···
Log in / Register

How many points are deducted for the body sweeping the line during parallel parking?

5 Answers
KayleeLee
07/24/25 9:34pm
Parallel parking body sweeping the line deducts 100 points. Parallel parking test standards: After the vehicle is parked in the garage, if the body crosses the line, 100 points are deducted. If the wheels touch or press the lane boundary line while driving, 10 points are deducted. If the vehicle is not parked inside the garage, 100 points are deducted. If the left turn signal is not turned on when starting, 10 points are deducted. If the vehicle stops midway, 100 points are deducted. The following are the key points for driving school practice: 1. Strive for more practice: Some people learn to drive in a sporadic manner, not consistently, which is definitely not good. They should strive for more practice time. 2. Remember technical actions: Firmly remember the technical actions taught by the coach. These so-called actions are actually tricks, and mastering them is very useful. 3. Seek advice from experienced drivers: Seek more advice from people around you who are more skilled at driving to deepen your understanding. Only with thorough understanding can you drive well. 4. Strictly follow the norms: When learning to drive, what the coach teaches may be different from what people usually say. Generally, learning to drive is more dogmatic, but you must strictly adhere to it. 5. Use your brain and think more: If some actions are not done well at first, there is still a chance to remedy them. Therefore, you should use your brain more and think about why it happened to make better progress.
Was this review help?
2
5
Share
VonAdam
08/10/25 9:48am
I remember when I took the driving test last year, lightly brushing the line during parallel parking cost me 10 points right away, which made me super nervous. Fortunately, with a total score of 100 and a passing mark of 80, I barely scraped by. Brushing the line means the car body slightly touches the ground's yellow line - completely crossing it is even worse, resulting in a 100-point deduction and instant failure. During practice, I often neglected adjusting the rearview mirrors, causing the car to drift. The instructor always emphasized keeping an eye on the mirrors, maintaining distance, controlling speed, and reversing slowly. Practicing more to get familiar with the car's dimensions can reduce mistakes. Under exam pressure, paying extra attention to details is crucial - don't underestimate those 10 points, as they can quickly add up and become dangerous.
Was this review help?
9
4
Share
Expand All
VanAndrew
09/26/25 5:36am
When helping others review for the driving test, I often remind them that brushing the line during parallel parking usually deducts 10 points—it's not a big deal but shouldn't happen too often. During the test, only touching the line without fully crossing it incurs this minor penalty, aiming to cultivate precise control habits. Focus more on steering timing and rear wheel positioning during practice; reversing too quickly increases line-contact risks. Simulate the scenario by marking lines in an open area and practicing a few times to build familiarity—stay calm during the exam to minimize mistakes. This rule prioritizes safety, accounting for limited road space to prevent accidents.
Was this review help?
12
2
Share
Expand All
AshleyAnn
11/09/25 7:38am
That day during my driving test for Subject 2, I got 10 points deducted for touching the line, which made my heart race. The examiner said it was a minor mistake but warned me not to repeat it. This kind of error usually stems from poor distance judgment or unadjusted rearview mirrors. Later, I practiced slow reversing and steering control repeatedly in an open area until I got it right. Remember, accumulating 10-point deductions for touching the line during the test could lead to failure, so make it a habit to check your surroundings thoroughly before parking.
Was this review help?
4
0
Share
Expand All
Ariana
11/09/25 7:40am
Thinking back to when I first learned to parallel park, I always grazed the lines. The instructor said it would deduct 10 points and warned me not to rush. Later, I improved by paying more attention to the rearview mirror and wheel distance. The test rules penalize lightly touching the line with point deductions, but overall it's salvageable. Going over time or crossing the line results in stricter penalties of 50 points or more. Related techniques include estimating the parking space size in advance and slowing down the pace, which can avoid unnecessary losses.
Was this review help?
19
0
Share
Expand All
More Forum Discussions

Is the new small sedan exempt from inspection for six years?

New small sedans are exempt from inspection for six years. Additional information is as follows: 1. Small sedans are exempt from inspection for the first six years: This means that within six years, there is no need for an on-site inspection. This policy only applies to private passenger vehicles with 5 seats or fewer. 2. Collect the annual inspection sticker every two years during the exemption period: Every two years, the vehicle owner must personally go to the vehicle management office to collect the annual inspection sticker. Bring your ID card, vehicle registration certificate, and valid compulsory traffic insurance policy to apply for a new annual inspection sticker. Starting from the seventh year, an annual on-site inspection is required, and the annual inspection sticker must be collected every year. 3. Scope of vehicles "exempt from inspection for six years": 1. The scope of exempt vehicles includes non-commercial sedans (including large sedans) registered within six years, other small and mini passenger vehicles, and motorcycles. 2. Excluded are vans and vehicles with more than 9 seats (>9 seats).
3
1
Share

Is the Driving Resistance Greater or Smaller on Downhill Sections?

Driving resistance on downhill sections is smaller compared to flat sections. On downhill sections, due to the effect of gravity, the driving resistance is reduced, making it easier for the vehicle to speed up and harder to control compared to driving on flat terrain. Increased driving resistance manifests as insufficient power during driving, a mismatch between speed and gear, increased fuel consumption, and poorer coasting performance when the vehicle is in neutral on straight roads. Reasons for increased driving resistance include: 1. Faults in the vehicle's transmission system: Poor lubrication, insufficient, deteriorated, or overly viscous lubricants in the drive axle's main reducer, differential, or transmission can increase driving resistance; improper assembly or adjustment of the drive axle's main reducer and transmission, overly tight bearing assembly, improper driveshaft assembly, overly tight or poorly lubricated universal joint bearings, or lack of oil; excessively small gear meshing clearance in the transmission increases transmission resistance, deformation of the drive axle housing, bending deformation of the half-shaft, and friction between the half-shaft and the half-shaft sleeve can all contribute to increased driving resistance. 2. Faults in the vehicle's driving system: Deformation or displacement of the front axle or drive axle can increase driving resistance; poor lubrication, deteriorated or insufficient lubricants in the wheel hub bearings, insufficient tire pressure, and deformation of the vehicle frame can all lead to increased driving resistance. 3. Overloading the vehicle, poor road conditions, and driving against the wind can also cause increased driving resistance.
3
5
Share

What does ST on tires stand for?

Tire ST refers to trailer tires. Additional information: 1. Trailer tires do not refer to truck trailers, but rather to the practice in European and American countries where private cars often tow an additional vehicle for transporting goods or travel purposes. The ST designation before the tire indicates this type of tire. ST can be considered as an abbreviation for sport-trailer. 2. Pneumatic tires can be further divided into two types based on their construction: tube tires and tubeless tires. Passenger cars commonly use tubeless tires. Based on the arrangement of internal cord layers and cushion layers, tires can also be classified as radial tires or bias-ply tires. Radial tires are widely used in automobiles. 3. Automotive tires can be categorized into pneumatic tires and solid tires based on their carcass structure. Modern vehicles predominantly use pneumatic tires. According to internal air pressure levels, pneumatic tires can be divided into three types: high-pressure tires, low-pressure tires, and ultra-low-pressure tires. Low-pressure tires are commonly used in various vehicles. Pneumatic tires can also be classified into tube tires and tubeless tires based on their construction.
13
3
Share

How to Handle 6 Points Deducted from Driver's License?

If 6 points are deducted from your driver's license, the handling methods are as follows: 1. Offline: If the ticket or penalty decision is issued by the traffic police on the spot, you can directly pay the fine at the designated bank specified on the penalty notice. Note: Be sure to handle the violation within the specified time, usually within fifteen days after receiving the notice, otherwise late fees may apply. 2. Online: Log in to the comprehensive traffic safety service management platform, select the traffic violation handling service, and pay the fine. Note: If a driver finds a record of traffic violations, it should be handled promptly. Otherwise, if multiple violations are not handled in time, the traffic department may legally revoke the license or impound the vehicle.
11
4
Share

What Are the Types of Automotive Batteries?

Nowadays, automotive starting batteries generally include the following types: Dry-charged Lead-Acid Battery: This type is called a dry battery because it is completely dry without electrolyte when it leaves the factory. Since it requires the addition of electrolyte for use, it is commonly known as a water battery. Its advantage is that the negative plate has a high capacity for storing electricity, and it can retain the stored charge for up to two years in a completely dry state, making it very convenient for storage and transportation. To use it, you only need to add electrolyte and wait for 20-30 minutes before it is ready. It is also relatively cheaper. The downside is that it requires regular maintenance and the addition of electrolyte, which can be quite troublesome for the average consumer. Currently, it is mainly used in trucks and buses. Valve-Regulated Sealed Lead-Acid Battery: Also known as a maintenance-free battery. As the name suggests, this battery does not require any liquid maintenance from the time it leaves the factory until it is scrapped. The advantages are obvious: first, it is maintenance-free; second, it is resistant to vibration, high temperatures, compact in size, and has low self-discharge. It generally also has a longer lifespan. The drawback is that it is relatively more expensive. Currently, almost all passenger cars use this type of battery. With the price gap of maintenance-free batteries narrowing in recent years, more and more buses and trucks are also starting to use maintenance-free batteries. Lithium-Ion Battery: The advantages of lithium batteries are their small size and light weight. The disadvantages are their high cost and relatively lower safety. Due to these characteristics, they are mainly used in high-performance cars and sports cars.
4
2
Share

What does it feel like when the car's ABS intervenes?

When the ABS intervenes during braking, there will be a rattling sound and a sense of jerkiness. Here are some related details about ABS: 1. Function: The Anti-lock Braking System (ABS) automatically controls the braking force during car braking to prevent the wheels from locking up, keeping them in a state of rolling and sliding (with a slip ratio of about 20%) to ensure maximum adhesion between the wheels and the road. 2. Working Principle: During braking, ABS quickly determines the locking state of each wheel based on the speed signals from the wheel speed sensors. It closes the normally open input solenoid valve for the wheel that is starting to lock, maintaining the braking force. If the wheel continues to lock, it opens the normally closed output solenoid valve, causing the braking pressure on that wheel to drop rapidly due to the direct connection to the brake fluid reservoir, preventing the wheel from completely locking up due to excessive braking force.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.