How many points are deducted for driving in the wrong direction on an elevated road?

1 Answers
StLila
07/29/25 12:22pm
Driving in the wrong direction on an elevated road results in a deduction of three points, with penalties including a warning or a fine. For fines imposed on pedestrians, passengers, and non-motor vehicle drivers, if the party involved has no objections, the fine can be collected on the spot. Fines must be issued with a unified receipt from the finance department of the province, autonomous region, or municipality directly under the central government. If the unified receipt from the finance department is not provided, the party involved has the right to refuse to pay the fine. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses": 1. If a motor vehicle driver commits any of the following violations, 3 points will be deducted at one time: driving a motor vehicle without overtaking or yielding as required, or driving in the wrong direction. 2. If a motor vehicle driver commits any of the following violations, 12 points will be deducted at one time: driving a motor vehicle in reverse, driving in the wrong direction, or crossing the central divider on a highway. Motor Vehicle Traffic Regulations: Article 42: When driving on the road, motor vehicles shall not exceed the maximum speed indicated by speed limit signs. On road sections without speed limit signs, a safe speed shall be maintained. When driving at night or on sections prone to danger, or under weather conditions such as sandstorms, hail, rain, snow, fog, or ice, the driving speed shall be reduced. Article 43: When motor vehicles are driving in the same lane, the following vehicle shall maintain a safe distance from the vehicle in front to allow for emergency braking measures. In any of the following circumstances, overtaking is not allowed: the vehicle in front is making a left turn, turning around, or overtaking; there is a possibility of meeting an oncoming vehicle; the vehicle in front is a police car, fire truck, ambulance, or engineering rescue vehicle performing emergency tasks; or passing through sections such as railway crossings, intersections, narrow bridges, curves, steep slopes, tunnels, pedestrian crossings, or urban areas with heavy traffic where overtaking is not possible.
Was this review help?
3
1
Share
More Forum Discussions

What are the functions of the various control buttons inside a Toyota car?

Toyota car interior control button functions are as follows: I. Center Console Buttons 1. Vehicle Stability Control (VSC): Effectively prevents body skidding, tailspin and other loss-of-control situations. Generally not recommended for manual deactivation by drivers. 2. Parking Radar/Image: Activates panoramic imaging and radar functions, providing audible alerts and visual feedback to help drivers detect surrounding obstacles. 3. Recirculation/Fresh Air: Recirculation mode keeps cabin air enclosed, while fresh air mode exchanges air between interior and exterior. Use recirculation mode in traffic jams, tunnels or when external air quality is substandard. Switch to fresh air periodically during highway driving to maintain air freshness and prevent health issues. 4. Auto Hold: Eliminates need for continuous brake pedal pressure by automatically locking wheels. Pressing accelerator pedal releases wheel lock for continued driving. 5. Auto Start-Stop: Temporarily shuts off engine at traffic lights. Engine restarts when brake pedal is released to resume driving. II. Door Buttons: 1. Toyota Yaris driver's door controls: (1) Rear window lock button; (2) One-touch window control switches; (3) Central locking button. III. Overhead Buttons: 1. Sunroof tilt open; 2. Sunroof slide open; 3. Driver reading light; 4. Front passenger reading light; 6. Interior light switch; 6. Welcome light.
19
0
Share

Where is the trunk button inside the BMW 1 Series?

The trunk switch of the BMW 1 Series is located on the left side of the steering wheel, on the center console, or on the remote key. Precautions for using the car trunk are as follows: 1. It is best not to place valuables or luggage in the car: In daily car use, there are specific considerations for what can and cannot be placed in the trunk. First, valuables should not be placed in the trunk, including luggage. Because 'thieves never leave empty-handed,' even the most useless items may be taken by thieves. 2. Avoid placing flammable and explosive items in the car: Flammable and explosive items should not be placed in the trunk. Due to high summer temperatures and road bumps, these items can easily explode, posing a danger. 3. Food should not be stored in the car for long periods: Items such as bottled water, snacks, and fruits should not be stored in the trunk for extended periods. Harmful gases may exist in the car, and combined with high summer temperatures or winter freezing, these foods can spoil or develop harmful substances. Consuming them can harm health, while not consuming them leads to waste, so try to avoid storing these items in the car.
16
2
Share

Should Ford Edge use 5W-30 or 40 engine oil?

Ford Edge is better suited with 5W-30 engine oil. The reasons are as follows: 1. Semi-synthetic oil: The original factory oil used for Ford Edge is Changan Ford's specialized engine oil with a viscosity grade of 5W-30, which is a semi-synthetic oil. 2. Better protection performance: The difference between 5W-30 and 0W-40 is that 0W-40 oil has better fluidity in low-temperature environments and higher viscosity in high-temperature environments, providing better protection performance, but it also relatively increases the vehicle's fuel consumption. Additional information: The main functions of engine oil are as follows: 1. Lubrication and friction reduction: It forms an oil film on the surfaces of two sliding components, preventing friction during operation and ensuring smooth operation. 2. Auxiliary cooling: The engine generates high temperatures during operation. When the oil reaches the operating parts, it absorbs heat and then carries the heat away, assisting in cooling the components. 3. Cleaning: It can carry carbon deposits, sludge, and worn metal particles from engine parts back to the oil tank through circulation, and flush away dirt generated on the working surfaces of the parts through the flow of the lubricating oil. 4. Sealing and leak prevention: The oil can form a seal between the piston rings and the piston, reducing gas leakage and preventing external pollutants from entering. 5. Rust and corrosion prevention: The lubricating oil can prevent water, air, acidic substances, and harmful gases from coming into contact with the parts. 6. Shock absorption: When the pressure at the engine cylinder port rises sharply, suddenly increasing the load on the piston, piston pin, connecting rod, and crankshaft bearings, this load is transmitted through the bearing lubrication, cushioning the impact load.
20
0
Share

Will the Honda Fit feel unstable at high speeds?

Honda Fit is relatively lightweight, so it may feel a bit unstable when driving at high speeds. Additional information about the Honda Fit's performance: 1. Interior: As a mid-cycle refresh, the 2020 Fit retains the overall design layout of the current model. The SPORT version comes with a steering wheel adorned with red stitching, which, although the steering wheel design remains unchanged, significantly enhances the sporty ambiance inside the car. 2. Powertrain: The domestic version of the new Fit continues to use the existing L15B3 1.5L naturally aspirated engine, delivering a maximum output power of 96kW (131PS) and a peak torque of 155N·m. The transmission system is paired with a 5-speed manual or CVT continuously variable transmission.
12
1
Share

What are the reasons for the failure of the Focus wiper not working?

Possible reasons for the wiper not working: 1. Wiper motor damage; 2. Wiper fuse damage; 3. Wiper motor circuit open; 4. Wiper relay damage. Additional information: The power source of the wiper comes from the motor, which is the core of the entire wiper system. The quality requirements for the wiper are quite high. A DC permanent magnet motor is used, and the wiper motor installed on the front windshield is generally integrated with the worm gear mechanical part. The function of the worm gear mechanism is to reduce speed and increase torque, and its output shaft drives the four-bar linkage mechanism, which converts continuous rotational motion into left-right swinging motion.
18
4
Share

What Causes the Power Steering Failure in Focus?

Directional machine failure light is on due to the lack of medium in the vehicle's power system, leading to mechanical power failure. Replacing the internal power steering fluid can solve the problem. The reasons for Focus steering failure are as follows: 1. There is a large amount of air in the power steering system, causing abnormal car steering; 2. Foreign objects in the steering hydraulic pipeline cause the steering pump flow control valve to stick; 3. Loose connections in the power steering system lead to steering fluid leakage; 4. Excessive wear of the steering gear piston cylinder, poor sealing of the oil seal, or adhesion or damage of the control valve. Extended information: The role of the car power steering pump: 1. Reduce the driver's operating intensity; 2. Improve maneuverability; 3. Ensure the safety of the steering system and the driver's steering feel when the vehicle is driving at high speed.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.