How many points are deducted for the car body touching the edge line during parallel parking?

2 Answers
LaDominic
07/25/25 4:13pm
10 points are deducted for the car body touching the edge line during parallel parking. Below are the deduction criteria and techniques for parallel parking: Parallel parking deduction criteria: The task completion time must not exceed 90 seconds; exceeding the specified time results in disqualification; touching the parking space boundary line with the car body during movement deducts 10 points each time; failing to use or incorrectly using the turn signal when exiting the space deducts 10 points; stopping midway deducts 5 points each time. Parallel parking techniques: Ensure the car body is about 30 centimeters from the edge line of the parallel parking space and drive parallel past the space; move the vehicle forward, observe the right rearview mirror, and stop when the A corner of the space appears in the mirror; press the clutch, shift into reverse gear, and slowly back up; watch the right rearview mirror, and when the A corner disappears, turn the steering wheel fully to the right.
Was this review help?
3
4
Share
VanMadison
08/11/25 9:45pm
When teaching beginners to drive, I always remind them not to touch the edge line during parallel parking—hitting it means an instant 100-point deduction and failing the entire test. Last time at the training ground, a nervous guy turned the wheel too fast, scraping the white line, and the examiner immediately called it a failure. The reason is simple: touching the edge line indicates the vehicle has crossed boundaries, which could mean scraping pedestrians or damaging wheels in real-world narrow-road scenarios. The strict rules exist for safety—harsh penalties but necessary. Practice using rearview mirrors to maintain about 30 cm of distance, go slow, and stay calm. Simulate often, don’t fear mistakes. Safe driving habits matter most—the test is just the start; real driving tests patience and technical details. More practice means fewer errors. Remember, every session builds experience.
Was this review help?
11
1
Share
Expand All
More Forum Discussions

What to Do When a Roewe Car Door Won't Open?

Go to an auto parts market to replace the door lock cable. Replace the door hinges and lock post. Replace the door stopper with a new one. Park the vehicle in sunlight or use a heat lamp to warm the stuck door.
7
0
Share

How to Use the Auto-Folding Function of the Besturn T77 Rearview Mirror?

First, press the vehicle's one-touch start button to power on the vehicle; otherwise, the function cannot be activated. Then, locate the window control buttons on the right side of the vehicle's armrest. By rotating the rearview mirror knob, you can adjust the rearview mirror. Turn the rearview mirror knob to the button position, and the rearview mirror will automatically fold.
9
0
Share

What is the optimal speed to use the S gear?

Automatic transmission's S gear is actually short for Sport gear, which is a sport mode that emphasizes power output. Due to its strong power, the S gear is generally used when overtaking or climbing hills. After completing the action, it is switched back to the more economical D gear, as from a fuel consumption perspective, the S gear mode consumes more fuel than the normal mode due to increased fuel injection at high RPMs. Below is an introduction to automatic transmission gears and usage precautions: 1. P gear: Parking gear. When the vehicle is completely stationary, press the unlock button at the front of the shift lever to engage the P gear. 2. R gear: Reverse gear. When the vehicle is completely stationary, press the brake pedal, press the unlock button at the front of the shift lever, engage the R gear, and after releasing the brake pedal, slowly press the accelerator to move the vehicle backward. 3. N gear: Neutral gear. The shift lever can be directly moved from R or D gear to N gear. When moving the shift lever out of N gear, the brake pedal must be pressed. 4. D gear: Drive gear. The shift lever can be directly moved from N gear to D gear. This gear is generally used when the vehicle is moving forward, and the system will automatically shift gears based on engine load and vehicle speed.
3
3
Share

Which provinces and cities are piloting ethanol gasoline?

Regions in China using ethanol gasoline include: 1. Heilongjiang, Jilin, Liaoning, Henan, Anhui, and Guangxi provinces; 2. Bayannur City, Wuhai City, and 6 cities in Jiangsu Province (Xuzhou, Lianyungang, Huaian, Yancheng, Suqian); 3. 7 cities in Shandong Province (Jinan, Zaozhuang, Jining, Tai'an, Linyi, Liaocheng, Heze); 4. 9 cities in Hubei Province (Wuhan, Xiangfan, Jingmen, Suizhou, Xiaogan, Shiyan, Yichang, Huangshi, Ezhou); 5. 6 regions in Hebei Province (Shijiazhuang, Baoding, Xingtai, Handan, Cangzhou, Hengshui). 6. Among these, Liaoning, Jilin, Heilongjiang, Henan, Anhui, and Guangxi provinces implement "full-closed" promotion, where all gas stations in principle must provide ethanol gasoline exclusively without mixing regular gasoline; while Jiangsu, Hubei, Hebei, Shandong, and Guangdong provinces adopt "semi-closed" promotion, with some gas stations offering both regular gasoline and ethanol gasoline.
7
5
Share

What is the function of the Jetta sensor?

Jetta sensors play a role in detecting vehicle conditions. The working principle of Jetta vehicle sensors is to convert various operating condition information during vehicle operation, such as speed, temperature of various media, engine operating conditions, etc., into electrical signals and transmit them to the computer, so that the engine can be in the optimal working state. The detection method of the camshaft position sensor is as follows: 1. Unplug the connector, turn the key to the second gear, and use a voltmeter to measure and confirm that the power line has voltage output; 2. Use the meter to determine the ground wire, connect one probe of the voltmeter to the confirmed power line, and connect the other probe to the other two wires to measure the one with voltage as the ground wire, and the remaining one is the signal wire; 3. At this time, turn off the key to lead out the signal wire, plug back the connector to start the engine, and measure the signal wire and the ground wire to see if there is a signal voltage output. The output voltage should be less than the supply voltage. If not, the sensor is damaged; 4. At the same time as the above steps, check whether the signal teeth on the camshaft are in good condition, whether there is any debris between the camshaft sensor and the signal teeth, and whether the gap is normal.
14
2
Share

How to Find Reference Points for Reverse Parking?

First method: Align the left rearview mirror with the right starting line. Second method: Align the angle between the right rear window center pillar and the garage entrance line. When the vehicle body is straight and centered in the garage, it indicates that right-side parking is about to be completed, and the stopping point is the second reference point.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.