How many points are deducted for lane changing over the line on the highway?

2 Answers
Barbara
07/29/25 7:53am
Three points will be deducted, and a fine will be imposed. This behavior is considered a violation of prohibition signs or markings. Below is more information about driving on the highway: 1. Vehicles are not allowed to reverse, drive in the opposite direction, cross the central divider, or stop in the lane on the highway. 2. If driving a medium-sized or larger passenger or cargo vehicle, or a hazardous material transport vehicle on roads other than highways or urban expressways, or if driving any other vehicle exceeding the speed limit by less than 20%, three points will also be deducted. 3. Most sections of the highway have dashed lines, while solid lines are placed at tunnel entrances and exits, tunnel road surfaces, ramps, emergency lanes, and other areas where lane changing is prohibited. These solid lines serve the same purpose as those on urban roads—lane changing or overtaking is not allowed, and drivers must follow the vehicle in front in sequence.
Was this review help?
12
3
Share
JesseLynn
08/13/25 2:51am
Once on the highway, I was in a hurry to change lanes and accidentally crossed the line without checking properly. I got caught by a camera, resulting in a 3-point deduction and a 200-yuan fine. I deeply regretted it. New drivers often get nervous and want to rush, but on the highway, speeds are high, and crossing lines while changing lanes can startle the car behind, potentially causing a rear-end collision. Since then, I've forced myself to always signal, wait 2-3 seconds, check the rearview mirror, and then change lanes. There are rules for solid and dashed lines—solid lines must never be crossed. Now that it's a habit, I feel much safer. Learning more about traffic rules is useful in daily driving. For example, not driving in the correct lane costs 3 points, and accumulating 12 points means retaking the driving test—way too much hassle. So take it slow, don’t rush.
Was this review help?
11
0
Share
Expand All
More Forum Discussions

What is the method for resetting the tire pressure on the 2019 Magotan?

The method for resetting the tire pressure on the 2019 Magotan: In the menu, select settings, enter the iDrive interface, click on vehicle settings, choose tire pressure initialization, and then confirm. Additionally, there is a tire pressure reset switch on the side of the gear lever. With the ignition switch turned on, press and hold this switch button until you hear a beep, indicating the tire pressure reset is complete. The 2019 Magotan has body dimensions of 4865mm in length, 1832mm in width, and 1471mm in height, with a wheelbase of 2871mm. The 2019 Magotan is equipped with a 1.4T turbocharged engine, paired with a 7-speed dual-clutch transmission, delivering a maximum power of 110 kW and a maximum torque of 250 Nm.
18
4
Share

How to Tell if a Tire is a Tubeless Tire?

Methods to identify a tubeless tire: 1. Tubeless tires bear a unique marking, the TUBELESS logo. If present, it's a tubeless tire; otherwise, it's not. 2. If the wheel rim is of the spoke type, it's not a tubeless tire. 3. Tubeless tires have raised sections on their rubber; absence of these indicates it's not tubeless. Precautions for using tubeless tires: 1. Maintain the specified air pressure. Tubeless tires are made of high-quality rubber with good elasticity and flexibility, accommodating a wide range of pressures. Even at high pressure, they don't feel as hard as conventional tires, so always use a pressure gauge for checks. 2. Not suitable for overloading. Tubeless tires are wear-resistant but not pressure-resistant; they're unsuitable for excessive overloading.
2
5
Share

Why does the Focus have power but fail to start?

Reasons why the Focus has power but fails to start: The car's fuel filter is clogged. Here are the solutions: 1. Promptly visit a Ford Focus 4S store or a professional repair shop to clean the car's fuel filter, which can resolve the issue of the engine failing to start. 2. The fuel filter is used to filter impurities and a small amount of moisture in the fuel, so the quality of the fuel greatly affects the lifespan of the fuel filter. However, even if the fuel quality is good, the fuel filter will gradually become clogged over time. The symptoms of clogging are basically typical fuel line blockage issues.
9
4
Share

How to Turn On the Ambient Lighting in a 2020 Audi A4?

The method to turn on the ambient lighting in a 2020 Audi A4 is as follows: The ambient lights will automatically turn on when the headlights (low beams) are activated. Below is some information about ambient lighting: 1. Ambient lighting, also known as LED ambient lighting, is a type of LED light that serves as an ideal choice for theme parks, hotels, homes, exhibitions, commercial spaces, and artistic lighting, creating the desired atmosphere for daily life. 2. Ambient lighting acts as a light source inside the vehicle to enhance the mood, making the interior more visually appealing and elevating the overall premium feel. These lights come in various colors, and some models offer multiple color options that can be switched between. 3. Ambient lighting can help drivers feel more relaxed during nighttime driving, reducing drowsiness. However, it's important to use ambient lighting appropriately.
7
5
Share

What to Do When the Tiida's Air Conditioning Is Not Cooling?

Solutions for the Tiida's air conditioning not cooling: 1. Add refrigerant; 2. Replace the air conditioning flap; 3. Clean the air filter and screen. Functions of the air conditioning: 1. Filter the air entering the cabin; 2. Absorb moisture from the air; 3. Maintain air cleanliness and prevent bacterial growth; 4. Prevent window fogging; 5. Adjust cabin temperature. The Tiida is a compact car under Dongfeng Nissan, with body dimensions of 4393mm in length, 1766mm in width, and 1539mm in height, and a wheelbase of 2700mm. The Tiida is equipped with a 1.6L naturally aspirated engine, delivering a maximum power of 90 kW and a maximum torque of 155 Nm, paired with a 5-speed manual transmission. It features a front suspension type of MacPherson independent suspension and a rear suspension type of torsion beam non-independent suspension.
15
2
Share

How to Avoid Crossing the Line in Right-Angle Turns?

Maintain a moderate speed as excessive speed makes it difficult to control the vehicle, increasing the likelihood of cutting corners or crossing lines. Here are the steps to successfully navigate a right-angle turn: 1. Before entering the turn, position the car closer to the opposite side of the turn direction. For instance, when making a right turn during a test, keep the car near the left side of the lane without crossing the left boundary line. 2. As you slowly enter the turning zone, focus your gaze on the right-side mirror. Once the mirror passes the corner line by approximately 2-3cm, swiftly turn the steering wheel all the way to the right. Speed is crucial in this maneuver. 3. After the right wheels have cleared the corner, begin straightening the steering wheel while shifting your focus to the road ahead.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.