How many points will be deducted for a motorcycle speeding over 50%?

What to Do If a Newly Licensed Vehicle Cannot Be Found on 12123?

Here are the reasons why a newly licensed vehicle cannot be found on 12123: 1. It may be because the data from the traffic police department's system has not been updated to the 12123 software system. You need to wait for the system data to synchronize completely before you can view it. 2. It may be because the correct issuance address of the driver's license was not selected during registration, causing some data to not display or be delayed. You need to select the driver's license transfer option and transfer it to the issuance address of the driver's license for it to display. Notes: 1. If you fail to undergo inspection for three consecutive cycles, your highest permitted driving model qualification will be revoked. 2. According to Article 78 of the "Regulations on the Application and Use of Motor Vehicle Driving Licenses" (Ministry of Public Security Order No. 139), if you do not participate in the inspection for three consecutive scoring cycles, the vehicle management office will revoke your highest permitted driving model qualification and notify the motor vehicle driver to apply for a downgrade and license replacement within 30 days. If the downgrade and license replacement are not processed within the specified time, the vehicle management office will announce the revocation of the permitted driving model qualification as invalid.

2

5

Share

What Causes the Squeaking Sound in Motorcycle Shock Absorbers?

Motorcycle shock absorber noise is generally caused by severe wear of the rubber sleeve. Replace it with a new one or regularly add some lubricant. Related information: 1. The role of shock absorbers: Shock absorbers are mainly used to suppress the oscillation after the spring absorbs vibration and rebounds, as well as impacts from the road surface. When passing over uneven roads, although the vibration-absorbing spring can filter out road vibrations, the spring itself still has reciprocating motion, and the shock absorber is used to suppress this spring bouncing. If the shock absorber is too soft, the body will bounce up and down; if the shock absorber is too hard, it will create too much resistance, hindering the normal operation of the spring. 2. Matching of shock absorbers: In the process of modifying the suspension system, hard shock absorbers should be paired with hard springs, and the hardness of the spring is closely related to the weight of the vehicle. Therefore, heavier vehicles generally use harder shock absorbers. The device connected to the vibration-damping crankshaft is used to counteract the torsional vibration of the crankshaft (i.e., the phenomenon where the crankshaft twists due to the impact force of cylinder ignition).

15

2

Share

What Causes the Wiper Blade to Shake on a New Car?

New car wiper blades shaking during use is primarily due to the high friction coefficient between the wiper blade and the glass surface. This can be categorized into the following scenarios: 1. Uneven contact between the wiper blade and the glass: Some parts of the rubber blade are pressed too hard against the surface while others receive minimal pressure, leading to uneven force distribution during wiper movement and resulting in shaking at certain points. 2. Dirt or foreign objects on the wiper blade or glass surface: When the wiper passes over these areas, resistance increases significantly, causing shaking. 3. Deformed wiper arm: If the wiper arm is bent and not perfectly parallel to the windshield, it will cause shaking.

18

2

Share

Which Side is the First Cylinder of the Engine Counted From?

The standard method for determining the first cylinder of an engine is based on the pulley side as the first cylinder. Common cylinder counts for automobile engines include 3, 4, 5, 6, 8, 10, and 12 cylinders. With the same cylinder bore, more cylinders result in larger displacement and higher power output. Conversely, with the same displacement, more cylinders allow for a smaller bore, enabling higher rotational speeds and thus greater power enhancement. Cylinder: A cylinder is the cavity in the engine block where the piston is housed, serving as the track for piston movement. It consists of the cylinder barrel, end covers, piston, piston rod, and seals. Combustion and expansion of fuel occur within the cylinder, enabling the engine to function properly. If the cylinder volume is too large, the piston weight increases, combustion efficiency decreases, ultimately affecting the smooth output of the cylinder. Since a single-cylinder engine ignites only once every two rotations of the crankshaft, operation is very uneven. Later, by increasing the number of cylinders, small amounts of fuel are burned sequentially, making operation smoother. Automobile Engine Principle: This allows the pistons to become smaller and movement more convenient, making the engine's rotation more flexible. However, to increase rotational speed, more power is needed, but due to the need to balance durability and efficiency, the upper limit of rotation cannot be changed. In summary, increasing the number of cylinders makes the engine operation more flexible and reduces noise.

4

2

Share

What is the appropriate speed for a new car on the highway?

During the break-in period, it is advisable to drive a new car at around 80 km/h on the highway. Below is relevant information about driving on the highway: 1. Introduction to highways: Highways refer to high speeds, compared to medium and low speeds. In environments where low speeds are predominant, low speed is considered normal or standard, while in environments where medium speeds are predominant, medium speed is considered normal or standard. 2. Precautions before driving on the highway: Check the weather and road conditions, conduct a safety inspection of the vehicle, study the driving route in advance, carry a vehicle breakdown warning sign and a fire extinguisher, and plan the driving and rest schedule beforehand.

16

3

Share

What are the effects of a new car's engine speed exceeding 5000 RPM?

There is no impact. During factory production, engines undergo high-load testing. At 5000 RPM, the average piston speed is significantly lower than 80 feet per second, which falls within the safe speed range. Below is relevant information about engine speed: 1. Overview: The engine speed determines the number of work cycles per unit time or the effective power output of the engine, meaning the engine's effective power varies with different speeds. Therefore, when specifying the engine's effective power, the corresponding speed must also be indicated. 2. Speed measurement: Typically, a speed sensor is used, corresponding to the signal teeth on the flywheel, to measure the engine's speed.

14

2

Share

How many points will be deducted for a motorcycle speeding over 50%?

What to Do If a Newly Licensed Vehicle Cannot Be Found on 12123?

What Causes the Squeaking Sound in Motorcycle Shock Absorbers?

What Causes the Wiper Blade to Shake on a New Car?

Which Side is the First Cylinder of the Engine Counted From?

What is the appropriate speed for a new car on the highway?

What are the effects of a new car's engine speed exceeding 5000 RPM?

Are There Flood-Damaged New Cars?

Is There Insurance for New Cars?

Where is the tire pressure display for the 2021 Audi A6L?

Is the Red Light Camera Activated Three Seconds After the Red Light Turns On?