How many points are deducted for reversing on the road?

2 Answers
EdwardDella
07/25/25 1:32am
Reversing against the traffic flow results in a deduction of 3 points and a fine of 200 yuan. According to Article 35 of the 'Road Traffic Safety Law of the People's Republic of China': Motor vehicles and non-motor vehicles shall drive on the right side. Vehicles driving against the traffic flow will be fined. Motor vehicles driving in reverse will be penalized with a deduction of 3 points and a fine. Reversing on highways results in a deduction of 12 points and a fine. According to Order No. 123 of the Ministry of Public Security, the point deduction standards for vehicles driving in reverse are as follows: 1. If a motor vehicle driver commits any of the following violations, 12 points will be deducted at once: Driving a motor vehicle in reverse, against the traffic flow, or making a U-turn across the central divider on a highway. 2. If a motor vehicle driver commits any of the following violations, 3 points will be deducted at once: Driving a motor vehicle without overtaking or yielding as required, or driving against the traffic flow. 3. The penalty for driving against the traffic flow as stipulated in Article 90 of the 'Road Traffic Safety Law': If a motor vehicle driver violates the road traffic safety laws and regulations regarding road traffic rules, a warning or a fine of not less than 20 yuan but not more than 200 yuan shall be imposed. If there are other provisions in this Law, the penalties shall be imposed in accordance with those provisions.
Was this review help?
12
0
Share
LaIsabelle
08/10/25 4:09pm
When I first got my driver's license, I was caught reversing at a busy intersection in the city and got 3 points deducted plus a 200-yuan fine, which really hurt. Traffic rules state that reversing in no-reversing zones, such as tunnels, one-way streets, and expressway entrances, results in an immediate 3-point deduction because these areas have heavy traffic, and reversing can easily cause rear-end collisions or accidents. Now, I drive very carefully, always checking the route map before parking and planning the exit position to avoid reversing. Safety is more important than points deduction. New drivers should pay extra attention to road signs, familiarize themselves with no-reversing zones, and develop good driving habits to avoid trouble.
Was this review help?
9
0
Share
Expand All
More Forum Discussions

Does a driver's license being expired for one or two days affect renewal?

A driver's license being expired for one or two days does not affect renewal; it can be renewed normally. Time regulations: If the license has been expired for less than one year, it can be renewed normally; if expired for more than one year but less than three years, the license will be canceled, but renewal is possible by passing the subject one exam; if expired for more than three years, the license becomes invalid and cannot be renewed. The renewal process is as follows: The motor vehicle driver should bring the required materials to the vehicle management office where the driver's license was originally issued to apply for renewal. The vehicle management office will process the renewal within one working day after approval. Drivers can renew their license via the "Traffic Management 12123" APP. Download the "Traffic Management 12123" APP, then select Service Center -- Expired License Renewal Service -- fill in the required information. The new license is generally delivered by mail. Visit the "Police-Medical-Post" service point at a postal office to complete the renewal process. The entire process, from registration to medical examination to new license production, takes only half an hour. Currently, only a few cities offer this service, such as Hangzhou.
4
4
Share

How Long Does the BMW 530le Battery Last?

BMW 530le battery life is the same as the vehicle's lifespan. Below are specific details about BMW batteries: 1. BMW's remote after-sales service includes a battery protection function that closely monitors the charge level of the high-voltage power battery. 2. Service centers can inform owners about battery-related information via SMS or email to remind them to charge promptly, ensuring vehicle performance and extending battery pack life. Here are three different hybrid operation modes to use the limited battery power more efficiently: 1. They are: Auto-eDrive mode, MAX-eDrive mode, and SAVE-Battery mode. 2. Auto-eDrive is the default mode of the hybrid system, where the system automatically selects the most suitable driving form based on factors like driving speed, driver actions, and battery charge level. When pressing the eDrive button below the start button, the vehicle enters MAX-eDrive mode, which is the forced pure electric mode. 2. SAVE-Battery mode is specifically designed to accumulate vehicle battery power. If the driver anticipates heavy use of electric mode during subsequent driving, simply activate 3. SAVE-Battery mode, and the vehicle will switch to the gasoline engine as the main driving unit, maintaining the current charge level for later use in electric mode.
11
2
Share

What is the function of the Mazda3 fuel pressure regulator?

Mazda3 fuel pressure regulator is a component that ensures normal fuel pressure in the vehicle's fuel system. Inside the pressure regulator, there is a diaphragm that controls the opening and closing of the pressure valve. When the fuel pressure drops below a certain value, the pressure valve closes, allowing the fuel pump to increase the pressure in the fuel line. When the pressure exceeds the specified level, the diaphragm opens, and the excess fuel flows back to the fuel tank through the return line, thereby reducing the pressure. Mazda3 is a car model under Changan Mazda, with a body size of 4515mm in length, 1745mm in width, and 1465mm in height, and a wheelbase of 2640mm.
4
2
Share

What Does the Tire Model Represent?

Tire model represents: The numbers and letters have different meanings: In 225/60R17, 225 represents the section width, which is the width of the tire tread; 60 represents the aspect ratio, which is the height of the tire sidewall; R represents the tire type code, where R stands for radial tire; 17 represents the rim diameter, indicating that the tire is suitable for 17-inch rims. Tires are circular elastic rubber products mounted on various vehicles or machinery to roll on the ground. They are usually installed on metal rims, supporting the vehicle body, cushioning external impacts, ensuring contact with the road surface, and guaranteeing the vehicle's driving performance.
6
2
Share

How is the quality of the Lexus UX?

The following is a detailed introduction to the Lexus UX: 1. The Lexus UX is positioned as a compact SUV and is the most entry-level SUV model in the Lexus family. 2. The official GA-C platform endows the UX with a unique exterior, meticulously selected interior, and an efficient powertrain. Overall, the quality is excellent, and it offers high value for money. 4. In terms of appearance, the Lexus UX resembles a moving three-dimensional sculpture. The internal structure varies between the F SPORT version and the standard version. From the side view, the Lexus UX features a sleek and elongated body with well-balanced proportions. 5. The three standard versions come with 17-inch wheels and tires sized 215/60R17, while the three F SPORT versions are equipped with 18-inch wheels and tires sized 225/50R18. 6. In terms of power, the UX200 model is equipped with the latest Dynamic-Force series 2.0L engine, achieving the world's lowest thermal efficiency of 40%, with a maximum power output of 127kW (173PS), paired with a Direct-Shift CVT transmission. The UX260h features a hybrid system composed of a 2.0L naturally aspirated engine and an electric motor, delivering a combined maximum power output of 135kW (184PS). 7. In terms of configuration, the Lexus UX adopts a front MacPherson and rear multi-link suspension setup. Additionally, the UX260h F SPORT version is equipped with AVS variable suspension and an E-Four rear axle motor, enabling four-wheel drive functionality.
13
0
Share

How to Remove the Rear Seats of a Magotan

Here are the steps to remove the rear seats of a Volkswagen Magotan: 1. First, lift the rear seat cushion forcefully upwards. There are fixing clips on both sides, approximately at the middle third of the seat cushion. 2. After removing the clips, there are two U-shaped metal pieces at the back of the seat cushion. Corresponding metal hooks are located under the rear backrest. Push the seat cushion firmly inward to disengage the hooks. 3. Once the seat cushion is removed, unscrew the three screws under the rear backrest and lift it upwards to detach the backrest. Basic requirements for car seats: 1. The arrangement of seats within the entire cabin should be reasonable, especially the driver's seat, which must be positioned optimally. 2. The design of the seats must conform to human physiological functions, ensuring comfort while striving for aesthetic appeal. 3. Seats must be safe and reliable, with sufficient strength, stiffness, and durability. The structure should be compact while minimizing weight as much as possible. 4. Various adjustment mechanisms designed for the comfort of drivers and passengers must have reliable locking devices to ensure safety.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.