···
Log in / Register

How many points are deducted for stopping midway during the reverse parking in Subject 2?

3 Answers
LeSawyer
07/29/25 8:56pm
Stopping midway during the reverse parking in Subject 2 deducts 5 points. General point deductions: Not wearing a seatbelt, not closing the car door properly, and not having the gear in neutral when starting the engine all deduct 100 points. Not using the turn signal, using the turn signal for less than three seconds, forgetting to turn off the turn signal, or using the turn signal incorrectly, as well as stalling the engine, all deduct 10 points each. Parallel parking: If the vehicle's body crosses the line after stopping in the parking space, or if the task completion time exceeds 90 seconds, 100 points are deducted. Not using or incorrectly using the turn signal when exiting the parking space deducts 100 points. If the vehicle body touches the parking space line or the wheels touch the lane boundary line while moving, 10 points are deducted each time. Stopping for more than 2 seconds midway deducts 5 points each time. Reverse parking: If the task completion time exceeds 210 seconds, not following the prescribed route or sequence, not driving the front wheels over the control line before reversing, or failing to complete the parking all deduct 100 points. Stopping for more than 2 seconds midway deducts 5 points each time.
Was this review help?
9
4
Share
StMaggie
08/15/25 6:45pm
I remember when I was taking the driving test for Subject 2, stopping midway during reverse parking would directly deduct 100 points. That time during the test, I was so nervous that my hands were shaking, and I paused for a few seconds while reversing. The examiner immediately called it off, saying I lost all points and the test was over. Later, when I talked to my instructor about it, he said reverse parking should be done in one smooth motion. Stopping indicates you didn’t control the speed and clutch properly, which could easily be judged as an operational error. To avoid this, I suggest practicing more with the training car to simulate test scenarios, keeping slow and steady movement. During the test, stay relaxed, focus on the rearview mirror, and don’t get distracted by other factors. In short, stopping midway is a big no-no—practice more to avoid repeating the same mistake.
Was this review help?
7
5
Share
Expand All
SanEmersyn
10/16/25 7:32am
Stopping midway during reverse parking is a critical error that results in a 100-point deduction in the Subject 2 driving test. I took the test once, initially feeling very confident, but when I stopped to adjust my direction on a small slope, I was immediately penalized with full points deduction and failed. The examiner explained that the test rules require continuous movement, and any pause would affect the scoring criteria. This incident reminded me to familiarize myself with the test environment beforehand, such as checking if there are uneven surfaces on either side of the garage that might cause a stop. It's advisable to practice with friends and supervise each other to avoid pressing the brake or stopping midway. In case of any mishaps during the test, stay calm, readjust your mindset, and continue. Overall, mastering the clutch semi-engaged state can help prevent stopping errors.
Was this review help?
6
0
Share
Expand All
More Forum Discussions

What does it mean when the ABS light is on in a Jetta?

When the ABS light is on in a Jetta, it indicates a fault in the vehicle's ABS system. The specific issue can be diagnosed by using a diagnostic tool to read the fault codes from the ABS system, followed by troubleshooting based on those codes. Taking the 2020 Jetta VS5 as an example, its body dimensions are: length 4419mm, width 1841mm, height 1616mm, with a wheelbase of 2630mm, a fuel tank capacity of 51 liters, and a trunk capacity of 482 liters. The 2020 Jetta VS5 features a front McPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 1.4L inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 150PS, a maximum power of 110kW, and a maximum torque of 250Nm, paired with a 6-speed automatic transmission.
2
3
Share

Where is the fuel injector located in a sedan?

The fuel injector in a sedan is located on the intake manifold or cylinder head. The fuel injector is a component of the gasoline engine's electronic control system, replacing the carburetor in carbureted gasoline engines. The working principle of fuel injection is as follows: the fuel pump supplies high-pressure fuel to the injector's inlet, creating high pressure inside the injector body that acts on the injector's conical surface. When the fuel pressure exceeds the set value, the injector valve opens, and high-pressure fuel is sprayed from the small nozzle holes in a mist form into the engine cylinder for combustion, driving the piston's reciprocating motion. Symptoms of a faulty fuel injector include: 1. Abnormal vehicle vibration; 2. Excessive vehicle emissions; 3. Black smoke from the exhaust pipe; 4. Lack of power during acceleration; 5. Accelerated wear of piston rings.
11
1
Share

What is the purpose of shifting gears?

Shifting gears is to make the car move. The following is a related introduction about vehicle gear shifting: 1. Precautions: When downshifting, the method of double-clutching plus one blip of the throttle should be used. The principle of downshifting with a throttle blip is: the faster the speed, the larger the "throttle blip"; the slower the speed, the smaller the "throttle blip"; the lower the engine speed, the larger the "throttle blip"; the higher the engine speed, the smaller the "throttle blip"; on flat roads, the "throttle blip" is larger, while uphill, the "throttle blip" is smaller. 2. Techniques: Gear shifting should be timely, correct, smooth, and quick. When starting the car, generally use the low gear (first gear). After starting, as long as road conditions permit, shift up to higher gears promptly and progressively.
12
4
Share

What items are replaced during a car's first maintenance?

During a car's first maintenance, the engine oil, oil filter, transmission fluid, and rear axle oil are replaced. The first maintenance must be performed within 5,000 kilometers or six months of driving, whichever comes first. The purpose of the first maintenance is: 1. To ensure the vehicle's optimal performance; 2. To improve driving safety; 3. To reduce engine noise; 4. To extend the vehicle's lifespan. Other items included in the first maintenance are: 1. Replacing engine oil, oil filter, and cleaning the air filter, as well as checking the generator belt and wiper blades for damage; 2. Checking the levels of various fluids to ensure they are normal; 3. Checking tire pressure and inspecting tires for uneven wear, bulges, or damage; 4. Inspecting the car's chassis, including brake pads, brake discs, connecting rods, ball joints, and CV joints for scratches; 5. Checking all switches and lights to ensure they are functioning properly.
14
5
Share

How to Claim Compensation from a 4S Store for a New Car Battery Drain?

In the case of a new car battery drain, the first step is to drive to a 4S store where professional maintenance technicians can determine the cause of the battery drain. The reasons could be due to electrical devices not being turned off during parking, a leakage in the car body, or a quality issue with the battery itself. If it's due to a leakage in the car body or a quality issue with the battery, the 4S store can provide free repair or replacement according to the car warranty policy. The specific reasons for car battery drain are as follows: 1. Unclosed electrical devices after locking the car: For example, lights such as high beams, low beams, automatic headlights, or small lights left on can cause battery drain. 2. Related to installed equipment: Such as audio systems, dash cams, headlights, etc., which can also drain the small battery. 3. Parking in an underground garage: Weak mobile phone signals in underground garages can cause the car's internet connection function to continuously search for a network, consuming power, while the mobile app in the background cannot detect the car's information.
1
3
Share

How to Drive an Audi A6 Automatic Transmission Car?

The method to drive an Audi A6 automatic transmission car is: 1. When starting the ignition, place the gear in P or N position; 2. Press the brake and start the ignition; 3. Shift to D gear, gently release the brake and slowly press the accelerator to drive normally. Taking the 2020 Audi A6 as an example, it belongs to the mid-to-large-sized car category, with body dimensions of: length 5038mm, width 1886mm, height 1475mm, and a wheelbase of 3024mm. The 2020 Audi A6 features a five-link independent suspension in the front and a five-link independent suspension in the rear. It is equipped with a 2.0L turbocharged engine, with a maximum horsepower of 190PS, maximum power of 140kW, maximum torque of 320Nm, and is paired with a 7-speed dual-clutch transmission.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.