How many points will be deducted for a motorcycle driving on a zebra crossing?

3 Answers
Declan
07/29/25 8:41am
Riding a motorcycle on a zebra crossing will result in a deduction of 2 points, as it is considered occupying a non-motorized vehicle lane. Below is a detailed introduction about zebra crossings: Introduction to zebra crossings: A zebra crossing refers to a series of parallel white solid lines, originating from stepping stones in ancient Rome. Origin of zebra crossings: In the early 1950s, the British designed a striped pedestrian crossing on the streets, stipulating that pedestrians could only cross the street at these designated crossings. As a result, prominent horizontal lines appeared on the streets of London, resembling the white stripes on a zebra, hence the name zebra crossing.
Was this review help?
18
5
Share
RachelLee
08/12/25 6:25am
I've been riding motorcycles for so many years, and the most headache-inducing issue is the safety at zebra crossings. Riding through a zebra crossing is particularly dangerous, as pedestrians can easily be hit and even severely injured. According to regulations, if a motorcycle fails to yield to pedestrians at a zebra crossing, the rider usually gets 3 points deducted from their license and a fine of 200 yuan. Once, I was riding fast on a rainy day and almost hit an elderly person crossing the street. Since then, I always slow down at zebra crossings and check the pedestrian signals in advance. Traffic safety isn't just about penalty points—it's about human lives. Developing the habit of slowing down and yielding, especially in urban areas where speed isn't the priority, is crucial. Motorcycles are agile, but that doesn't mean they can be driven recklessly. The legal point deduction system is designed to reduce accident rates. It's best for everyone to install a dashcam to record road conditions and avoid disputes. Practicing safe braking techniques regularly is also important—life is precious.
Was this review help?
11
2
Share
Expand All
CarlosDella
10/05/25 7:49am
As an ordinary car owner, I believe traffic rules must be strictly followed, otherwise you'll face a lot of trouble. Motorcycles recklessly charging through crosswalks is absolutely illegal, with the standard penalty being 3 demerit points plus a 200 yuan fine. This is no small matter—accumulating 12 points means having to retake the driving test, and losing money is even more frustrating. Why so strict? Crosswalks are protective zones for pedestrians, and motorcycles as motor vehicles must yield; otherwise, you'll bear full responsibility for any accidents, and insurance may not cover it. Enforcement varies slightly by region, but the rules are generally consistent. I recommend maintaining low speed when crossing intersections on a motorcycle and staying observant; safe driving not only avoids point deductions but also saves you hassle and money. Cultivate good habits like stopping at red lights and going on green—big wisdom lies in small details. Don't sacrifice long-term safety for momentary convenience, or you may regret it.
Was this review help?
11
1
Share
Expand All
More Forum Discussions

How to Properly Jump Start a Car?

Correct method for jump starting a car: 1. Connect the red clamp to the positive terminal of the dead battery, then connect the other end of the red cable to the positive terminal of the booster car; 2. Connect the black clamp to the negative terminal of the booster car, then connect the other end of the black cable to the negative terminal of the dead battery or a suitable grounding point. Precautions for jump starting: 1. Keep the booster car running, and start the dead car normally after completing the jump start procedure; 2. When possible, it's recommended to let the revived car run for more than half an hour to ensure sufficient charging; 3. Avoid contact between positive and negative terminals and ensure correct polarity connection during jump starting.
10
0
Share

What maintenance items should be done for a family sedan at 60,000 kilometers?

The thermostat of the Magotan is located inside the plastic pipe at the interface of the upper and lower water pipes, and it is integrated. Working principle of the thermostat: The thermostat automatically adjusts the amount of water entering the radiator based on the temperature of the coolant, changing the circulation range of the water to regulate the heat dissipation capacity of the cooler and ensure the engine operates within the appropriate temperature range. The thermostat must be kept in good technical condition; otherwise, it will seriously affect the normal operation of the engine. Too late and too early: If the main valve of the thermostat opens too late, it will cause the engine to overheat; if the main valve opens too early, it will prolong the engine warm-up time, causing the engine temperature to be too low.
3
4
Share

What Causes Noise in the Steering Gear?

Reasons for noise in the steering gear: Lack of Lubrication: If there is a lack of lubrication in the screws inside the steering wheel, you need to remove the steering wheel cover and add lubricating oil. This should allow smooth movement in the track and pivot areas. Steering Gear Malfunction: The steering gear might also malfunction. Normally, if the steering wheel is turned too sharply while turning, it puts a greater load on the steering gear, leading to severe wear and resulting in abnormal noises. It is recommended to inspect and replace the faulty components. Insufficient Tire Pressure: Uneven tire pressure in the left front or right front tire can cause the car to pull to one side, leading to unbalanced wheel bearings, misaligned steering gear, and resulting in abnormal noises and pulling.
14
5
Share

What to Do When the Tachometer Needle Fluctuates During Cold Start?

Solutions for fluctuating tachometer needle during cold start are as follows: 1. Check the throttle valve: Inspect if the throttle valve is excessively dirty, clean and recalibrate it. 2. Inspect the intake system: Check for excessive carbon buildup in the engine intake system and fuel injectors. Perform a no-disassembly cleaning and replace the fuel filter. Note: For gasoline engines, when the ambient temperature is not lower than -5°C, and for diesel engines, when the ambient temperature is not lower than 5°C, up to three start attempts (including three) are allowed, with each attempt not exceeding 5 seconds, and the engine must start successfully. Under normal operating temperature, the engine should start successfully within 5 seconds in one attempt. After a cold start, the engine warm-up process should comply with the original design specifications regarding RPM.
15
1
Share

What is the gear ratio of a transmission?

Gear ratio refers to altering the gear ratio of the vehicle's main reducer. All vehicle rear axles are equipped with a reducer, which reduces the rotational speed from the driveshaft. The gear ratio is the transmission ratio—for example, if the driveshaft rotates at 4.1 r/s, it will be reduced to 1 r/s. The relationship between gear ratio and torque: The larger the gear ratio, the greater the output torque and the slower the output speed; the smaller the gear ratio, the smaller the output torque and the faster the output speed. Common applications of gear ratio: To achieve greater power (torque) output for climbing hills or heavy loads, selecting a relatively larger main gear ratio (such as 6.833) can meet the demand, but it also sacrifices vehicle speed.
1
1
Share

Where is the fuel pump located on the BMW X5?

The high-pressure fuel pump of the BMW X5 is located on the engine block, while the fuel pump is situated under the right rear seat. The fuel pump is a lightweight and compact device, categorized into three main types: in-line, distributor, and single-unit. The fuel pump requires a power source to operate, with its lower camshaft driven by the engine crankshaft gear. Taking the 2021 BMW X5 as an example, its body dimensions are 4930mm in length, 2004mm in width, and 1776mm in height, with a wheelbase of 2975mm and a fuel tank capacity of 83 liters. This model is equipped with a 2.0T turbocharged engine, delivering a maximum power of 195kW and a maximum torque of 400Nm, paired with an 8-speed automatic transmission.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.