionally, this simulated 8-speed CVT transmission utilizes Bosch's latest generation steel belt technology, enhancing the durability of the transmission and improving its transmission efficiency. With a transmission efficiency as high as 88.6%, it surpasses the operational efficiency of dual-clutch transmissions available in the market. Features The Baojun RC-5W also comes with up to 17 autonomous driving assistance systems, such as ACC adaptive cruise control, which can be activated at speeds ranging from 0-150km/h. It allows drivers to relax their feet during urban driving, highway cruising, or road trips, reducing fatigue. Other systems include LDW lane departure warning, LKA lane keeping assist, TJA traffic jam assist, and more, providing comprehensive safety for various driving scenarios and making driving more convenient and secure.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.