···
Log in / Register

How Many Points Deducted and Fine Amount for Occupying Dedicated Lanes?

4 Answers
StRicardo
07/30/25 12:05am
Illegally occupying a bus lane will result in a 3-point deduction and a fine of 200 yuan. Occupying Lanes: Bus lanes are monitored by front cameras, traffic electronic cameras, or public reports. Any submitted violation images can serve as evidence for penalties for illegal occupation of bus lanes. After a violation, you will receive a penalty notification via SMS. You can handle the penalty at the traffic police department, pay the fine at a bank, or process it online. Additional Information: Bus-only lanes, scientifically referred to as public transport dedicated lanes, are independent right-of-way lanes specifically designated for buses, serving as supporting infrastructure for urban transportation network construction. The primary function of bus-only lanes is to facilitate the bus network in addressing road congestion issues caused by various peak hours and unexpected situations.
Was this review help?
8
1
Share
LeDerek
08/16/25 3:57am
As a veteran driver with over 20 years of experience, I know these traffic rules inside out. Occupying dedicated lanes, such as bus lanes or emergency lanes, usually results in a 3-point deduction and a fine of 200 RMB. These are real penalties, not just scare tactics. I recall helping a friend deal with a similar ticket a decade ago—he took the emergency lane to save time and ended up with a 400 RMB fine plus points (back then, penalties were harsher), nearly delaying an emergency response. Dedicated lanes are designed for specific vehicles to ensure smooth and safe urban traffic. Misusing them not only harms the individual but also disrupts public order. So, always pay attention to roadside signs and electronic warnings while driving, and develop good habits to avoid regrets. With surveillance cameras everywhere these days, you might dodge it once, but not forever.
Was this review help?
17
5
Share
Expand All
DelGrace
10/19/25 5:50am
I just got my driver's license not long ago, and I still remember my instructor repeatedly warning me not to touch the dedicated lanes. Occupying them usually results in a 3-point deduction and a fine of 200 yuan, which is really tough for a budget-conscious young person like me. Last month during rush hour, I encountered a situation where the bus lane was empty and I was tempted to enter, but I held back—otherwise, getting caught by an electronic eye would have been disastrous. My friend Xiao Li got caught last week when he occupied a temporary dedicated lane in Beijing, and the ticket was immediately notified via text message. Dedicated lanes include various types such as bus and taxi lanes, mainly aimed at avoiding traffic jams and improving efficiency. It's advisable for new drivers to install a navigation app for reminders, stay focused at all times, and not risk trouble just to save a few seconds. After all, accumulating too many points and fines can affect future license renewals—it's simply not worth it.
Was this review help?
3
5
Share
Expand All
MacBlakely
12/02/25 6:25am
Occupying dedicated lanes is a serious violation of traffic rules, punishable by a 3-point deduction and a 200-yuan fine according to law. As an ordinary citizen concerned about traffic safety, I believe this is not just about money but poses a threat to public safety. For instance, blocking ambulance or fire lanes could lead to life-threatening situations. I regularly participate in community traffic awareness campaigns, often reminding neighbors about such hazards. Penalties are largely standardized across cities, starting from 200 yuan, with heavier fines in some busy areas. Remembering the rules is not only a responsibility but also protects everyone. Developing the habit of paying attention to road signs can help avoid unintentional violations and potential accidents.
Was this review help?
20
3
Share
Expand All
More Forum Discussions

Where to Check the Battery Level of a Prado?

Toyota Prado does not allow viewing of the battery level. The battery is an essential part of the vehicle, which can be divided into traditional lead-acid batteries and maintenance-free batteries. It has advantages such as no need to add any liquid, easy connection to terminals, and long power storage time. The following are the functions of the battery: 1. When starting the engine, it provides a strong starting current (about 10A) to the starter. 2. When the generator is overloaded, it can assist the generator in supplying power to electrical devices. 3. When the engine is idling, it supplies power to electrical devices. 4. The battery also acts as a large-capacity capacitor, protecting the vehicle's electrical appliances. 5. When the generator's terminal voltage is higher than the electromotive force of the lead battery, it converts part of the electrical energy into chemical energy for storage, which is charging.
12
2
Share

What Causes Car Shaking After Ignition?

Car shaking after ignition can be caused by: 1. Low ignition energy; 2. Poor fuel atomization at low temperatures; 3. Fuel requiring higher ignition energy; 4. Increased spark plug gap due to prolonged vehicle use; 5. Severe engine carbon buildup; 6. Poor performance of the ignition system or weak spark plug firing; 7. Unstable fuel pressure. Solutions for car shaking after ignition: 1. If disassembling the intake tract for cleaning is not feasible, use a no-disassembly fuel system cleaning device, though the effect may not be as ideal as disassembly; 2. Consider replacing the spark plugs, or clean them and adjust the gap if possible for continued use.
4
4
Share

Can You Drive with 0.4 Tire Pressure?

Tire pressure at 0.4 bar is too low to drive. Modern vehicles are equipped with tire pressure monitoring systems, which typically alert when the tire pressure drops below 1.5 bar. It is advised not to go below this value, as excessively low tire pressure can lead to severe consequences, including tire blowouts, which pose significant risks. Hazards of Low Tire Pressure: Increased friction with the road surface, leading to higher fuel consumption; Heavier steering wheel and tendency to veer, compromising driving safety; Excessive movement of tire components, causing abnormal heat due to over-compression; Reduced functionality of the tire's cords and rubber, leading to delamination or cord breakage, excessive friction with the rim, and damage to the bead area, resulting in abnormal wear; Dramatically increased friction with the ground, causing rapid temperature rise, softening of the tire, and a sharp decrease in strength. High-speed driving under such conditions may result in a blowout; Increased deformation of the tire body, leading to cracks on the sidewalls, excessive flexing, overheating, accelerated rubber aging, fatigue of the cord layers, cord breakage, and increased contact area with the ground, speeding up wear on the tire shoulders.
9
4
Share

What is the starting current of a sedan?

When starting, the maximum instantaneous current of a car battery can exceed 300A, and the car requires 300 to 500 amperes of current at the moment of starting. Below is an introduction to the principle of starting current: 1. Motor starting: At the instant the motor is powered on, when the motor is in a stationary state, the rotor is motionless, and the rotor speed is 0. The synchronous rotating magnetic field cuts the rotor winding at the maximum speed, inducing the highest electromotive force in the rotor winding and generating a large current in the rotor winding. This current will counteract the magnetic flux of the stator field. To maintain the original magnetic flux compatible with the power supply voltage, the stator winding will automatically increase the current. Because the rotor current is very large at this time, the stator current of the motor will also increase significantly, up to 5 to 7 times the rated current. This is the reason why the motor has a large starting current. 2. Starting current: The starting current (CCA) index refers to the minimum current obtainable under specific conditions at -17.8°C and -28.9°C. This index links the starting capability of the battery with important variables such as engine displacement, compression ratio, temperature, starting time, the technical state of the engine and electrical system, and the minimum operating voltage for starting and ignition.
15
5
Share

How to Replace the License Plate Light on a Camry?

Here are the steps to replace the license plate light on a Camry: 1. First, prepare a new license plate light and a flat-head screwdriver. Use the screwdriver to pry one end of the license light socket. If it doesn't budge, try prying the other end. Then remove the old bulb and install the new license plate light to complete the replacement. 2. The car license plate light is turned on at night or in low-light conditions along with the position lights to illuminate the license plate. It is generally used to assist police in nighttime tracking and surveillance operations. 3. The installation of car license plate lights is very simple. The screw-shaped bulb is installed above the rear license plate, serving both illumination and decorative purposes.
2
4
Share

Do Tires Have a Right and Wrong Side?

The distinction between the right and wrong sides of a tire is primarily determined by the tire tread pattern. If the tire has an asymmetric tread or is a unidirectional tire, then it will have a right and wrong side. However, if the tread is symmetrical, the tire does not have a right or wrong side. Precautions for tire installation are as follows: 1. When installing the tire, strictly follow the specified installation direction. Failure to do so will not only affect the tire's drainage performance but also interfere with its noise reduction and grip. In severe cases, it may even cause the vehicle to pull to one side or become unstable, posing a safety hazard. 2. After installing the tire, perform a safety test before driving.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.