How many points are deducted for not holding the handbrake for three seconds in Subject 2?

Where is the Nissan impact sensor located?

The Nissan impact sensor is installed on the inner side of the front fenders on both sides of the vehicle body. Specific locations of Nissan impact sensors: For the collision severity sensors, one impact sensor is installed on the left front and right front parts of the vehicle body respectively, known as the left front impact sensor and the right front impact sensor. The sensor located at the central front part of the vehicle body is called the central impact sensor. As for the protective impact sensors, they are generally installed together with the SRS computer, located under the decorative panel around the central gear shift lever in the cabin. Impact sensors: They are the control signal input devices in the airbag system. Their function is to detect the intensity signal of a vehicle collision when it occurs and input the signal into the airbag computer, which then determines whether to inflate the airbag based on the sensor's signal. Most impact sensors adopt an inertial mechanical switch structure, functioning like a control switch, with their operational state depending on the magnitude of acceleration during a collision. Based on structure, they can be divided into mechanical and electronic types. Mechanical types include ball-type, roller-type, and eccentric ball-type.

4

2

Share

What are the reasons for the Aoling truck being hard to start?

The reason why the Aoling truck is hard to start may be due to fuel quality issues. It is recommended to troubleshoot in the following order: It could be poor fuel quality. New vehicles nowadays generally have few problems, so this possibility is relatively high. It could be an ignition issue—check the spark plugs and ignition coils. If the color and wear are normal, they can be left alone; if not, they should be replaced. At 2,900 kilometers, even if they are wear parts, they should still be under warranty. Additionally, the root cause of insufficient ignition energy should be identified and resolved. It could be poor fuel injector atomization or poor fuel line sealing—check these in order of difficulty. It could also be poor intake or exhaust flow—check for any blockages. There are mainly three reasons why an engine fails to start: Electrical circuit failure; fuel system failure; lubrication system failure. For diesel vehicles, depending on regional temperature conditions, air may be trapped in the low-pressure fuel line. It is recommended to use a hand fuel pump to bleed the air or have it checked at an after-sales service station.

17

0

Share

Why is the air vent hot when driving?

Car heating does not have components like an air conditioning compressor. Instead, the engine's heat is transferred to the coolant, which is the radiator. When the water temperature in the radiator rises, two water pipes connected to the heating radiator of the air conditioning system carry this heat, and the air conditioning fan then blows this heat into the car. Reasons why the air vent is hot when driving: 1. The external circulation mode might still be on, allowing outside air to flow into the car. When the vehicle is stationary, you may not feel any wind, but when driving, the headwind passes through the engine compartment, carrying heat from the engine cooling system and exhaust system, and enters the car through the air conditioning distribution box. Due to air pressure, this air is blown in through the air vents. 2. Due to heat conduction. There is a heating radiator in the middle of the dashboard, separated from the air ducts by just a single panel. This also heats the air inside the air conditioning distribution box. Because of heat conduction, warm air will flow out from the vents, making you feel hot air coming out.

7

4

Share

How to set the time on Mazda Atenza?

To set the time on the Mazda Atenza, first press the SET button once, then press the right arrow key. A horizontal line will appear under the time display. Next, hold down the CLOOK button until the time starts flashing. Use the TRACK/SEEK up arrow to adjust the hours and the down arrow to adjust the minutes. Information about the Mazda Atenza is as follows: 1. The Mazda Atenza was developed with the concept of 'Evolution of ZOOM-ZOOM' (ZOOM-ZOOM Evolution) and aimed to be the 'Best of CD Class (the strongest in its class)'. It utilizes a new high-end product platform independently developed by Mazda, which is one of the most advanced mid-to-high-end car platforms in the world to date. 2. Based on this platform, the Mazda Atenza has undergone comprehensive evolution in terms of premium feel, driving convenience, power, safety, fuel economy, quietness, and many other aspects. It is an outstanding work of the Mazda brand and represents the ultimate pursuit direction of the Mazda brand.

4

5

Share

How much does the BMW M3 weigh?

BMW M3 weighs 2080 kg. M-specific high performance: The 3.0-liter inline 6-cylinder twin-turbocharged engine delivers 510 horsepower, providing powerful performance and excellent smoothness, along with a thrilling engine roar. Technologies such as Valvetronic electronic valve control, high-precision direct injection, and twin exhaust turbochargers support the engine. BMW M3 M-specific suspension: The M-specific suspension structure is lightweight and features optimized suspension geometry, a wide track, and an active M differential. The suspension settings can also be adjusted via M vehicle settings to meet driving needs under different conditions. BMW M3 exterior: The 8-speed M Steptronic automatic transmission supports Drivelogic shift logic, offering multiple shifting options. BMW M3 interior: The newly calibrated M xDrive intelligent all-wheel-drive system with an active M differential allows free switching between three M xDrive dynamic modes: 4WD (all-wheel-drive mode), 4WD Sport (all-wheel-drive sport mode), and 2WD (rear-wheel-drive sport mode, which requires DSC to be turned off).

2

Share

Where is the sunroof drain outlet of the Mercedes-Benz GLK350?

The sunroof drain outlet of the Mercedes-Benz GLK350 is located near the A-pillar at the front of the sunroof. Drain hole location: To locate the drain hole, you need to open the sunroof. There is a tube inside the drain hole, which runs through the A-pillar, allowing water from the sunroof to flow to the bottom of the car. If the sunroof drain hole is clogged, it can cause water leakage from the sunroof. You can find drainage outlets on both sides of the sunroof track. Pour water into these outlets and observe whether the drainage pipes are clear. Check if water flows out from the front fender liner. If it is blocked, inspect the cause and clean any debris from the sunroof track. Use an air hose to blow out dust from the sunroof opening. Maintenance methods for the sunroof include: Avoid opening the sunroof on bumpy roads to prevent excessive vibration that may deform the track. When washing the car, avoid directing high-pressure water jets at the sealing ring, as this can deform it. Regularly clean dust and leaves from the drain holes and grooves to prevent clogging or reduced performance of the sealing ring. Apply lubricant periodically to reduce track wear and extend the sunroof's lifespan.

13

1

Share

How many points are deducted for not holding the handbrake for three seconds in Subject 2?

Where is the Nissan impact sensor located?

What are the reasons for the Aoling truck being hard to start?

Why is the air vent hot when driving?

How to set the time on Mazda Atenza?

How much does the BMW M3 weigh?

Where is the sunroof drain outlet of the Mercedes-Benz GLK350?

Does the A6 belong to the B-segment car?

Where is the Mazda 5 Cabin Air Filter Located?

What Happens When the Clutch Three-Piece Set Has Problems?

How to reset the TPMS light on a JAC vehicle?