How many points will a novice driver be deducted for driving on the highway?

2 Answers
OSimon
07/24/25 8:43am
Novice drivers driving alone on the highway will not be deducted points, but they will be fined and ordered to exit the highway at the nearest exit. Below are the precautions for novice drivers driving on the highway during their probationary period: Prohibition of driving alone on the highway: During the probationary period, drivers operating a motor vehicle on the highway must be accompanied by a driver who has held a driver's license for the corresponding or higher vehicle type for more than three years. The accompanying driver should sit in the front passenger seat to guide the probationary driver. Precautions for driving on the highway: Conduct a thorough inspection before driving, especially checking fluids, tires, lights, and other items. Plan the route in advance. Pay attention to road signs, and if you miss a highway exit, do not panic. Do not attempt to slow down, brake suddenly, or make a U-turn. Instead, maintain your speed and continue driving to find the next exit to return to your original route.
Was this review help?
18
2
Share
GabriellaLynn
08/11/25 4:12am
I've been driving for almost ten years and have encountered many issues with new drivers. If a novice driver during their probationary period drives alone on the highway, they will definitely be penalized, usually with a deduction of 6 points and a fine of 200 yuan. This rule is for safety considerations, as the speed on highways is high, and inexperienced drivers are more prone to accidents. I remember helping a friend last year who had just gotten his license and wanted to drive home. I quickly reminded him to find an experienced driver with at least three years of driving experience to accompany him. Otherwise, accumulating penalties up to 12 points could lead to license suspension or an extension of the probationary period. When driving, I always emphasize that new drivers should practice more on city roads to familiarize themselves with various road conditions. It's safer to drive alone on the highway only after the probationary period ends, as safety is priceless.
Was this review help?
17
0
Share
Expand All
More Forum Discussions

What to Do If the ETC Falls Off?

ETC needs to be reinstalled and reactivated for use after falling off. The installation process for the ETC device is as follows: Upon receiving the device, first check if the ETC card and electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU, and the red light will briefly illuminate. The OLED screen will display "Tag Invalid" or "Please Insert Card," indicating the device is functioning properly. Clean the front windshield to ensure the surface is smooth, clean, and dry. Then peel off the adhesive backing of the OBU and attach it to the installation position. Press firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front facing the driver and the back facing the windshield, ensuring the chip is inserted into the OBU device. Method to activate the ETC device: Insert and remove the ETC card twice consecutively until the electronic tag screen displays "Bluetooth On." If "Tag Invalid" appears when inserting and removing twice without attaching the electronic tag, this is normal and does not affect activation. Alternatively, press the button on top of the electronic tag to enable Bluetooth directly. Turn on your phone's Bluetooth and open the corresponding mobile app (usually a download QR code is provided on the electronic tag), then navigate to the device activation interface. Click "Connect Device" and wait patiently for the "Connection Successful" prompt. Once connected, upload a photo of the vehicle's front to complete activation.
16
3
Share

What vehicles can an A1 driver's license drive?

A1 driver's license can drive buses carrying more than 20 passengers and passenger vehicles with body length exceeding 6 meters. Here are relevant details: 1. Other vehicle types permitted by A1 license include: A3 (city buses), B1 (medium-sized buses), B2 (large trucks), C1 (small cars), C2 (small automatic transmission cars), C3 (low-speed trucks), C4 (three-wheeled vehicles), M (wheeled self-propelled machinery). 2. After obtaining an A1 license, if any of the following situations occur: accumulating 12 penalty points in a scoring cycle, failing annual review for three consecutive scoring cycles, causing a fatal drunk driving accident with primary responsibility, the license grade will be downgraded.
7
4
Share

How Often Should a Car Be Serviced for Optimal Maintenance?

It is best to service your car every six months. Here are the relevant details: 1. Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of a vehicle, also known as car servicing. Due to different maintenance methods, the maintenance processes also vary. Maintenance methods are categorized into fixed-position operation and assembly-line operation. 2. Modern car maintenance primarily includes servicing the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, among others. 3. The purpose of car maintenance is to keep the vehicle clean, ensure normal technical conditions, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the service life.
1
4
Share

Which district in Tianjin does the license plate starting with Jin F belong to?

License plates starting with Jin F are not district-specific. The letters on the license plate represent the prefecture-level city code where the vehicle is registered, generally assigned by the provincial vehicle management office based on the status of each prefecture-level city, with A being the provincial capital and B the second-largest city. Jin F is the license plate for Tianjin City (Jin F) in Tianjin Province. If you need to handle services such as license plate registration, annual inspections, or traffic violation processing, you can visit the Tianjin (Jin F) Vehicle Management Office. Below is some relevant information: 1. The license plate number is the identification number of the vehicle, just like an ID number for a person. For cars, the license plate number has a two-row structure, with the upper row being the vehicle registration authority code and the lower row being the license plate number. For motorcycles, the license plate number has a left-right structure, with the left side being the vehicle registration authority code and the right side being the license plate number. 2. The currently used 92-style vehicle license plates consist of a Chinese character and an English letter representing the issuing authority code, followed by a five-digit number. For example, "Su A-12345"—"Su" represents Jiangsu Province, and A is the issuing code of the Nanjing Public Security Bureau Vehicle Management Office, indicating that the license plate was issued by the Nanjing Public Security Bureau Vehicle Management Office. The following five digits are the serial number.
5
0
Share

Does a Car Get Affected If Left Unused for a Long Time?

When a vehicle is left unused for an extended period, components such as the battery, engine oil, lubricants, braking system, and electronic parts may experience varying degrees of aging and damage. Here are some relevant details: 1. Before reuse, it is advisable to thoroughly inspect and replace the "five oils and three fluids," including the battery, engine oil, and coolant. Additionally, the tire pressure of all four tires must be checked, and if severe tire aging is detected, all four tires should be replaced promptly. 2. For vehicles parked for long durations, covering them with a car cover can prevent dust accumulation. Moreover, choosing the right parking location is crucial—avoid parking under trees, in direct sunlight, low-lying areas, or underground parking lots with poor drainage. If possible, opt for an above-ground indoor parking facility. Ideally, start the vehicle at least once a week and drive it for more than 10 kilometers each time, as this is the best way to prevent aging.
15
0
Share

How to Check Engine Oil Level Using the Dipstick?

Park the vehicle on level ground and wait until the engine cools down. Remove the oil dipstick, wipe it clean with a soft cloth, reinsert it fully, then remove it again to check. If the oil mark is below the MIN line, it indicates low oil level; if between MIN and MAX, the oil level is appropriate; if above MAX, there's excessive oil. Here are relevant details: 1. Always check when the engine is cold, as cold measurements are more accurate than hot ones. Temperature affects oil viscosity - high oil temperature may yield false readings. 2. The dipstick must be fully inserted; partial insertion won't provide accurate oil level information. Parking on level ground and waiting for cooling is necessary because most engines use splash lubrication. Only after the engine stops and oil fully drains back to the oil pan while maintaining level can the dipstick show precise oil quantity. 3. Engine oil is as vital to a car as blood is to the human body. Beyond lubricating the engine, it performs cleaning, cooling, sealing, and anti-wear functions. Regular oil checks are absolutely beneficial, especially for models prone to oil consumption issues where more frequent monitoring is essential.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.