How Many Points Are Deducted for Reversing, Driving Against Traffic, or Making a U-turn on the Highway?

2 Answers
McLawson
07/25/25 1:35pm
Reversing, driving against traffic, or making a U-turn on the highway will result in a deduction of 12 points. Total Points on Driver's License: The driver's license has 12 points. According to relevant laws and regulations, the maximum deduction limit for a motor vehicle driver's license within one scoring cycle is 12 points. If the deduction reaches 12 points, the driver's license should be confiscated. Legal basis: Article 65 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" states that the cumulative scoring cycle for traffic safety violations is 12 months, with a full score of 12 points. Starting Time of Driver's License Points: The scoring cycle starts from the "initial license issuance date" on the driver's license, with one year as a cycle, and continues in this manner. If the penalty points reach 12 within one scoring cycle, the driver must attend a study session and pass the subject one exam at the vehicle management office where the license was issued or where the violation occurred to reset the points. Otherwise, the driver's license cannot be used normally.
Was this review help?
17
1
Share
DelLaila
08/11/25 8:48pm
I've been driving for almost twenty years and have seen all kinds of traffic violations like reversing, driving against the flow, and illegal U-turns on the road. The penalties for these are quite severe. Reversing on highways or main roads is strictly prohibited—get caught by a camera and you'll lose 12 points, which is equivalent to having your license revoked and needing to retake the test. Driving against the flow on regular roads also costs at least 12 points and is highly risky, often leading to accidents. As for U-turns, it depends on the location—making one where it's prohibited by signs will cost you 3 points and a fine. I often remind younger drivers that these actions are usually due to rushing or taking a wrong turn. Using a navigation app to plan ahead is much safer. Don’t drive recklessly—follow traffic rules to avoid accidents, protecting both your car and your life. Pay attention to road signs regularly, and with good habits, you’ll be just fine.
Was this review help?
11
4
Share
Expand All
More Forum Discussions

Can You Stop During Subject Two Driving Test?

Yes. In the C1 Subject Two driving test, stopping is allowed as long as it's not an illegal parking. The C1 Subject Two test includes five mandatory items: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves (commonly known as S-curves). Some regions may also include a sixth item: highway toll card collection. Skills to Master: The test requires candidates to grasp basic driving operation essentials and possess fundamental vehicle control abilities. They should be proficient in basic methods of driving on designated courses and roads within the test area, capable of properly using vehicle controls and accurately managing the vehicle's spatial position, including precise control over the vehicle's location, speed, and route. Parallel Parking: Parallel parking generally refers to parking alongside the curb. It is one of the test items in the Subject Two driving test. Parallel parking has become increasingly common in urban areas, especially as parking spaces in formal parking lots become more scarce. Many places have designated parking spaces along the sides of streets, known as 'parallel parking spaces.'
17
4
Share

Where is the spare key slot for the new Mondeo?

The spare key slot for the new Mondeo is located inside the center console. Additional information about the new Mondeo key is as follows: 1. The mechanical keyhole for the new Mondeo is on the door handle, and the small cover next to it can be pried open. 2. After removing the mechanical key, insert the key to hold it in place and then remove the lock cover in the direction of the arrow to reveal the keyhole. 3. First, press the key against the hole in your photo, then grip the white cover and slide it out in the direction of the arrow. After that, you will see a lock cylinder; insert the key and turn it to open. 4. The buttons on the Ford new Mondeo key include one for locking, one for unlocking, and one for the trunk. Press and hold the unlock button for 5 seconds to unlock and automatically open all windows completely, including the sunroof; press and hold the lock button for 5 seconds to lock the car and automatically close all windows, including the sunroof; press the trunk button twice in quick succession to automatically pop open the trunk. Additional information: 1. The Ford new Mondeo, as the flagship model of Changan Ford with the highest technological content and finest manufacturing craftsmanship, not only features multiple innovative technologies but also achieves comprehensive improvements in premium quality. 2. The powertrain and safety performance have been fully upgraded.
2
1
Share

Which side line will be pressed if the steering is too late during right reverse parking?

If the steering is too late during right reverse parking, the left line will be pressed. When reversing into the parking space, if the steering is applied too late, causing the vehicle body to fail to obtain sufficient turning radius for reverse parking, or if the left parking boundary line is about to be pressed without any adjustment, the left parking boundary line will be pressed. Remedies for steering too late during right reverse parking: If the steering is only slightly late, turning the steering wheel to the full lock may allow the vehicle to avoid pressing the corner of the parking space and park accurately. However, if the steering is too late, even with the steering wheel turned to the full lock, the left rear wheel will still press the corner of the parking space, and there is no remedy in this case. Methods to judge the steering: Observe the distance between the vehicle body and the corner of the parking space in the right rearview mirror, and you will notice this distance gradually narrowing. If you find that continuing to reverse with the current steering angle prevents the right rear wheel from entering the parking space, it indicates that the steering was applied too early. If you notice that when the right rear wheel is about to approach the corner of the parking space, the distance between the vehicle body and the corner is far more than 30cm, it indicates that the steering was applied too late.
20
2
Share

What Are the Signs of a Damaged Clutch Fork?

Clutch fork damage is indicated by difficulty or inability to engage gears in the transmission. Below are the specific manifestations of fork damage and methods for clutch maintenance: Specific manifestations: bending or deformation of the fork; cracks or fractures in the fork; damage to the fork pin; detachment of the fork from the fork shaft, etc. Clutch maintenance: Regularly check the fluid level in the clutch reservoir. If it is below the MAX mark, add fluid accordingly. Depress the clutch pedal and check for the following issues: weak pedal rebound, abnormal clutch noises, excessive looseness or heaviness of the clutch pedal. If any of these issues are found, the vehicle should be sent for repair as soon as possible. Inspect the clutch hydraulic control mechanism for leaks. Check the master cylinder, hydraulic lines, and working cylinder for traces of clutch fluid. If oil stains or rust are found on the clutch disc or pressure plate, clean them with gasoline and reinstall after drying. If the friction lining shows exposed rivet heads, cracks, burn marks, or if the lining thickness is less than 3.4mm, the clutch friction disc should be replaced. When operating the clutch, follow the principle of 'quick-slow-link': quickly lift the pedal at the beginning, slow down when the clutch starts to engage, and gradually lift the pedal until full engagement. While lifting the clutch pedal, gradually press the accelerator pedal according to the engine load to ensure a smooth start.
18
1
Share

How to Remove Overspray from Car Body Using White Vinegar?

White vinegar is acidic and can also damage the car paint, so it is not advisable to use white vinegar for removal. Other methods to remove overspray: Before it dries, you can use a tar remover to wipe it off. Most auto repair shops use this product. Spray it for a moment, and it can be easily wiped clean. The effect is really good. It can quickly and effectively penetrate, dissolve, and remove stubborn stains like adhesive residue and asphalt (tar) from hard surfaces without damaging the paint's gloss. For past sludge, automotive detailing clay, which originated in Japan, can be used. First, pour water onto the car's surface paint, then repeatedly rub the detailing clay over it. Within seconds, you will notice that the rubbed area becomes smooth and the color enriched. For paint surfaces, you can use masking sandpaper for grinding, followed by polishing. For glass, use a thinner to wipe or gently scrape off with a blade. Paint on glass is generally easy to remove; just wipe it off with the thinner used by painters, which is available at any paint store. Introduction to Automotive Paint: Automotive paint is a protective film sprayed onto cars, a type of coating that makes the car body less susceptible to corrosion and also gives an aesthetic appeal. Different automotive paints have different effects, and the quality of the paint itself, along with the technique and a good painting environment, is crucial.
20
3
Share

What material is the Cadillac CT6 body made of?

Cadillac CT6 body is made of aluminum alloy material. More details about the Cadillac CT6 are as follows: 1. The new Omega rear-wheel-drive platform features a sealed steel underbody shield to enhance the vehicle's quiet performance. 2. It is equipped with Cadillac's latest 3.0L twin-turbocharged engine, paired with a newly developed 8AT transmission. 3. The Cadillac CT6 has body dimensions of 5184/1879/1472mm (length/width/height). 4. The exterior design borrows some concepts from the Elmiraj concept car, featuring a flatter and wider shield-shaped grille with strong layering. The headlights have an aggressive design, combined with Cadillac's classic diamond-cut design elements, giving the front face a very dynamic look. On the side, the CT6's body lines are smooth, with two waistlines that enhance the visual sportiness. 5. In terms of features, it includes a 10.2-inch large CUE human-machine interaction screen with 1028*720 high-pixel display, and a touchpad on the central console for controlling CUE functions. It also offers wireless phone charging, an OnStar 4G LTE system with Wi-Fi hotspot, a four-zone air conditioning system with ion air purification, automatic parking assist, welcome lighting, hands-free trunk opening, infrared night vision system for detecting people and animals at night, and a pedestrian collision prevention system.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.