How many points are deducted for stopping at a red light but reversing?

1 Answers
DelClayton
07/29/25 1:26pm
Motor vehicles are not allowed to reverse at railway crossings, intersections, one-way roads, bridges, sharp curves, steep slopes, or in tunnels. If reversing is performed in violation of regulations, a warning or a fine ranging from 20 to 200 yuan may be imposed. Originally, stopping without moving would be considered illegal parking against marked lines, resulting in a 2-point deduction, not treated as running a red light. However, reversing triggers the red light camera three times and constitutes illegal reversing. Although it doesn't count as running a red light, it is still a violation. Red light violation notification timeline: If you check at the vehicle management office or traffic police station, you can usually get the results the next day. For online inquiries, it may take 3-7 days to see the results. If waiting for an SMS notification, it generally arrives within 10 days. How to check for red light violations: Common methods include: Checking through the "Traffic Management 12123" app. After opening the app, log in with your ID card, find the "Violation Handling" option, and click on it. Under violation handling, you can see the current status of your vehicle. If there are any violations, the specific details will be displayed. Visiting the service halls of traffic police branches in various districts and counties to check via touch-screen terminals. Logging into the public service websites of municipal public security traffic management bureaus: Find the "Vehicle Violation Inquiry" section, enter your license plate number and engine number, then click "Query."
Was this review help?
19
2
Share
More Forum Discussions

What is the battery capacity of the BYD Qin?

The battery capacity of the BYD Qin is 13kWh. The battery type used in the BYD Qin is BYD's lithium iron phosphate battery. The total voltage is 500V, with an energy capacity of 13kWh. The single-cell voltage of the lithium iron phosphate battery is 3.2V, and the battery system adopts a parallel connection method. In terms of the powertrain, the fuel version of the BYD Qin is equipped with a 1.5L engine paired with a CVT transmission, delivering a maximum power of 80kW (109Ps) at 5800rpm and a maximum torque of 148Nm at 4800rpm. The EV model features an electric motor with a maximum power of 100kW (136Ps) and a maximum torque of 180Nm, offering an NEDC range of 421km. It can accelerate from 0 to 50km/h in just 4.5 seconds. The EV model supports 50kW fast charging, with a full charge taking only 1.5 hours, and can charge from 30% to 80% in just 30 minutes. BYD Company Limited, founded in 1995, was listed on the Hong Kong Stock Exchange on July 31, 2002. Headquartered in Shenzhen, Guangdong, China, BYD is a high-tech private enterprise with three major industries: IT, automobiles, and new energy. BYD has established nine production bases in Guangdong, Beijing, Shaanxi, Shanghai, Tianjin, and other locations, covering a total area of nearly 7 million square meters. The company also has subsidiaries or offices in the United States, Europe, Japan, South Korea, India, and regions such as Taiwan and Hong Kong, China, with a total workforce of nearly 200,000 employees.
2
1
Share

Release the Clutch or Brake First After Braking?

After braking, you should release the brake before the clutch. There are three types of braking systems: 1. Foot brake: The most commonly used brake while driving is operated by the foot, hence also called the foot brake. When the driver presses the brake pedal, the braking force is transmitted mechanically or hydraulically to the wheel's braking device, creating friction. 2. Parking brake: Also known as the handbrake, it prevents the vehicle from slipping when parked. There are generally two types: the intermediate brake mounted on the driveshaft and the direct rear-wheel brake control. 3. Anti-lock braking system (ABS): When driving on slippery or icy low-friction roads, excessive braking can cause the wheels to lock up and lose traction, leading to a loss of steering control. To enable effective directional control on such hazardous surfaces, the ABS (Anti-lock Braking System) was developed.
1
2
Share

Where is the fuel tank cap switch of the Cruze located?

The fuel tank cap switch of the Cruze is located below the driver's seat on the left side, within reach of the left hand. There are generally two buttons: 1. One is responsible for opening the trunk. 2. The fuel tank cap switch has a fuel pump graphic, and you can lift it upwards to open the fuel tank cap. Additional information: If the fuel tank cap cannot be opened, you can start from the trunk. First, remove the liner covering the fuel tank in the trunk. The liner is usually fixed by some plastic clips and can be easily pried open with a screwdriver. After removing the liner, you can see the locking mechanism of the fuel tank cap and the cable for remote operation of the fuel tank cap. Simply pull the cable to open the fuel tank cap.
10
2
Share

How often should the timing belt of EA211 be replaced?

For vehicles equipped with Volkswagen's EA211 engine, the replacement interval for the timing belt may vary depending on the vehicle's usage environment and the driver's habits. Generally, it is recommended to replace the timing belt no later than every 80,000 kilometers. After replacement, the timing belt should be inspected every 30,000 kilometers. More information about Volkswagen's EA211 is as follows: 1. The Volkswagen EA211 is a four-cylinder small-displacement engine, available in 1.4L and 1.6L variants. 2. These two engines use a timing belt drive system to operate the engine. Compared to chain-driven engines, timing belt systems produce less noise, offer smoother transmission, and have significantly lower maintenance costs when servicing the engine.
10
0
Share

Where is the VIN number located on the Nissan Sylphy?

The VIN number of the Nissan Sylphy can mainly be found in the following locations: 1. On the lower left side of the front windshield, near the driver's side. 2. After opening the engine hood, on the vehicle's side frame, usually on the passenger side; and under the passenger seat - push the seat all the way back to see it on the beam beneath the seat. Here's some information about VIN numbers: 1. A VIN (Vehicle Identification Number) is a 17-character serial number consisting of both numbers and letters. 2. The motor vehicle driving record database contains VIN-related information, such as the vehicle's inspection time, ownership change records, and whether it has been involved in serious accidents like crashes, rollovers, or flooding.
15
4
Share

How to Use the Foot Brake in the Nissan Sylphy?

The operation method of the Nissan Sylphy's foot brake is as follows: 1. When starting the vehicle, use your right foot to press the brake pedal, then use your left foot to press the parking foot brake pedal all the way down. The parking foot brake pedal will pop up and return to its free state, at which point you can press the accelerator pedal to drive. 2. After the vehicle comes to a stop by pressing the brake pedal, use your left foot to press the foot brake pedal all the way down to lock the vehicle. At this point, the foot brake pedal is in its lowest position. 3. Additional Information: There are three types of parking brakes: electronic parking brake, foot parking brake, and mechanical handbrake. Both the foot parking brake and mechanical handbrake use mechanical mechanisms to achieve parking brake function, while the electronic parking brake uses an electric motor to pull the steel cable and lock the wheels.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.