How many points are deducted for driving straight in a bus lane?

1 Answers
OEvan
07/29/25 11:48pm
Illegally occupying a bus lane violates the provisions of the "Road Traffic Safety Law": If a motor vehicle does not drive in the designated lane, the driver's license will be deducted 2 points, and a fine of 200 yuan will be imposed. The fine must be paid within 15 days. Notes: 1. Be aware of the permitted hours: Clearly understand the permitted hours for bus lanes. Many bus lanes are dedicated to buses during peak hours, and other vehicles can enter during non-peak hours. Be sure to know the dedicated time slots to avoid entering. 2. Familiarize yourself with the road: Familiarize yourself with the road in advance. If you are not familiar with the local roads, carefully identify road signs or follow taxis, which usually won’t lead you wrong. 3. Avoid being forced to yield the lane: Inexperienced drivers may be forced into the bus lane by other vehicles. Therefore, novice drivers should be cautious. When being squeezed, you can slow down and yield, but never give up the lane.
Was this review help?
8
1
Share
More Forum Discussions

What is the fuel consumption of the Terra?

Terra has a total of 6 models on sale, namely the Terra 2020 2.5L XV automatic two-wheel drive Zhixiang version, automatic two-wheel drive luxury version, with an NEDC fuel consumption of 9.2L per 100km. The automatic four-wheel drive luxury version and automatic four-wheel drive flagship version have an NEDC fuel consumption of 9.6L per 100km. The manual two-wheel drive elite version and manual two-wheel drive leading version have an NEDC fuel consumption of 8.9L per 100km, all equipped with a 193 horsepower engine. The level of a car's fuel consumption is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. The specific factors that can increase a car's fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light, can increase fuel consumption. The car itself: Cars with larger displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean greater power, requiring more gasoline for combustion. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not atomize easily during cold starts, requiring more gasoline to combust, thus increasing fuel consumption. Additionally, at low temperatures, the engine's computer will control the engine to run at higher RPMs to warm up, which also increases fuel consumption.
10
2
Share

What car has the character 'Tang' on it?

Different car brands have different logos. The car with the character 'Tang' in its emblem is BYD. Here is more information about it: 1. The 'Tang' character represents the BYD Tang, a new dual-mode hybrid SUV. The BYD Tang is positioned as a B-segment SUV. The main implication of 'Tang' is to reflect Chinese elements, and there are also BYD Song and BYD Qin. 2. The first-generation 'Tang' was launched on January 20, 2015, as a dual-mode hybrid SUV with a gasoline engine and two electric motors. The Tang can achieve various power mode conversions, and through the vehicle optimization by the electronic control system, the Tang can not only run fast but also maintain very low fuel consumption. 3. The Tang is BYD's proud work. It has very high safety standards. In the C-IASI crash tests, the Tang received a G (Good) score in all tests, including roof strength, 25% offset collision, and occupant protection outside the vehicle, earning it the nickname 'Road Tank'.
19
3
Share

What car brand does the MG logo represent?

MG, also known as Morris Garages, is an automobile brand under SAIC Motor Corporation Limited, with its origins in the UK. MG stands for Morris Garages, which translates to Morris Garage. The MG brand includes models such as the MG6, MG HS, MG ZS, MG3, MG GS, MG GT, MG EZS, and the MG6 Plug-in Hybrid. Below is additional information about MG: 1. It features the strongest 'Golden Power Combination' in its class, with a new-generation 1.5T PRO engine paired with a new DCT280 wet dual-clutch transmission, delivering a maximum power of 181 horsepower and a maximum torque of 285 N·m. 2. The MG HS is equipped with a 1.5T turbocharged engine, producing a maximum power of 169 horsepower and a maximum torque of 275 N·m, matched with either a 6-speed manual or a 7-speed dual-clutch transmission.
20
3
Share

How to Replace the Brake Light on a Malibu XL?

To replace the brake light on a Malibu XL, use specialized tools to remove the screws on the old bulb, take out the old bulb, and install the new one. Below is relevant information: 1. Brake lights are typically installed at the rear of the vehicle, featuring a red main body color to enhance light penetration. This ensures that following vehicles can easily detect when the vehicle ahead is braking, even in low visibility conditions, helping to prevent rear-end collisions. 2. Below is a classification of automotive lights: (1) Headlights: Combined headlights are located at the front of the vehicle, primarily serving illumination and signaling purposes. The light emitted by headlights illuminates the road ahead, enabling safe driving at night. (2) Taillights: Combined taillights are positioned at the rear of the vehicle, mainly providing illumination and signaling functions. (3) Turn signals: These lights indicate to other road users the intention to turn left or right. Regulations require them to be amber in color.
4
5
Share

How to Fold the Rearview Mirror on a Santana?

Santana's rearview mirrors cannot be folded electrically; they require manual folding. Simply apply force to fold them. Below is related content: 1. The rearview mirror folding function refers to the ability of the car's side mirrors to fold and retract when necessary. During driving, minor collisions are inevitable, and as the widest components installed on the vehicle, rearview mirrors are most susceptible to impact in case of side scrapes. To minimize damage, rearview mirrors need a folding function. Mirrors with this feature can retract when passing through narrow sections, improving the vehicle's passability. When the driver leaves the car, the mirrors can also be folded to protect the mirror surfaces. 2. The adjustment styles for electric rearview mirrors vary among different car models. Pressing the automatic folding button or rotating the knob to the automatic folding position will simultaneously fold both side mirrors.
11
4
Share

Is the Elantra's body size small?

The length, width, and height dimensions of the Elantra are 4610mm/1800mm/1450mm, which are official data. The length of the Elantra refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the car; the width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle; the height refers to the distance between the highest point of the vehicle and the supporting plane of the vehicle. The naturally aspirated engine of the Elantra has a maximum power of 84.5kw and a maximum torque of 143.9 Nm. This engine reaches its maximum power at 6300 rpm and its maximum torque at 4500 rpm. It is equipped with multi-point electronic fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with a manual transmission (MT). The state has relevant regulations regarding vehicle dimensions. According to the national standard 'GB1589-89,' the total width of a vehicle does not include side mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. In other words, the significance of vehicle width data in the national standard is to ensure enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, the national standard stipulates that the total width of a vehicle must not exceed 2.5m to meet the usage requirements of public roads.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.