How many points are deducted for stalling in Driving Test Subject 3?

1 Answers
VonAlice
07/30/25 1:38am
Stalling during the Subject 3 test will result in a deduction of 10 points. Below is an introduction to the reasons for stalling: 1. Improper clutch and throttle adjustment: The main cause of stalling is usually the improper coordination between the clutch and throttle, or lifting the clutch too quickly when starting, i.e., releasing the pedal too fast. This leads to a mismatch between the engine's output power and the transmission input shaft's power, causing a sudden increase in friction and resulting in stalling. 3. Braking timing: Press the brake pedal, gently lift the clutch until you feel the car body shaking, as if it's ready to move. Then gently release the brake while keeping the clutch steady with your left foot. When releasing the brake, the car should move forward instead of rolling backward. The intensity of the car body shaking needs to be experienced during practice. If the brake is released too early, the force may be insufficient, leading to rolling. If the brake is not released when the shaking is very severe, stalling is likely to occur.
Was this review help?
4
3
Share
More Forum Discussions

What is the fuel consumption per 100 kilometers of the Kawasaki H2?

The Kawasaki ZX-6R has a comprehensive fuel consumption of 7.1L per 100 kilometers. Methods to reduce fuel consumption and influencing factors are introduced as follows: Methods to reduce fuel consumption: You can add fuel additives to the fuel tank to improve combustion and remove carbon deposits. It is recommended to regularly inspect and maintain the vehicle, clean or replace the three filters, which will reduce fuel consumption. At the same time, the longer the idle parking time, the greater the fuel consumption, so try to minimize idle parking time; and avoid rapid acceleration, stepping hard on the throttle, and driving the car at lower RPMs. Factors affecting fuel consumption: Various working conditions such as acceleration, deceleration, braking, and engine idling, as well as load capacity, temperature, and whether the air conditioning is on, will all affect the car's fuel consumption.
5
0
Share

How to Remove Odor in the Car?

Methods to remove odor in the car are as follows: Open windows for ventilation: Open the car windows more often while driving to allow air exchange between the inside and outside of the car, helping the odor to volatilize and dissipate. Place fruit peels: Use fruit peels to eliminate odors. Prepare some orange peels, grapefruit peels, or other fruit peels and place them in the corners of the car to fill the car with a fruity fragrance. Use a car air purifier: Car air purifiers are specifically designed to clean the air inside the car and remove odors. Turning on the car air purifier can significantly reduce the smell inside the car in a short time. Remove the source of the odor: Maintaining cleanliness inside the car and reducing the sources of odor is the most fundamental method to eliminate odors.
15
5
Share

Where is it safe to park a car during heavy rainstorms?

It is best to park the vehicle in a high-altitude area or an indoor parking space with elevated terrain. Definition of vehicle wading: Vehicle wading, as the name suggests, refers to driving a vehicle in low-lying, waterlogged areas or passing through water. This usually occurs during rainy weather when inadequate drainage leads to water accumulation in low-lying road sections. Precautions for vehicle wading: Before wading, observe the road conditions carefully. While in the water, maintain steady power. After wading, inspect the electrical system. If the car stalls in water, the primary cause is usually water entering the exhaust pipe, though circuit damage may also occur in some cases. Once the car stalls, do not attempt to restart it, as this may cause water to enter the intake manifold and damage the valves, potentially leading to severe engine failure. Instead, the car should be towed immediately to a 4S shop for professional handling.
11
1
Share

Why hasn't the vehicle management office been reviewing?

The reason why the vehicle management office has not been reviewing may be that the reported driving school or coach does not have student quotas. Definition: The vehicle management office is a direct agency of the public security system, mainly responsible for handling motor vehicle registration, modification, transfer, mortgage, and cancellation registration. It is generally available only at the county level or above administrative regions. Position Supervision: Each motor vehicle and driver's license business position in the vehicle management office has the obligation to supervise the work situation of the previous position. If there are doubts about the procedures handed over by the previous position, or if the business is handled in violation of regulations, as well as issues such as non-standard filling of certificates and forms, or failure to sign and seal as required, it should be reported to the supervision position. The supervision position should immediately investigate and handle the matter and make a record of the handling.
5
2
Share

What are the explanations for the center console buttons in the 2010 Enclave?

The functions of the center console buttons in the 2010 Enclave are as follows: Electronic Stability Program (ESP): Can be manually turned off in conditions like rain, snow, or muddy roads. Normally, keeping it on helps prevent skidding or fishtailing. Parking Radar/Image: The center display shows the rearview image, and the radar alerts with a warning sound when approaching obstacles. Auto Hold: At traffic lights, the vehicle won't roll away even after releasing the brake pedal. Pressing the accelerator unlocks the wheels, allowing the car to move again. Auto Start-Stop: When activated, the engine temporarily shuts off. It restarts when the driver's foot leaves the brake pedal. Recirculation/Fresh Air Mode: Recirculation means the air inside the car is recycled, while fresh air mode exchanges air between the inside and outside. Generally, use recirculation in heavy traffic or poor air quality outside. On highways, switch to fresh air mode every hour or so to refresh the cabin air and prevent oxygen deprivation.
4
1
Share

Why is it necessary to regularly inspect or replace the engine drive belt?

Regular inspection or replacement of the engine drive belt is necessary because the belt is a rubber product prone to aging, which can lead to serious mechanical failures. Here are details about the belt: 1. Determine replacement intervals based on mileage: The belt is a consumable part. Once it breaks, the camshaft will not operate in sync with the timing, which can cause severe damage due to valve and piston collision. Therefore, the timing belt must be replaced according to the mileage or time specified by the manufacturer. 2. Shorter lifespan than metal gears: The drive belt is a critical component of the engine's valve timing system. It connects to the crankshaft and ensures accurate intake and exhaust timing through a specific gear ratio. Belts are used instead of gears for transmission because they produce less noise, have minimal variation, and are easier to compensate. However, it's evident that the lifespan of the drive belt is shorter than that of metal gears, so regular belt replacement is essential.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.