How many points are deducted for not using lights correctly when a vehicle breaks down on the road?

1 Answers
MacIker
07/29/25 10:25pm
Not using lights correctly when a vehicle breaks down on the road will result in a deduction of 3 points. Failure to use warning lights as required: After a vehicle is involved in an accident on the road, if it obstructs traffic and is difficult to move, and the warning lights are not used as required, a fine will be imposed and 3 points will be deducted. Failure to use lights correctly when passing through an intersection: When a motor vehicle passes through an intersection controlled by traffic signals without using the lights as required, a fine will be imposed and 1 point will be deducted. Failure to use lights correctly when changing lanes: When a motor vehicle changes lanes without using the lights as required, resulting in an accident, a fine will be imposed and 1 point will be deducted. Please strictly use lights when changing lanes.
Was this review help?
9
2
Share
More Forum Discussions

Which province does Jin O belong to?

Jin O is the license plate for vehicles in Shanxi Province, specifically designated for public security vehicles of the Shanxi Provincial Public Security Department. The license plate codes for various regions in Shanxi Province are as follows: Jin A for Taiyuan City, Jin B for Datong City, Jin C for Yangquan City, Jin D for Changzhi City, Jin E for Jincheng City, Jin F for Shuozhou City, Jin H for Xinzhou City, Jin J for Lvliang City, Jin K for Jinzhong City, Jin L for Linfen City, and Jin M for Yuncheng City. Notes for license plate installation: 1. License plate position: The front plate should be installed in the middle or right side of the front, and the rear plate should be installed in the middle or left side of the rear; 2. Installation requirements: Special sealing devices for motor vehicle license plates must be used, ensuring all seals are complete and the plate is securely installed; 3. Requirements for plate holders: The inner edge of the license plate frame should be more than 5 millimeters away from the edge of the motor vehicle number characters.
8
2
Share

How often should a sedan be started if it is not driven for a long time?

A sedan that is parked for an extended period should be started every one to two weeks. After starting, engage the gear and drive a certain distance, which not only charges the battery but also checks for any abnormal phenomena in the engine. When a sedan is parked for a long time, only one point of the tire is in contact with the ground, which can easily lead to flat spots on the tire surface, shortening the tire's lifespan. Additionally, the oil in the engine and transmission cannot circulate, leading to oxidation and rust inside the components, which may require repair or replacement. Regularly starting the car and driving a short distance allows the oil to circulate and lubricate the internal components of the engine and transmission, preventing damage. Regularly starting a long-term parked sedan helps maintain the vehicle in good condition. If conditions do not permit, the car battery can be removed to prevent it from losing charge over time. Moreover, after starting the car, it is advisable to warm it up for about 10 minutes to ensure all engine components are adequately lubricated, avoiding damage caused by excessive friction.
5
2
Share

Does a Dashboard Mat Affect Airbag Deployment?

The driver's airbag is typically located at the center of the steering wheel, so a dashboard mat does not interfere with its deployment. However, the passenger airbag is usually positioned above the glove compartment, which is precisely where the dashboard mat covers. In the event of a collision, this can significantly hinder the passenger airbag's deployment, posing a major safety hazard. Therefore, it is advisable to avoid covering the passenger side. Airbags deploy through pre-designed openings in the dashboard, and the mat may be flung outward upon deployment. At speeds of 60 km/h, this could potentially endanger occupants. A dashboard mat can also delay the airbag's deployment speed by milliseconds during a collision, which can be critical in determining the driver's survival. Additional information: The electronic control safety airbag system is a passive safety protection system that, when used in conjunction with seat belts, provides effective collision protection for occupants. In automobile collisions, airbags can reduce head injuries by 25% and facial injuries by approximately 80%.
1
4
Share

Should You Use High Beams or Low Beams When Driving on the Highway at Night?

You should use high beams when driving on the highway at night. The faster the driving speed, the greater the requirement for the driver's visibility distance. Turning on the high beams allows the driver to see farther, preventing accidents caused by not seeing obstacles, pedestrians, or oncoming vehicles while driving at high speeds. Light selection on the highway: Under normal weather conditions, fog lights should not be turned on, whether during the day or at night. Additionally, when meeting oncoming vehicles on roads without dividers, you should slow down at a distance of about 150 meters and switch from high beams to low beams. If the oncoming vehicle does not switch to low beams, the driver should slow down and use the method of alternating between high and low beams to signal the oncoming driver. If the oncoming driver still does not switch lights, simply continue driving in your lane. Scenarios requiring high beams: When unfamiliar with the road and needing to read road signs or other indicators, high beams can be used but should quickly be switched back to low beams. When overtaking another vehicle, the left turn signal should be activated in advance, and the driver should alternate between high and low beams or use the horn to alert the vehicle ahead to yield.
3
3
Share

What are the signs of poor tire grip?

Tire grip is primarily influenced by factors such as the tread pattern, tread depth, road surface conditions, and vehicle load. Weak adhesion between the tires and the road can lead to vehicle slippage. Improving grip can be achieved by increasing friction and expanding the contact area between the tires and the road. Below are specific methods to enhance tire grip: Increasing Friction: Enhance the road's friction coefficient, which refers to the road's ability to provide traction for the tires. A higher friction coefficient results in greater traction. Different road surfaces, such as asphalt, concrete, and gravel, have varying friction coefficients, each offering different levels of tire grip. Additionally, increasing the tire's own friction coefficient can be achieved by opting for softer tires. Softer tires provide stronger grip but tend to wear out faster. Expanding the Contact Area Between Tires and Road: The simplest method is to switch to wider tires. Another approach is to choose tires with fewer tread patterns, which increases the actual contact area between the tires and the ground. However, this may negatively affect grip performance on wet or slippery surfaces. Lastly, and most importantly, within a given contact area, optimizing tire pressure and precise suspension tuning can fully unleash the tire's potential.
9
0
Share

Does disassembling and cleaning the engine affect it?

Disassembling and cleaning the engine generally does not affect it. In automotive maintenance projects, engine cleaning is also a routine maintenance item. If the engine has been experiencing high fuel consumption or running less smoothly recently, cleaning the engine can be considered. However, if the engine has been running smoothly with normal fuel consumption, there is no need to clean it. The reasons why a car's engine needs cleaning are as follows: 1. Sludge formation: When a car is running, engine oil is needed for cooling and lubrication. Over time, the oil undergoes high temperatures, oxidation, and high pressure inside the engine, leading to the formation of impurities and sludge. Poor-quality oil or incomplete combustion can easily result in a large amount of carbon deposits. 2. Sludge and carbon deposit accumulation: The accumulation of these impurities, such as sludge or carbon deposits, can affect the engine's efficiency, leading to a reduction in engine power. The most direct impact is an increase in fuel consumption. 3. Oil pump blockage: If left untreated for a long time, not only will fuel consumption increase, but sludge can even clog the oil pump, causing engine damage. Moreover, when using poor-quality oil, acidic substances containing sulfur and phosphorus may form, which can corrode and damage the engine, affecting its lifespan.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.