How many points are deducted for running a red light in Subject 3?

2 Answers
KevinAnn
07/28/25 8:20pm
During the Subject 3 test, if a student runs a red light, no points will be deducted, but the test will be failed. This is because the student is a beginner without a driver's license, so points cannot be deducted. More information about running a red light is as follows: 1. Running a red light is a violation of traffic signals. According to the "Road Traffic Safety Violation Scoring Regulations": driving a motor vehicle in violation of traffic signal rules will result in a deduction of 6 points and a fine of 200 yuan. 2. Before being identified as running a red light, three photos must be taken: a photo of the vehicle at the stop line under a red light, a photo of the vehicle crossing the stop line under a red light, and a photo of the vehicle continuing to move beyond the stop line under a red light. 3. If the vehicle only has its front wheels slightly over the stop line at a red light but stops immediately, the traffic police will not impose a penalty. However, if the vehicle completely crosses the stop line before stopping during the red light, it will be considered a violation and penalized.
Was this review help?
9
2
Share
VivianRose
08/12/25 1:08am
Running a red light during the Subject 3 driving test results in an immediate 100-point deduction. Considering the total test score is only 100 points, this means an automatic failure, requiring you to start over from scratch. I still remember how driving instructors at the training school constantly emphasized this—running a red light isn't just a test dealbreaker, but a life-or-death situation on real roads. Students often get nervous and rush through without clearly seeing the traffic signal, only to be immediately stopped by the examiner. Safety comes first—stopping at red lights and proceeding at green is fundamental. During the test, stay calm, observe your surroundings, and don’t panic if pressured by vehicles behind you. Regular practice should include simulating various traffic light scenarios to develop an instinctive braking reflex. Failing the test not only wastes money and time but can also dent your confidence, so it’s crucial to stay sharp and avoid mistakes. Think about the harsh consequences of running a red light in real driving—light penalties like fines and demerits, or worse, causing accidents. This is no joke.
Was this review help?
5
2
Share
Expand All
More Forum Discussions

Where is the airbag module located in the Nissan Sylphy?

The airbag locations in the Sylphy are as follows: the driver's supplemental front airbag is located in the center of the steering wheel, the passenger's supplemental front airbag is positioned on the dashboard above the glove box, and the supplemental side-impact airbags are located on the outer side of the front seat backs. Airbag Introduction: The electronic airbag system is a passive safety protection system. When used in conjunction with seat belts, it provides effective collision protection for occupants. In the event of a car collision, airbags can reduce head injury rates by 25% and facial injury rates by approximately 80%. Airbag Components: Mainly consists of airbag sensors, collision airbags, and electronic control devices. The driver-side collision airbag is installed in the steering wheel, while the passenger-side collision airbag is generally mounted on the dashboard.
13
2
Share

What is the total length of the Audi A8 in meters?

The Audi A8 has a body length of 5302mm, a width of 1945mm, a height of 1485mm, and a wheelbase of 3128mm. Below is relevant information about the Audi A8: 1. Powertrain: The A8 3.7 quattro delivers a maximum power output of 206kW (6000rpm) with peak torque of 360N·m (3750r/min); the A8 4.2 quattro produces 246kW (6500rpm) maximum power and 430N·m (3500r/min) peak torque. 2. Safety: The all-new Audi A8L features an aluminum body built on ASF (Audi Space Frame) technology, reducing weight by 40% compared to steel bodies. The ASF structure comprises cast components, formed sections, and aluminum sheets, with its integrated B-pillar constructed from ultra-high-strength thermoformed steel.
3
1
Share

How to Adjust the Rearview Mirrors Most Appropriately for Subject Two?

Subject Two rearview mirror adjustment methods are as follows: Left rearview mirror: Adjust vertically so that the sky and ground each occupy half of the mirror surface; adjust horizontally so that the car body occupies 1/4 of the mirror surface while ensuring the lowest point of the wheel touching the ground is clearly visible. Right rearview mirror: Adjust vertically—since the driver's seat is on the left, observing the right side of the road is more challenging, so the ground should occupy 3/4 of the mirror surface and the sky 1/4; adjust horizontally so that the car body occupies about 1/4 of the mirror surface. Central rearview mirror can be adjusted as needed: Due to differences in the driver's height and viewing angle, the adjustment of the central rearview mirror may vary; generally, adjust it so that your own reflection is horizontally cut on the left side of the mirror, but the driver should also make adjustments based on personal needs.
19
4
Share

Where is the cabin air filter located in the Mercedes-Benz C200?

The cabin air filter in the Mercedes-Benz C200 is located inside the glove compartment in front of the front passenger seat. Open the glove compartment to access it. Steps to replace the cabin air filter: 1. Use a T20 Torx screwdriver to remove the screws on the lower panel of the glove compartment. 2. Lift the panel to remove it, revealing the cabin air filter and its housing. 3. On both sides of the filter housing, there are two white metal clips. Remove them and push the H-shaped mechanism in the middle of the housing to the left to take out the filter. 4. Install the new filter and reassemble everything. The Mercedes-Benz C200 has a body length of 4526mm, width of 1728mm, height of 1427mm, and a wheelbase of 2715mm.
13
4
Share

Where is the carbon canister solenoid valve located on the Haval H2?

Haval H2's carbon canister solenoid valve is located in the engine compartment, at the upper right side of the throttle body. Method to check if the carbon canister solenoid valve is leaking: First remove the carbon canister solenoid valve, then blow air into the intake port with your mouth. If air does not pass through, it is intact; if air passes through, it indicates leakage. In this case, the vehicle may require multiple ignition attempts to start. Introduction to the carbon canister: It is generally installed between the fuel tank and the engine. Since gasoline is a volatile liquid, the fuel tank often contains vapor at normal temperatures. The fuel evaporation emission control system's function is to direct these vapors into the combustion process and prevent them from being released into the atmosphere.
12
5
Share

How many points are deducted for failing to yield to a school bus as required?

Failing to yield to a school bus as required while driving will result in a deduction of 6 points. More details are as follows: Correct methods for yielding to a stopped school bus: When a school bus stops on a road with only one lane in the same direction, vehicles behind should stop and wait without overtaking. When a school bus stops on a road with two or more lanes in the same direction, vehicles in the same lane behind and in adjacent lanes should stop and wait, while vehicles in other lanes should slow down and pass. If a lane change is necessary, follow the road markings. Safety precautions when riding a school bus: Do not sit in the front passenger seat; keep hands or any other body parts inside the vehicle while the bus is moving; avoid eating or drinking during the ride to prevent food or beverages from entering the respiratory tract in case of sudden braking or accidental collision, which could cause injury or endanger life.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.