···
Log in / Register

How many points are deducted for parking less than 30 centimeters from the curb in Subject 3?

4 Answers
LeSteven
07/30/25 2:00am

Parking less than 30 centimeters from the curb in Subject 3 is considered passing and does not result in point deductions. Below is information about the Subject 3 exam: 1. Content of the Subject 3 exam: The road driving skills test for Subject 3 generally includes: pre-driving preparation, simulated lighting test, starting, driving straight, gear shifting operations, changing lanes, parking by the curb, driving straight through intersections, turning left at intersections, turning right at intersections, crossing pedestrian crosswalks, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and nighttime driving. 2. Notes for the Subject 3 exam: During the exam, remain calm and composed. Do not let nervousness affect your gear shifting and lighting operations, and avoid losing points on the simplest procedures. Practice is the key to passing the Subject 3 exam. During practice, observe carefully and handle external factors flexibly to ensure a flawless performance during the actual exam.

Was this review help?
7
4
Share
VanAdaline
08/15/25 7:57am

I remember paying special attention to the point-deduction rules when preparing for Subject 3 of the driving test. Parking within 30 cm from the curb does incur penalties. According to the regulations, parking 10-30 cm from the roadside directly deducts 10 points, while less than 10 cm is acceptable, but exceeding 30 cm also results in point deductions. This rule ensures safety by preventing scrapes or traffic disruptions. I was quite nervous back then and mastered alignment techniques through repeated practice, such as checking wheel position via side mirrors. It's helpful to simulate real road conditions regularly and practice precision parking in open spaces. The driving test has a total score of 100, with 90+ required to pass, so even a minor mistake could lead to failure. Other common pitfalls like starting off or turn signals require caution—familiarizing yourself with the test route beforehand and maintaining a calm mindset is advisable. In short, point deductions carry significant weight, emphasizing prevention and solid training.

Was this review help?
2
0
Share
Expand All
AngeloLee
10/21/25 3:44am

As someone who has taught many students, I've found that pulling over is a common point of failure in the third driving test. The standard rule is a 10-point deduction for being less than 30 centimeters from the curb. The exact deduction depends on the examiner's measurement: definitely 10 points off for 10 to 30 centimeters, and no deduction for less than 10 centimeters. The key is to develop good habits and adjust your position immediately after stopping. During practice, use reference points like the distance between the tire edge in the rearview mirror and the curb. Also, remember to slow down smoothly before stopping to avoid sudden braking causing other issues. Actually, the third test is scored out of 100, with 90 needed to pass. There are many point deductions, such as 10 points for stalling at startup, so a 10-point deduction for pulling over can easily add up to failure. Practice and take the test more, and you'll naturally get the hang of it—don't lose sight of the big picture over small mistakes.

Was this review help?
4
5
Share
Expand All
BrynleeLynn
12/04/25 4:12am

I just passed the road test (Subject 3) a few days ago, and I personally experienced the 10-point deduction for parking within 30 cm from the curb. The rule is clear: parking 10-30 cm away deducts 10 points, and you must keep it within 10 cm to be safe. During the test, I nearly made a mistake but was saved by my instructor's reminder to check the right wheel. In practice, we used cones to simulate the curb, and it became much easier once I got the feel. Though this deduction seems minor, it's crucial—with a total score of 100 and a passing mark of 90, every point counts. I recommend beginners spend more time practicing parking skills rather than focusing solely on straight-line driving. After a few weeks of practice, your confidence will grow.

Was this review help?
16
2
Share
Expand All
More Forum Discussions

how to disconnect gps on car

Disconnecting a GPS tracker from your car is a serious action with significant legal implications. In most cases, it is illegal to disable a GPS device you do not own, such as one installed by a lender, leasing company, or as part of a court order. If you own the vehicle and the tracker outright, the process varies by model but generally involves locating the device, which is often wired into the vehicle's power behind the dashboard or under a seat, and unplugging it. Before taking any action, it is critical to determine who owns the tracker and why it is there. Tampering with a device installed by a bank for a car loan or a leasing company constitutes a breach of contract and could lead to repossession or legal action. Similarly, removing a court-ordered tracking device is a serious criminal offense. If you have a legitimate reason to disable a tracker you own—for instance, privacy concerns during personal use—the steps are technical. You must first locate the device. Common hiding spots include: Under the dashboard: Check near the OBD-II port (the connector mechanics use for diagnostics). Under the seats: Look for magnetic or hardwired boxes. In the glove compartment or center console. Within the trunk or spare tire well. Once found, if it's a plug-and-play model, you can simply unplug it. If it's hardwired, you may need to disconnect your car's battery for safety and then carefully disconnect the wires from the device. Improperly disconnecting a hardwired unit can cause electrical shorts or damage to your vehicle's electronics. For modern vehicles with integrated telematics systems (like OnStar or BMW Assist), completely disabling location tracking is extremely complex and may not be fully possible without impairing other vehicle functions. The safest and most legally sound approach is always to consult your vehicle's ownership documents and seek professional advice.
15
2
Share

how to check car for recalls

The fastest and most reliable way to check for recalls on your car is to use your Vehicle Identification Number (VIN) on the official website of the National Highway Traffic Safety Administration (NHTSA). Recalls are tied to the VIN because it identifies the specific vehicle and its manufacturing details, ensuring you get accurate information for your exact car. A recall is a safety-related defect or non-compliance with a motor vehicle safety standard, and the manufacturer is required to fix the problem at no cost to you. Your 17-digit VIN can be found on the driver's side dashboard (visible through the windshield), on the driver's side door jamb sticker, or on your vehicle's title and insurance documents. Here are the steps to check: Go to the NHTSA's Recalls Look-up Tool: . Enter your VIN. The tool will display any unrepaired recalls specific to your vehicle that were issued in the last 15 calendar years. You can also check the manufacturer's website directly. Most major automakers have a dedicated recall lookup page on their customer site. This is equally authoritative. If a recall is found, contact a local dealership for your car's brand to schedule a repair appointment. The fix is always free. It's wise to check for recalls periodically, not just when you buy a car. Manufacturers occasionally announce new recalls for older models. To illustrate the scope, here is data on recent recalls from a major automaker. Recall ID Model Years Affected Component Potential Issue Vehicles Potentially Affected (U.S.) 24V-301 2022-2024 Fuel Pump Control Module Module may fail, causing engine stall while driving. 136,000 23V-855 2020-2023 Side Curtain Airbag Sensor may cause airbag to deploy inadvertently. 82,500 23V-702 2021-2022 Rearview Camera Display Image may not display, reducing rear visibility. 48,200 24V-102 2023 Battery Cable Cable may not be secured, posing a fire risk. 18,750 23V-951 2018-2021 Power Seat Motor Motor can overheat, increasing fire risk. 256,000
8
4
Share

how to connect woofer in car

Connecting a woofer to your car's audio system primarily involves three methods: using a line output converter (LOC) with a factory stereo, connecting directly to an aftermarket head unit with preamp outputs, or opting for a powered subwoofer that simplifies the process. The safest and most common approach for a stock stereo is the LOC, which taps into your rear speaker wires to create a low-level signal for an external amplifier. This amplifier then powers the woofer. For a clean installation, you'll need a wiring kit, basic tools, and about 1-2 hours. The first step is always disconnecting the car's battery to prevent electrical shorts. Next, you'll run a power cable from the battery's positive terminal through the firewall to the trunk, ensuring it's fused within 18 inches of the battery. The location of your amplifier dictates the rest of the wiring. You'll need to run RCA cables (from the LOC or head unit) and a remote turn-on wire alongside the power cable, keeping them separated to avoid engine noise. For the signal, locate the wires for the rear speakers. A line output converter is crucial here. It connects to these speaker wires, converting the high-level signal into a low-level RCA signal that your amplifier can use without distortion. After connecting the LOC to the amp, and the amp to the woofer, you reconnect the battery to test the system before securing all components. Component Purpose Key Consideration Line Output Converter (LOC) Converts speaker wire signal to RCA signal Essential for factory stereos without RCA outputs Amplifier Wiring Kit Provides power, ground, and signal cables Kit gauge (e.g., 8-gauge) must match amplifier's power requirements Amplifier Powers the subwoofer Ensure its RMS power rating matches the woofer's for optimal performance In-Line Fuse Protects the electrical system from shorts Must be installed near the battery connection Remote Turn-On Wire Tells the amplifier when to turn on Typically connected to a "remote" or "amp turn-on" wire in the stereo harness Tuning is the final step. Set the amplifier's gain control low initially, then adjust the bass boost and low-pass filter to blend the woofer smoothly with your main speakers, avoiding overpowering bass.
7
3
Share

how to color match paint car

The most reliable way to color match paint for your car is to find the factory paint code and have a professional automotive paint supplier mix a custom batch. This code is your vehicle's fingerprint for color, ensuring a near-perfect match. While DIY options like scratch pens and aerosol cans from auto parts stores offer convenience for tiny chips, they often fall short for larger panels due to subtle color variations caused by sun exposure and age. Finding Your Paint Code This is the critical first step. The paint code is typically located on a sticker in the driver's side door jamb, inside the glove compartment, or under the hood. It's usually a combination of letters and numbers (e.g., "WA-8624"). If you can't find it, your car's dealer can look it up using your VIN. Once you have the code, take it to a specialized automotive paint store. They use sophisticated systems to match the code to the exact formula from the manufacturer's database. Factors That Complicate Matching Even with the correct code, achieving a seamless blend can be challenging due to metallic flake alignment and color fade . The sun fades paint over time, so the color on your car's roof may be slightly different from the color on a door that was replaced years ago. For repairs on large, continuous sections like a hood or door, professional painters often blend the new paint into the adjacent panels to create a gradual transition that the eye perceives as a perfect match. Methods and When to Use Them Method Best For Cost (Approx.) Accuracy Skill Level Required Paint Code Mix Panel repairs, large scratches $50 - $200+ Excellent Intermediate to Pro Professional Spray-Out & Scan Older cars with significant fade $100 - $300 Very Good to Excellent Pro Pre-Mixed Aerosol Can Small stone chips, minor scratches $15 - $30 Fair to Good Beginner Touch-Up Paint Pen Pinpoint scratches, tiny chips $10 - $20 Fair Beginner For the best results on anything beyond a minor chip, lightly sand the area to feather the edges, apply a primer if you've sanded down to bare metal, and then use several light, misting coats of paint instead of one heavy coat. Always finish with a clear coat to protect the new paint and blend the gloss level with the rest of the car.
7
5
Share

how to deal with car dealers

The most effective way to deal with car dealers is to enter the negotiation fully prepared. This means securing outside financing pre-approval, knowing the vehicle's invoice price (what the dealer paid), and understanding available rebates. Your goal is to negotiate the final out-the-door price, not the monthly payment, to avoid being upsold on unnecessary add-ons. A successful transaction hinges on research, patience, and a willingness to walk away if the deal isn't right. Before you even step onto the lot, your homework should be done. Use online resources to research the True Market Value (TMV) or fair purchase price for the exact model and trim you want. This information, available on sites like Edmunds or Kelley Blue Book, is powered by real-world sales data and gives you a strong factual basis for negotiation. Focus all discussions on the final, total price you will pay, often called the "out-the-door" price. This includes all taxes, registration, and fees. Dealers may try to shift the conversation to monthly payments, which can be manipulated with longer loan terms to hide a higher overall cost. Politely insist on settling the total price first. Financing is a major profit center for dealers. The best strategy is to get pre-approved for a loan from your bank or credit union before you shop. This gives you a baseline interest rate to compare against the dealer's financing offer. Sometimes, the dealer can beat your rate, especially with manufacturer-sponsored incentives. Be prepared for the "finance and insurance" (F&I) manager's office. This is where they will present extended warranties, paint protection, and other products. While some, like GAP insurance , can be valuable, they are often significantly marked up. Evaluate these offers carefully and don't feel pressured to buy them on the spot. Negotiation Tactic Dealer's Common Counter Your Prepared Response Offering a price based on invoice "That doesn't include our holdback and dealer fees." "I'm focused on the final out-the-door price that includes all your profit." Showing a competing dealer's quote "I'm sure I can match or beat that." "Great, let's see the written offer that beats their total price." Declining an extended warranty "This is vital protection for your expensive investment." "I've considered it, and I'll decline at this time. Let's proceed with the base agreement." Noticing unexpected fees "All dealerships charge these documentation fees." "I understand doc fees, but I need a line-item explanation for each of these charges." Hesitating on the final offer "This price is only good for today." "I need time to think it over. I have your card and will contact you tomorrow." The most powerful tool you have is your ability to leave. If the numbers aren't adding up, or if you feel pressured, thank the salesperson for their time and walk out. This often leads to a follow-up call with a better offer. Remember, you are the customer in control of the purchase.
7
1
Share

how to dig a car out of snow

To dig a car out of snow safely and effectively, you need the right tools and technique. The core process involves clearing snow from the exhaust pipe and around the tires first, creating a path, and using gentle accelerator pressure with a rocking motion if stuck. Avoid spinning your tires, as this melts snow into ice and buries you deeper. Essential Tools to Keep in Your Trunk A small folding shovel is the single most important tool. A sturdy ice scraper, a bag of sand or non-clumping cat litter for traction, and a flashlight are also crucial. Having these items ready before a storm is the best preventative measure. Step-by-Step Dig-Out Procedure Start with the Exhaust Pipe: Clear any snow blocking the tailpipe immediately to prevent deadly carbon monoxide from backing up into the vehicle. Clear the Wheel Wells: Packed snow in the wheel wells creates friction. Remove it by hand or with your shovel. Dig a Path: Clear snow from the front and rear of all four tires. Create a path in the direction you want to go, about 10-15 feet long if possible. The goal is to give the car a runway to gain momentum. Gain Traction: Spread your sand or cat litter in front of and behind the drive wheels (the wheels that receive power from the engine). For front-wheel drive, that's the front tires; for rear-wheel drive, it's the back tires. The Right Way to Use the Accelerator Engage your car's winter mode if it has one, or put an automatic transmission in "D2" or "Low" to reduce torque. Gently press the accelerator as if you're trying to walk on ice. If the car doesn't move, switch between Drive and Reverse to rock the car back and forth, gaining a little more momentum with each rock. Never floor the gas. Traction Aid Comparison Material Pros Cons Best For Sand / Kitty Litter Provides grit for traction, adds weight Can be messy, may freeze solid All situations, especially icy patches Traction Mats Excellent grip, reusable Can be expensive, must be stored Deep snow, getting initial movement Car Floor Mats Immediately available Can be damaged or shot out from tire Emergency use only when stuck Salt Melts ice Damages concrete, harmful to environment Icy surfaces after car is freed If you're deeply stuck or on an incline, don't waste fuel and risk overheating the engine. Call for help. The key is patience and deliberate, gentle actions.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.