How many points are deducted for speeding at 140 km/h on the highway?

Which one is the Enclave motor relay?

The Enclave motor relay is labeled with its English abbreviation inside the fuse box. Working principle of the relay: The coil of the starting relay is connected in series with the running winding of the compressor motor. During motor startup and operation, the operating current passes through the relay coil, while the control contacts are connected in series with the starting winding, controlling its closure and disconnection. The control contacts of the relay are normally open. When power is first applied, current flows only through the relay coil and the running winding. Since the rotor is stationary, the starting current is very high, causing the relay coil to attract the armature upward, closing the moving and stationary contacts and connecting the starting winding, which allows the compressor to begin rotating. As the speed increases, the current decreases, and the armature falls back by its own weight, opening the contacts and completing the starting process. Function of the starting relay: It assists the motor in starting and automatically disconnects the auxiliary winding after startup to prevent burning out the auxiliary winding coil. When the motor's running winding is energized and the startup phase transitions to normal operation, the starting relay cuts off the power to the starting winding.

15

1

Share

What are the chassis codes for previous generations of the Fit?

The chassis code for the Fit is GK5. Function of the chassis: The chassis serves to support and install the car's engine and its various components and assemblies, forming the overall shape of the vehicle. It receives the engine's power to enable the car's movement and ensure normal driving. Additionally, a good chassis can safeguard the driver's life. Components of the chassis: The chassis consists of four main parts: the transmission system, the running gear, the steering system, and the braking system. The transmission system mainly includes the clutch, gearbox, universal joint, drive shaft, and drive axle. The running gear is composed of the frame, axle, suspension, and wheels, with the basic function of supporting the vehicle's weight and ensuring its movement. The steering system consists of the steering wheel, steering gear, steering knuckle, steering arm, tie rod, and drag link, all of which work together to enable steering. The braking performance of a motor vehicle refers to its effectiveness in forcing the vehicle to stop in the shortest possible time.

15

4

Share

How many times should the brake be tapped during Subject 3 test?

Subject 3 requires tapping the brake 7 times. Here are the specific details: Straight through intersections: Before entering an intersection during straight-line driving, you need to tap the brake to slow down. The speed should not exceed 30km/h when passing through the intersection. Pedestrian crossings: During the road test, when you see a pedestrian crossing ahead, you must reduce your speed. If there are pedestrians on the crossing, you must stop the vehicle and yield to them. Remember, do not stop the vehicle on the pedestrian crossing. Bus stops: During the road test, if you hear the voice prompt to pass a bus stop, you must immediately tap the brake. Passing schools: In areas near schools, the speed must be kept below 30km/h, and you must also use the brake appropriately. U-turns: When making a U-turn, you need to reduce your speed. This ensures the vehicle does not lose control due to excessive speed and inertia during the turn.

17

2

Share

What is the difference between the Mercedes-Benz CLA AMG and C-Class AMG?

Mercedes-Benz CLA-Class AMG is equipped with a 2.0T L4 421 horsepower turbocharged engine, with a maximum power of 310 KW and a maximum torque of 500 N•m, paired with an 8-speed dual-clutch transmission. The Mercedes-Benz A-Class AMG is equipped with a 2.0T L4 306 horsepower turbocharged engine, with a maximum power of 225 KW and a maximum torque of 400 N•m, paired with a 7-speed dual-clutch transmission. Introduction to Mercedes-Benz CLA-Class AMG: The Mercedes-Benz CLA AMG is the latest member of the AMG family and is also known as the "most powerful mass-produced 2.0T four-cylinder car in history." Its large multi-spoke wheels and rear aerodynamic kit give the car a very sporty appearance. Introduction to Mercedes-Benz AMG: Mercedes-AMG is a high-performance sub-brand of Mercedes-Benz, specializing in the development of high-performance vehicles. In the 1990s, AMG introduced classic models such as the C36 AMG, E50 AMG, C43 AMG, and various versions of the "55" series after 1997.

6

5

Share

What is the reason for the oil pressure warning light turning off when accelerating?

The reasons why the oil pressure warning light turns off when accelerating: 1. Faulty oil pressure sensor: As an electronic component, when the sensor malfunctions, the oil light may illuminate. 2. Clogged oil filter: Some inferior oil filters may become blocked, and if their bypass function has insufficient flow, this can slow down oil circulation and cause insufficient oil pressure. 3. Oil pump failure: Generally accompanied by increased engine noise and illumination of the oil warning light. 4. Excessive oil viscosity or low oil pump pressure: Leading to insufficient oil pressure. Additional relevant information: Oil pressure: When the oil level falls below the engine's warning threshold, the oil pump cannot circulate sufficient oil, resulting in reduced oil pressure. It should be noted that some vehicles are designed with safety considerations in mind, intentionally setting the dipstick's lower limit higher. The dipstick's lower limit is merely a reference, and the actual warning level is lower than this limit. In other words, oil levels below the dipstick's lower limit do not necessarily trigger the oil warning light.

2

1

Share

How many years after the age of a private car is it subject to two inspections per year?

Private cars that are over 15 years old are subject to two inspections per year. Private cars are exempt from inspection within the first 6 years; after 6 years, they must undergo one inspection per year; after 15 years, they require two inspections per year. For passenger transport vehicles, inspections are required once per year within the first 5 years; after 5 years, inspections are required every 6 months. For cargo vehicles and large or medium-sized non-passenger transport vehicles, inspections are required once per year within the first 10 years; after 10 years, inspections are required every 6 months. According to relevant laws, vehicle owners can apply for an inspection compliance mark at the local vehicle management office within three months before the expiration of the current inspection period. Notes for private car annual inspections: The compulsory traffic insurance policy must be valid, all traffic violations must be resolved, and all required documents must be prepared (ID of the owner or agent, vehicle registration certificate, insurance policy). Do not forget to bring the triangular warning sign and fire extinguisher. If the vehicle has been modified or has non-compliant stickers, these must be removed before the inspection to avoid failure.

5

0

Share

How many points are deducted for speeding at 140 km/h on the highway?

Which one is the Enclave motor relay?

What are the chassis codes for previous generations of the Fit?

How many times should the brake be tapped during Subject 3 test?

What is the difference between the Mercedes-Benz CLA AMG and C-Class AMG?

What is the reason for the oil pressure warning light turning off when accelerating?

How many years after the age of a private car is it subject to two inspections per year?

Can 84 Disinfectant Be Used to Disinfect the Interior of a Car?

How many people can take the Subject 4 test at one time?

Does Audi Have Image and Distance Sensors?

Is the left foot allowed to rest on the clutch during Subject Three?