···
Log in / Register

How many points are deducted for reversing at a traffic light intersection?

3 Answers
ReidLynn
09/08/25 7:44am
Reversing at a traffic light intersection results in a deduction of 3 points. Below is relevant information about reversing: Precautions: Whether you are a novice or an experienced driver, this is a crucial point to note. Not only should you avoid pressing the accelerator while reversing, but you should also avoid half-pressing the brake. Especially for beginners, reversing should be done at a speed slower than idle speed. This allows more time to observe the surrounding environment. Basic essentials: When parking in a parking lot, first, visually assess the width of the parking space, check for any obstacles behind, whether there are vehicles parked on either side, and whether the length is suitable for your vehicle type. If visibility is poor at night, step out to observe the exact position before reversing.
Was this review help?
16
5
Share
LilaAnn
09/20/25 6:09am
I remember when I was first learning to drive, I once saw someone reversing at an intersection, and the traffic police came over and immediately deducted 3 points and fined them 200 yuan. Reversing at a traffic light intersection not only results in points deduction but is also extremely dangerous, as it can easily lead to collisions with vehicles behind or pedestrians, especially during peak hours in the morning and evening. Traffic laws stipulate that this is a violation, with a fixed penalty of 3 points deducted. Don't think it's just a minor issue; running a red light also results in a 6-point deduction each time. When parking, if the green light isn't on, wait patiently and don't move recklessly. Safety is much more important than saving time. After learning my lesson, I've developed a habit of never reversing at intersections to avoid accidents and unnecessary expenses.
Was this review help?
4
3
Share
Expand All
ColtonLee
11/03/25 6:33am
After driving for so many years, I really think reversing at traffic lights shouldn't be allowed. It'll cost you a full 3 points on your license, and you might even get fined 200 yuan, depending on local regulations—but the risks are too high. When reversing, visibility is poor, and if the car behind can't brake in time, a rear-end collision is likely, hurting yourself and affecting others. Nowadays, cameras are everywhere at intersections, and they'll catch you every time—don't count on luck. When driving normally, just wait properly for the green light before moving—it's worry-free and safe. Develop good habits; road safety comes first.
Was this review help?
1
5
Share
Expand All
More Forum Discussions

How Long Are Tires Considered Stock?

Tires older than one year are considered stock. There is a set of numbers on the tire sidewall, where the last four digits represent the manufacturing date—the first two digits indicate the week of the year, and the last two digits represent the year. Tires are circular elastic rubber products mounted on various vehicles or machinery for rolling contact with the ground, with a normal pressure range of 2.2 to 2.5 bar. The functions of tires are: 1. To prevent severe vibrations and early damage to vehicle components, adapt to high-speed performance, and reduce driving noise; 2. To support the entire weight of the vehicle, bear the load, and transmit forces and moments in other directions; 3. To transmit traction and braking torque, ensuring good adhesion between the wheel and the road surface to improve the vehicle's power, braking, and off-road performance.
11
2
Share

What Causes the Engine to Stall When Pressing the Clutch?

The reasons for the engine stalling when pressing the clutch are: 1. Poor operation of the engine's idle speed control system; 2. Dirty electronic throttle or idle speed adjustment valve; 3. Unstable mixture control. The clutch is located within the flywheel housing between the engine and the transmission, with the clutch assembly secured to the rear plane of the flywheel using screws. The output shaft of the clutch serves as the input shaft of the transmission. Precautions for using the clutch include: 1. The clutch must be thoroughly cleaned before installation to remove anti-rust grease and debris; 2. The clutch can be installed coaxially or on separate shafts, but axial fixation is mandatory; 3. For wet electromagnetic clutches, lubricating oil must be added between the friction plates during operation; 4. The power supply and control circuits must be properly connected, with the clutch requiring a 24V DC power supply; 5. When installing a jaw-type electromagnetic clutch, ensure there is a certain gap between the end face teeth to prevent grinding during idle rotation.
18
3
Share

How to turn on the high beam of Audi Q5?

Audi Q5's high beam can be turned on by following these steps: 1. Start the vehicle engine and rotate the headlight switch three times to the right, pointing to the light symbol; 2. Push the dimmer lever forward to activate the high beam. The Audi Q5 is a mid-size SUV under the Audi brand. Taking the 2018 Audi Q5 Classic Edition Progressive as an example, its body dimensions are: length 4629 mm, width 1898 mm, height 1655 mm, with a wheelbase of 2807 mm. The 2018 Audi Q5 Classic Edition Progressive is equipped with a 2.0T turbocharged engine, with a maximum torque of 350 N·m and a maximum torque speed range of 1500 to 4200 rpm, paired with an 8-speed automatic manual transmission.
5
3
Share

What Causes the Clicking Sound When Starting the Car at Low Speed?

The reasons for the clicking sound when starting the car at low speed are: 1. Due to the transmission oil operating in high-temperature and high-pressure environments, a lot of sludge and impurities are produced, causing the transmission oil to thicken and reducing its fluidity. This results in direct friction between components without a protective layer, exacerbating mechanical wear and causing abnormal noise; 2. The transmission oil needs to be replaced. The correct method for starting the car is: 1. Insert the key and keep it in the LOCK position for about 2 seconds; 2. Turn it to the ON position and wait for about 5 seconds for the car's computer self-check; 3. Turn the key to the START position to ignite, and release the key after starting; 4. Let the car warm up in place for 30 seconds to about 1 minute; 5. Press the brake, shift to D gear, then release the handbrake and foot brake to start.
19
2
Share

Are Vehicle Inspection Stations Closed on Weekends?

Generally, the regular working hours of vehicle inspection stations are from Monday to Friday. In some regions, as the vehicle management offices also operate normally on weekends, many vehicle inspection stations have also started to operate normally on weekends. Whether the inspection stations are open on Saturdays and Sundays needs to be confirmed with the local vehicle inspection station. The Purpose of Annual Inspection: The purpose of the annual inspection is to check the quality of the vehicle and whether all aspects of the vehicle meet the relevant regulations for road driving, mainly to ensure the safety of vehicle operation, and also to provide a guarantee for the safety of the driver. Precautions for Vehicle Annual Inspection: Vehicles should undergo annual inspection within three months before the expiration of the motor vehicle inspection validity period. According to relevant laws and regulations, the owner of the motor vehicle must first handle any related traffic violations or accidents before applying for the annual inspection of the motor vehicle in accordance with the legal procedures.
14
4
Share

Why Has Blue Shell Changed to Fully Synthetic?

Blue Shell has changed to fully synthetic due to technological upgrades. Shell Helix automotive engine oils include: Shell Helix fully synthetic lubricants, Shell Helix synthetic technology lubricants, and Shell Helix multi-grade lubricants. Technical characteristics of Blue Shell: The premium product in the Shell Helix family of fully synthetic lubricants is manufactured from fully synthetic base oils and high-performance additives. These base oils utilize Shell's leading PurePlus technology, which helps extend engine life, reduce maintenance costs, lower fuel consumption, improve fuel economy, and better maintain engine cleanliness. Shell Helix has gained recognition and recommendations from numerous automotive manufacturers in the Chinese lubricant market, including Ferrari, Rolls-Royce, BMW, Mercedes-Benz, Volkswagen, Maserati, JEEP, Hyundai, and Geely.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.