···
Log in / Register

How many points are deducted for not using the turn signal during a right-angle turn?

4 Answers
VanAubrey
08/31/25 7:08am

Failure to use lights as required, such as not using the turn signal when turning, results in a deduction of 1 point from the driver's license. In the Subject 2 driving test, not using the turn signal when turning deducts 10 points. Here is some information about using turn signals: 1. Subject 2 Test: In the Subject 2 driving test, incorrect use of the turn signal or not using it at all deducts 10 points. Additionally, turning within less than 3 seconds after activating the turn signal when starting, turning, changing lanes, overtaking, or parking also deducts 10 points. 2. On-road Driving: When the green arrow signal for a lane is on, if a vehicle does not pass through the intersection in the direction indicated by the lane, it is considered "failing to enter the guiding lane in the required direction." Changing lanes without activating the turn signal is considered "failure to use lights as required."

Was this review help?
7
4
Share
StKeira
09/13/25 3:28am

Back when I was taking my driving test, I forgot to turn on the indicator during the 90-degree turn, and the instructor immediately deducted 10 points, which gave me a real scare! Luckily, I didn’t make any mistakes in other sections, and I barely passed with a total score of 87. The test is scored out of 100, with a passing mark of 80—losing 10 points could have meant failure. Using the turn signal during a 90-degree turn is super important because it alerts pedestrians and other drivers to your intention to turn, helping avoid collisions. Before every test, the instructor would emphasize that signaling must be precise—doing it too early or too late could cost you points. In everyday driving, while there’s no examiner to penalize you for not signaling, police can issue fines of 200 yuan or more, and it might even lead to minor accidents. I’d advise new drivers to make it a habit during practice—don’t treat it as a small thing. Safe driving starts with the details, and proper turn signals make road conditions much smoother.

Was this review help?
16
2
Share
Expand All
MacHannah
10/27/25 4:13am

As someone who has driven for many years, failing to use the turn signal during a 90-degree turn will definitely deduct 10 points in the driving test. This is a clear rule in Subject 2 of the driving exam, where the total score is 100, and losing 10 points puts you on the edge. Not signaling means neglecting safety warnings—sharp turns have limited visibility, and signals alert other drivers or pedestrians. The exam system monitors the timing of the signal switch; turning it on too early or too late also results in deductions. In daily driving, I’ve seen many overlook this—city roads have many turns, and once, not signaling nearly caused a rear-end collision. Remember, signaling is basic courtesy—deductions in the exam are minor, but real-life violations carry heavier consequences. Develop the habit of signaling every turn—not just for the test, but to protect yourself. Good habits last a lifetime.

Was this review help?
5
4
Share
Expand All
KimberlyMarie
12/10/25 4:29am

Generally, failing to use the turn signal during a right-angle turn in the driving test deducts 10 points. With a total score of 100 and a passing mark of 80, this deduction could lead to failure. Having driven for over a decade, I deeply understand the necessity of signaling—turn signals at intersections are the first line of safety. While skipping the signal during the test might seem minor, on the road, it could result in fines or accidents. With more practice, it becomes second nature.

Was this review help?
18
4
Share
Expand All
More Forum Discussions

Which manufacturer produces MG?

MG is produced by SAIC Motor Corporation, a car brand originating from the UK, founded by William Morris. MG's vehicle lineup includes models such as the MG6, MG ZS, and MG GS. Taking the MG ZS as an example, it is positioned as an SUV model. In terms of body dimensions, the MG ZS measures 4313mm in length, 1809mm in width, and 1648mm in height, with a wheelbase of 2580mm. Exterior-wise, the MG ZS features a large front grille with a sculpted three-dimensional effect, seamlessly integrated into the rapidly descending front end, tightly connecting with the upper and lower surfaces. The body design boasts clean, sharp lines, with chrome accents on the side skirts and window edges. The wheels adopt a five-spoke design, exuding a sporty feel.
6
0
Share

What engine and transmission does the Lynk & Co 03 use?

Lynk & Co 03 uses high and low power 1.5T three-cylinder engines, paired with a 6-speed manual or 7-speed dual-clutch transmission. An engine is a machine that converts other forms of energy into mechanical energy, originating in the UK. It can refer to both the power generation device and the entire machine including the power unit. The Lynk & Co 03 is a model under the Lynk & Co brand, with body dimensions of 4658mm in length, 1840mm in width, and 1459mm in height. In terms of exterior design, the Lynk & Co 03 features split-type headlights and a horizontal grille, maintaining a high similarity to the Lynk & Co 03 concept car. Additionally, the body styling continues the concept car's design, particularly the slightly sloping C-pillar design.
11
5
Share

How to Repair Auto Body Sheet Metal?

Auto body sheet metal repair methods: The puckering method is used to repair stretched and deformed areas. During the repair process, some puckers are created in the stretched and deformed areas. The puckered areas will be slightly lower than the surrounding areas. Fill them with putty, then smooth them with a file and repaint. The heat shrinking method involves heating the area that requires sheet metal repair. When the temperature rises, the steel plate expands outward, creating stress on the surrounding areas. As the temperature continues to rise until the metal softens, the surrounding steel plate will restore its original shape. Auto body sheet metal repair is a technical method in auto repair. In this context, auto body sheet metal repair refers to the repair of the car body after a collision, encompassing all tasks except for the anti-corrosion and decorative painting work on the car body.
17
0
Share

Should the Mercedes-Benz C200 use 92 or 95 octane gasoline?

According to the official vehicle manual recommendation, the Mercedes-Benz C200 should use 95 octane gasoline. In addition to checking the appropriate gasoline grade in the vehicle manual, the Mercedes-Benz C200 can also refer to the label on the fuel tank cap, which will indicate the recommended grade. Typically, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with a compression ratio between 8.6-9.9 should use 92 octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95 octane gasoline. However, with the application of new technologies, the compression ratio alone cannot determine the gasoline grade, as high-compression engines can also be tuned to use lower-octane gasoline. This is because, besides the compression ratio, other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline octane rating, the higher the octane value and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. If the wrong gasoline grade is used occasionally, simply switch back to the correct grade after consumption. However, prolonged use of the wrong gasoline grade can have the following effects: For vehicles designed for lower octane gasoline, using a higher octane grade will not cause damage, but the increased octane value may alter the fuel's ignition point, leading to delayed combustion in the engine. This reduces the engine's power output and thermal efficiency, resulting in poorer performance. For vehicles designed for higher octane gasoline, using a lower octane grade can cause engine knocking. Due to the significantly lower octane value, the fuel may ignite prematurely during the compression stroke, creating resistance before the spark plug fires. This resistance makes the engine run very unstably. Mild knocking may only increase noise without significant engine damage, but severe knocking indicates serious engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, and in extreme cases, cylinder scoring.
12
3
Share

Which country does the Excelle belong to?

The Excelle is manufactured in China and belongs to an American brand. Here are the specific details: 1. The Excelle is a joint venture product between SAIC and General Motors (USA). Based on the exterior design of the Excelle XT, the new Excelle embodies Buick's "dynamic and smooth" design language, drawing inspiration from the classic elements of the Riviera concept car. 2. The Excelle is a meticulously crafted perfect vehicle tailored for individuals who pursue a quality lifestyle. It not only possesses the sharp and exhilarating power control of European lineage but also pioneers a dynamic and elegant exterior and interior design that aligns with Chinese aesthetic trends, surpassing the robustness that Japanese models cannot match.
17
1
Share

What is the function of a car dashboard?

The function of a car dashboard: It is a device that reflects the working conditions of various systems of the vehicle. It mainly includes fuel indicator lights, washer fluid indicator lights, electronic throttle indicator lights, front and rear fog light indicator lights, and warning lights, allowing real-time monitoring of the car's status. The car dashboard is a device that reflects the working conditions of various systems of the vehicle. Conventional car dashboards typically include a speedometer, tachometer, oil pressure gauge, water temperature gauge, fuel gauge, and charging gauge. The car dashboard serves as an important interface for communication between the driver and the vehicle. With the advancement of automotive electronic technology, the amount of information about the vehicle's driving conditions and the status of various mechanisms and components has significantly increased. While driving, the driver must be more aware and promptly informed about whether various parameters of the car and engine are normal, in order to take timely measures to prevent accidents.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.