How many points are deducted for driving on the emergency lane on the highway?

1 Answers
LaBradley
07/24/25 9:56pm
Driving on the emergency lane on the highway results in a deduction of 6 points. Circumstances where a motor vehicle driver committing illegal acts will be penalized with 6 points at a time: Driving a motor vehicle during the period when the motor vehicle driving license is temporarily confiscated; Driving a motor vehicle in violation of traffic signal lights; Driving a motor vehicle on the highway in low visibility weather conditions without following regulations; Obtaining a replacement motor vehicle driving license by concealment or deception; Parking a motor vehicle (excluding passenger transport vehicles) on the highway lane. Emergency situations: When a motor vehicle is involved in a traffic accident or breakdown and needs to stop for rescue, it can be temporarily parked in the emergency lane; It is also for the use of police cars, fire engines, ambulances, and engineering rescue vehicles when performing urgent tasks.
Was this review help?
4
3
Share
More Forum Discussions

What is the battery model of the JAC Refine S3?

The original battery model of the JAC Refine S3 is the 55D23L 12V battery. The following are the details about the JAC Refine S3: Appearance: The front face of the Refine S3 continues JAC's "Bottle Mouth" design, incorporating urban crossover SUV design elements, presenting an overall stylish and dynamic appearance. The exterior details complement the overall design, with the air intake grille featuring three prominent chrome strips, which have become a signature of the Refine S3. The front and rear light designs, along with the window lines, and the use of chrome decorations on the windows and lower door sills enhance the vehicle's appeal. Performance: The mass-produced Refine S3 is equipped with a 4GB1.5L engine, delivering a rated power of 83kW/6000rpm and a maximum torque of 146Nm, with low-end torque reaching 100Nm. The engine is paired with either a 6MT or CVT transmission, reducing the fuel consumption to 6.5L per 100 kilometers, thereby lowering the cost of ownership.
20
3
Share

What is the maximum number of traffic violations a car can be recorded for in one day?

If a vehicle is parked illegally in the same location (without changing its position) throughout the day, it will receive a maximum of two violation penalties. Below are specific details about traffic violations: 1. Definition: Traffic violations (formerly known as traffic offenses, now referred to as traffic infractions) generally refer to actions by motor vehicle drivers, non-motor vehicle drivers, or pedestrians that violate road traffic safety laws, traffic management regulations, or affect traffic conditions. 2. Traffic Violations: Typically, there are two main types of traffic violation fines. The first is an on-the-spot violation ticket. The second is an electronic violation record. On-the-spot violation tickets are usually issued by traffic law enforcement officers who gather evidence at the scene and issue a penalty decision. Fines may also be issued by urban management officers if the vehicle is parked on sidewalks or public areas not designated for traffic, as this violates urban management regulations and falls under their jurisdiction.
1
3
Share

Why is the car battery light flashing?

Generally, when the car battery light is on, it indicates a fault in the vehicle's charging system, possibly due to internal damage to the alternator, resulting in insufficient power generation. Here are the relevant details: 1. Battery: A car battery, also known as a storage battery, is a type of battery that converts chemical energy into electrical energy. Typically, the term 'car battery' refers to a lead-acid battery, which mainly uses lead and its oxides as electrodes and sulfuric acid solution as the electrolyte. 2. Precautions: Like all batteries, if not charged, the car's 12-volt battery will eventually run out of power. Therefore, cars are equipped with a built-in charging system. Most vehicles have an alternator and voltage regulator to charge the battery and power the car while the engine is running.
19
4
Share

What are the reasons for the engine warning light in older BYD F3 models?

The engine warning light may illuminate due to the following 7 main reasons: Sensor malfunction: This includes sensors such as coolant temperature, crankshaft position, air flow, intake temperature, and oxygen sensors. When these sensors are damaged, have poor contact, or experience signal interruption, the vehicle's ECU cannot accurately obtain engine data, triggering the warning light. Fuel quality issues: Failure to use the manufacturer-recommended fuel and engine oil may cause engine wear, leading to the warning light activation. Poor fuel mixture combustion: Incomplete combustion can cause engine carbon buildup or knocking. When detected by oxygen sensors and reported to the ECU, the warning light will illuminate. Potential causes include spark plug failure, ignition coil issues, fuel pump malfunction, or clogged fuel lines. Turbocharging problems: Issues with intake boost pipes or turbochargers (most commonly turbocharger damage) can trigger the light. Symptoms may include oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black exhaust smoke. Intake system problems: Clogged engine pipes due to dirty air filters (not cleaned regularly) may eventually cause the warning light to activate. Exhaust system faults: Problems like rear oxygen sensor failure, catalytic converter issues (most common), or exhaust camshaft/bearing failures can illuminate the light. Causes include using leaded gasoline, improper lubricant additives, physical damage to the catalytic converter, or fuel system malfunctions. Anti-theft system failure: Malfunctions in the electronic anti-theft system or mismatches between the anti-theft controller and engine ECU may prevent normal engine operation while activating the warning light. When the engine warning light appears, follow these steps: 1. First check if the engine operates normally. If there's shaking, black smoke, etc. (especially with a red light), do NOT restart the engine. 2. If the engine can start, turn it off for 5-10 minutes. Without pressing brakes, push the start button once or turn the key halfway to ON position (without clutch). After 5-10 seconds of self-check, observe if the warning light turns off. 3. If the light persists, visit a service center promptly. Technicians can use diagnostic tools to read trouble codes and perform targeted repairs.
19
2
Share

What Causes Steering Wheel Vibration While Driving?

There are several reasons for steering wheel vibration during driving: poor tire dynamic balance; wheel hub issues; and vibration caused by resonance. Below are detailed explanations about steering wheel vibration: 1. Poor tire dynamic balance: During driving, if a tire experiences a strong impact in a localized area, it may cause the balance weights to fall off or become damaged, thus affecting the tire's dynamic balance. At high speeds, the driver will feel noticeable vibration in the body and steering wheel, with the vibration becoming more pronounced as speed increases. 2. Wheel hub issues: If the wheel hub has previously suffered an impact, it may become deformed. During subsequent driving, the deformed wheel hub can cause the wheel to vibrate, leading to steering wheel vibration. 3. Vibration caused by resonance: If parts in the engine compartment are not properly installed, are loose, or cause resonance—such as the intake pipe, air filter housing, radiator, headlights, gearshift cables, wiring harnesses, etc.—or if there are loose components or excessive gaps inside the dashboard, normal vehicle vibration can be amplified by resonance. This issue can be resolved by carefully inspecting and resetting the components or by slightly increasing the idle speed to avoid the resonance point.
18
1
Share

How Long Does Auto Body Repair Generally Take?

Auto body repair time varies depending on the technique used. Minor deformities can typically be fixed within half an hour, but after the bodywork, processes like painting and baking the paint are required, which take at least two to three days. Below is relevant information: 1. Auto Body Repair: Auto body repair is a processing method in vehicle maintenance. If the exterior of the car body is damaged or deformed, bodywork is necessary. 2. Process Characteristics: Bodywork features include light weight, high strength, conductivity (can be used for electromagnetic shielding), low cost, and good performance for mass production. It is widely used in fields such as electronics, communications, automotive industry, and medical equipment.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.