How many points will be deducted for a driver violating traffic signals once?

2 Answers
DeFernando
07/29/25 5:38am
Driving a motor vehicle in violation of traffic signal regulations and running a red light will result in 6 points deducted and corresponding fines. Precautions: The stronger the high beams at night, the less safe the driving. The wider the angle of light irradiation, the safer it is; the higher and brighter the lights are raised, the more dangerous it is. After parking on uneven ground, not only should the handbrake be pulled, but the gear should also be engaged. This is the best way to prevent the vehicle from sliding due to uneven road surfaces. When making sharp turns at high speed, stepping on the clutch while stepping on the brake is the most unsafe. Under any circumstances, driving with the clutch pressed will increase the vehicle's inertia. It is advisable to lower the gear before stepping on the brake to drive. Regarding the timing of yellow lights, it is now stipulated that the minimum duration of a yellow light cannot be less than 3 seconds. The timing of yellow lights should be scientifically set based on the traffic conditions, flow conditions, and safety conditions of the intersection, including how long the red light and green light durations should be, which also need to be limited or adjusted according to the specific conditions of the intersection.
Was this review help?
14
2
Share
CarmenLynn
08/12/25 9:12am
Well, as a seasoned driver with years of experience, I'd like to talk about the penalty points for violating traffic signals. Running a red light or similar violation directly deducts 6 points, which is clearly stated in the traffic rules. With a total of 12 points, losing so many at once is quite harsh. I remember a friend who rushed through a yellow light and it was treated as running a red light, resulting in a 200-yuan fine and points deduction. Once you reach 12 points, your driver's license will be temporarily suspended, and you'll have to attend a week-long course at the DMV and pass an exam to get it back. When driving, traffic lights change quickly at intersections, so it's important to slow down in advance and stay focused—no distractions like looking at your phone. Getting caught by traffic cameras is easy, so I recommend installing a dash cam to have evidence in case of disputes. Safe driving is no joke—stop at red lights, don't rush for that one second, and developing good habits can avoid a lot of trouble. If you do get points deducted, download the 12123 APP to check your score conveniently and handle it promptly—don't delay. The rules are there to protect everyone, so don't treat them lightly.
Was this review help?
19
3
Share
Expand All
More Forum Discussions

How often should vehicle air conditioning refrigerant be replenished?

Automobile coolant should be replenished every two years or after driving 40,000 kilometers. The following is an introduction to coolant: Precautions for antifreeze replacement: Antifreeze coolant can be replaced either at a 4S shop or by yourself. However, drivers should note that engine antifreeze coolant is available at 4S shops or auto parts stores. There are two specifications: ready-to-use and concentrated. The ready-to-use type can be directly poured into the radiator. Functions of antifreeze: It provides anti-corrosion protection for components of the cooling system; prevents scale formation to avoid reducing the radiator's heat dissipation efficiency; ensures the engine operates within the normal temperature range.
5
1
Share

Reverse Light Switch Installation Location?

The reverse light switch is installed on the transmission. When the vehicle is shifted into reverse gear, the reverse light will automatically turn on. More information about reverse lights is as follows: The reverse light switch is located at the gear lever position of the transmission. When the car's gear lever is in the reverse position, it triggers the reverse light to turn on. If the reverse light fails to illuminate, you can first check for issues with the reverse light bulb and wiring, as most reverse light faults occur in these two areas. Reverse lights come in two types: gas and LED. Gas reverse lights use halogen material. Halogen-based reverse lights are mature in technology and low in cost, making them widely used in many vehicle models. However, they also have some drawbacks, such as radiation, mercury content, and fragility, which can cause inconvenience during transportation and installation. The service life is approximately 8,000 hours. LED reverse lights use LED material. LED-based reverse lights are pollution-free, radiation-free, and have a long service life, with a theoretical lifespan of over 50,000 hours. Many vehicle models have now upgraded their reverse lights to LED versions. However, due to their higher cost, LED reverse lights have a significant impact on their adoption.
13
3
Share

What Kind of Driver's License is Needed to Drive a Semi-Trailer?

To drive a semi-trailer, an A2 driver's license is required. Semi-trailers are primarily used to transport large, indivisible cargo such as excavators. Below is more information about semi-trailers: Definition of a Semi-Trailer: A semi-trailer is a trailer where the axle is placed behind the vehicle's center of gravity (when the vehicle is evenly loaded) and is equipped with a coupling device that transmits horizontal and vertical forces to the tractor. Semi-trailers are typically three-axle trailers and come in various types, such as 11-meter warehouse-barrier semi-trailers, 13-meter warehouse-barrier semi-trailers, low-flatbed semi-trailers, etc. They are heavy-duty transport vehicles connected to the semi-tractor via a kingpin. Precautions for Driving a Semi-Trailer: When driving, avoid making large steering wheel movements because the vehicle body is relatively long. Excessive movement can cause rollovers, and extra caution is needed when turning. Always leave ample space to avoid the trailer's tail swinging and potentially hitting people.
17
4
Share

What is the function of the B gear in the Corolla Hybrid?

The B gear in the Corolla Hybrid is the braking gear. However, this braking is not directly applied to the brake pedal but rather involves kinetic energy recovery, utilizing the engine to restrain the vehicle. It is typically used on continuous long downhill sections. In such situations, if you keep pressing the brake while driving downhill in D gear, almost all the braking pressure is borne by the brakes themselves. Prolonged use under these conditions can cause the brake pads to overheat, leading to brake failure. When shifted into B gear, the transmission is locked by a mechanism into low gears (1-2), allowing the vehicle to utilize engine braking in low gear. This relieves most of the pressure on the brakes. Many automatic transmission models are equipped with an L gear, which stands for 'low,' meaning low-speed gear. Driving in low gear maintains a lower gear position, enabling engine braking to reduce the vehicle's speed, thereby extending the transmission's service life. The function of the B gear is similar to that of the L gear. The B gear can also be used for starting on steep slopes, providing high torque at low speeds. The Corolla Hybrid is a hybrid vehicle equipped with a 1.8-liter naturally aspirated engine, delivering a maximum horsepower (Ps) of 98, a maximum power (kW) of 72, and a maximum torque (N·m) of 142. This engine is an Atkinson cycle engine paired with an E-CVT continuously variable transmission. The vehicle's dimensions are 4635mm in length, 1780mm in width, and 1455mm in height, with a wheelbase of 2700mm.
19
3
Share

Can You Find the Owner's Phone Number by Calling 114?

Calling 114 cannot help you find the owner's phone number. The specific reasons and service procedures are as follows: Specific reasons: Since phone numbers are considered personal privacy, 114 cannot provide the owner's phone number. To contact the owner through 114, you need to provide the license plate number to the 114 staff, who will then look up the owner's contact information and connect the call to the owner. Service procedures: The service of finding the owner through 114 is free. You just need to call 118114 and provide your license plate number and contact number to the staff for binding. Others can then contact you by providing your license plate number to 114. To protect the privacy of both parties, neither side can see the other's phone number after the call is connected.
4
1
Share

What was the original name of scaina?

scaina's original name is Scania. Scania is a car manufacturer originating from Sweden, and most of Scania's vehicles are produced in Sweden. The specific introduction is as follows: Scania Truck Categories: All Scania truck products are divided into four basic categories: D (Distribution), C (Construction), L (Long-haul Transport), and G (Heavy Transport). The engine specifications and vehicle purposes of each model can be identified from the number on the front of the vehicle. For example, 164L, 580 indicates that the model is a 4-series long-haul transport vehicle equipped with a 16L displacement 580 horsepower engine. Truck Engine Introduction: Trucks are essential tools for road transportation and are frequently seen in daily life. Most trucks generally use turbocharged diesel engines. Applying turbocharging technology to diesel engines can increase the engine's air intake, thereby improving the efficiency of the diesel engine.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.