How many points are deducted for running a red light in Xiamen City?

2 Answers
DiCody
07/29/25 6:08am
According to Article 2, Paragraph 1, Item 2 of the "Scoring Standards for Road Traffic Safety Violations," driving a motor vehicle in violation of traffic signal lights results in a deduction of 6 points per violation. Running a red light refers to the act of a motor vehicle violating the prohibition of passage during the red light phase at a signal-controlled intersection or road section, crossing the stop line and continuing to move. According to Article 26 of the "Road Traffic Safety Law": Traffic signal lights consist of red, green, and yellow lights. A red light indicates prohibition of passage, a green light indicates permission to proceed, and a yellow light serves as a warning. Article 44 states: When a motor vehicle passes through an intersection, it shall proceed according to the traffic signal lights, traffic signs, traffic markings, or the direction of a traffic police officer. Here are some tips to avoid running a red light: Check the arrow light first, then the circular light: Currently, there are two types of indicator lights: arrow traffic lights and circular indicator traffic lights. When arrow lights are present, check the arrow light first and then the circular light to avoid running a red light. Note: When encountering a circular red light, you may turn right; when encountering an arrow signal light where the right-turn arrow is red, you cannot turn right, otherwise, it will be penalized as running a red light. Brake in time: When the red light is on, do not let the front of the vehicle cross the stop line. If the front wheels accidentally cross, and the rear wheels follow, the electronic camera will capture it, and it will be penalized as running a red light. If the front wheels have just crossed the stop line when the signal turns red, passage through the intersection is prohibited; wait for the green light before proceeding. Check the green light countdown before proceeding: When the green light is flashing, if there is a countdown, judge accordingly; if there is no countdown, and the vehicle is close to the intersection with high speed, you may proceed to avoid running a red light due to untimely braking. If the speed is slow and the vehicle is far from the intersection, brake immediately to stop and avoid running a red light. Article 38 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China" states regarding motor vehicle signal lights and non-motor vehicle signal lights: When the green light is on, vehicles are permitted to proceed, but turning vehicles must not hinder the passage of straight-going vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue to proceed. When the red light is on, vehicles are prohibited from proceeding. At intersections without non-motor vehicle signal lights or pedestrian crossing signal lights, non-motor vehicles and pedestrians shall proceed according to the motor vehicle signal lights. When the red light is on, right-turning vehicles may proceed if they do not hinder the passage of other vehicles or pedestrians. Running a red light is not considered illegal under the following circumstances: Yielding to special vehicles: Yielding to ambulances, fire trucks, or other special vehicles. If captured by surveillance cameras while yielding to special vehicles, the violation will not be recorded during manual review. Even if recorded, you can apply for reconsideration at the traffic police department. Extreme weather: When visibility is very low, and even electronic police cannot clearly see the traffic lights. The evidence photos may be blurry, and accidental running of a red light will not be penalized by traffic police. Emergency situations: When transporting a critically ill patient to the hospital, it is inevitable to run many red lights, and 12 points may not be enough. After delivering the patient, the driver can provide proof from the hospital or the rescued person to the traffic police for verification. If confirmed, the violation record can be cleared. If possible, it is best to call an ambulance to avoid accidents caused by running red lights. Traffic police direction: During peak hours, traffic police may temporarily direct traffic at important intersections. Drivers should follow the gestures of the traffic police.
Was this review help?
4
4
Share
VanGianna
08/12/25 9:37am
Once my friend accidentally ran a red light on Hubin North Road in Xiamen and got caught on camera. Now it's a nationwide standard of 6 points deducted and a 200 yuan fine. I happened to be in the passenger seat that time and saw him fail to brake in time, crossing the line—what a shame. Xiamen has particularly many traffic cameras in areas like Siming and Huli, especially around schools and hospitals where enforcement is stricter. Actually, you can check the violation on the traffic management app 12123 within 7 days of being caught. If only the rear of the car crossed the line and stopped, you might even appeal the ticket. A reminder to everyone when calculating points: the scoring cycle resets annually on the driver's license issuance date. Currently, 6 points equal half the value of your license—running another red light would mean having to attend remedial classes and tests.
Was this review help?
16
4
Share
Expand All
More Forum Discussions

What kind of engine oil should be used for Suzuki New Alto?

For the 1.0 engine of the New Alto, it is recommended to use engine oil with a viscosity of 5W-20 or 0W-20. The former viscosity is usually semi-synthetic oil, while the latter is mostly fully synthetic oil, which is relatively more expensive but offers better protection. Both viscosities are suitable. Here is some relevant information about engine oil: 1. Under the condition of ensuring lubrication, choose lubricating oil with as low viscosity as possible based on the temperature range during use, engine temperature, and actual vehicle condition. For engines in good condition with minimal wear, lubricating oil with lower viscosity, such as 5W30, can be selected. For engines with severe wear and larger gaps, lubricating oil with slightly higher viscosity, such as SJ or SL grade oil, can be appropriately chosen. 2. SAE15W-40, SAE5W-40: The "W" stands for winter. The smaller the number before it, the better the low-temperature fluidity of the oil, indicating a lower usable environmental temperature and better protection for the engine during cold starts. The number after the "W" (after the dash) indicates the oil's high-temperature resistance. The larger the number, the better the oil's protective performance under high temperatures.
2
0
Share

How Many Turns to Lock the Steering Wheel and How Many to Center It?

Steering wheel lock is generally one and a half turns. After locking to the right, turning back one and a half turns will center it, and the same applies when locking to the left. Below is some related information about the steering wheel: 1. Introduction: The steering wheel is usually connected to the steering shaft via splines, and its function is to convert the force applied by the driver to the edge of the steering wheel into torque, which is then transmitted to the steering shaft. Using a larger-diameter steering wheel reduces the hand force required from the driver during steering. The steering intermediate shaft serves as a connecting piece between the steering gear and the steering shaft, facilitating the standardization of the steering gear, compensating for errors during manufacturing and installation, and making the installation of the steering gear and steering wheel in the vehicle more reasonable. 2. Precautions: It is important to note that when turning the vehicle, locking the steering wheel increases the pressure on the power steering pump several times or even more. Continuously locking the steering wheel can further shorten the lifespan of the power steering pump. Therefore, the steering wheel should not be continuously locked.
5
4
Share

Why does a Mercedes-Benz car not accelerate when the throttle is fully pressed?

The reasons why a Mercedes-Benz car does not accelerate when the throttle is fully pressed include clogged fuel injectors, fuel line leaks, and reduced fuel pump performance. Below is an introduction to related Mercedes-Benz content: 1. Mercedes-Benz SAM: The control unit, also known as the Signal Acquisition and Actuation Module. If the SAM malfunctions, components such as headlights, turn signals, and wipers cannot be controlled while driving, posing safety risks. 2. Mercedes-Benz: A German automotive brand, considered one of the most successful premium car brands in the world. It is renowned for its perfect technical level, stringent quality standards, continuous innovation, and a series of classic coupe models. The Mercedes-Benz three-pointed star has become one of the most famous automotive and brand symbols globally. Mercedes-Benz cars not only have unparalleled quality but also a comprehensive range of models, currently producing mainly A-Class cars, C-Class cars (mid-range sedans and coupes), E-Class cars (high-end sedans and coupes), S-Class cars (luxury sedans and coupes), and G-Class cars (SUV off-road vehicles).
9
3
Share

What is the difference between Mercedes-Benz A maintenance and B maintenance?

Here are the differences between Mercedes-Benz A maintenance and B maintenance: 1. Maintenance items: Mercedes-Benz A maintenance is a regular minor maintenance, which involves changing the engine oil and oil filter; B maintenance includes the A maintenance items plus the air filter and cabin air filter. 2. Cost: B maintenance is more expensive, but the actual cost depends on the quality of the oil and parts used. If general oil and parts are used, they will all need to be replaced. Below is additional information about Mercedes-Benz: 1. Mercedes-Benz SAM: The control unit, also known as the Signal Acquisition and Actuation Module. If the SAM malfunctions, components such as headlights, turn signals, and wipers cannot be controlled while driving, posing a safety hazard. 2. Mercedes-Benz: A German automotive brand, considered one of the most successful premium car brands in the world. It is renowned for its perfect technical standards, rigorous quality benchmarks, innovative capabilities, and a series of classic coupe models. The Mercedes three-pointed star has become one of the most famous automotive and brand logos in the world. Mercedes-Benz cars not only boast unparalleled quality but also offer a comprehensive range of models, currently producing A-Class, C-Class (mid-range sedans and coupes), E-Class (high-end sedans and coupes), S-Class (luxury sedans and coupes), and G-Class (SUV off-road vehicles).
15
1
Share

Which Mercedes-Benz Model Features the Large Display Screen?

As of now, the Mercedes-Benz models on the market equipped with integrated large display screens include the A-Class, C-Class, E-Class, S-Class, GLE, and G-Class. Below is an introduction to related Mercedes-Benz content: 1. Mercedes-Benz SAM: The control unit, also known as the Signal Acquisition and Actuation Module. If the SAM malfunctions, components such as headlights, turn signals, and wipers cannot be controlled while driving, posing safety risks. 2. Mercedes-Benz: A German automotive brand, considered one of the world's most successful premium car brands. It is renowned for its perfect technical level, rigorous quality standards, innovative capabilities, and a series of classic coupe models. The Mercedes-Benz three-pointed star has become one of the most famous automotive and brand logos in the world. Mercedes-Benz cars not only boast unparalleled quality but also offer a comprehensive range of models, currently producing mainly A-Class (compact cars), C-Class (mid-range sedans and coupes), E-Class (high-end sedans and coupes), S-Class (luxury sedans and coupes), and G-Class (SUV off-road vehicles).
3
4
Share

Why does the Mercedes-Benz display a tire pressure warning?

Mercedes-Benz displaying a tire pressure warning indicates insufficient tire pressure. Generally, it will alert when the pressure is below 1.8 bar or exceeds 3.0 bar. At this point, tire inspection and pressure adjustment are necessary. Tire Pressure Reset Method: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button until you hear a "beep" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, completing the tire pressure reset. Solutions for Insufficient Tire Pressure: If no damage is visible, simply inflate the tire to the normal pressure and reset the tire pressure system; If inspection reveals a puncture in the tire, drive to a tire shop promptly for repair, then reinflate the tire; If the tire pressure warning reappears some time after inflation without any punctures, it might be due to air leakage caused by a deformed wheel rim. It is recommended to inspect the wheel rim and consider replacement.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.