How many points are deducted for driving in the wrong direction and crossing the line?

2 Answers
King
07/28/25 9:58pm
The penalty for driving in the wrong direction and then crossing the line is a deduction of 6 or 15 points along with a substantial fine. Below are the relevant details: 1. Penalty for wrong-way driving: If a motor vehicle driver commits any of the following violations, they will be penalized with a deduction of 3 points and a small fine: driving a motor vehicle on a regular road without following overtaking rules, yielding, or driving in the wrong direction. If a motor vehicle driver commits any of the following violations, they will be penalized with a deduction of 12 points and a fine: driving a motor vehicle in reverse, driving in the wrong direction, or crossing the central divider on a highway. 2. Penalty for crossing the line: Driving a motor vehicle over a solid line: a deduction of 3 points and a small fine.
Was this review help?
3
2
Share
VanGarrett
08/12/25 2:31am
After driving for over a decade, this kind of traffic violation annoys me the most. Driving the wrong way on regular roads directly deducts 3 points, and crossing the line adds another 1 point, totaling 4 points gone. If it happens on a highway, it's even harsher—driving the wrong way costs you all 12 points immediately, with an additional 1 point for crossing the line. If the police catch you committing both violations at once, they won't hesitate to issue two tickets on the spot. I once saw a novice driver both going the wrong way and crossing the line at an intersection, and their license was suspended that very day. The key issue is how dangerous this behavior is—driving the wrong way risks a head-on collision, while crossing the line can scrape cars in adjacent lanes, endangering everyone. My advice: install a dash cam, pay close attention to road markings, and use navigation in unfamiliar areas.
Was this review help?
17
5
Share
Expand All
More Forum Discussions

What is the fuel consumption per 100 kilometers for the CFMOTO 800MT?

CFMOTO 800MT fuel consumption is approximately 5 liters per 100 kilometers. CFMOTO 800MT exterior configuration: The CFMOTO 800MT will be divided into two versions, the S Sport version and the T Touring version. There are many differences in configuration between the two versions, including differences in appearance such as wheels, engine guards, handguards, etc. Both versions offer the option of with or without side cases. Other highlights of the CFMOTO 800MT: The CFMOTO 800MT has many highlights and selling points, such as the LC8C power platform provided by KTM, electronic throttle, IMU, cornering ABS, cruise control, quick shifter, integrated heated handlebars and seat, etc. Especially, the 95 horsepower gives it an advantage among products in the same class.
8
5
Share

Does Installing ETC in the Black Dot Area Affect Its Usage?

The ETC device can be installed on the black dot area of the windshield without affecting its functionality. As long as it does not obstruct the driver's view and can detect the toll station's equipment, it will work fine. However, installing it on the black dot area has a drawback: the solar charging capability of the ETC device may weaken, potentially leading to power loss over time. For small cars, the recommended ETC installation position is generally in the upper middle part of the front windshield, while for large vehicles like trucks and buses, it should be installed in the lower middle section. The ideal installation height is between 1.2 meters and 2.5 meters, with an angle ranging from 30 to 90 degrees. If the vehicle has or will have anti-explosion film, which can interfere with microwave signal transmission, the ETC should be installed in the microwave window strip. Here are some key considerations for ETC installation: 1. Avoid obstructing the driver's view: The best position is behind the rearview mirror. Many car models have windshields with a steep incline, which can reduce the driver's field of vision. Installing the ETC behind the rearview mirror on the right side helps minimize blind spots. 2. Ensure proper charging: The ETC tag consumes power but typically doesn't require manual charging or battery replacement, as it has a built-in solar panel. Therefore, avoid installing it on the black dot area or any location that might block the solar panel. 3. Do not remove the device once installed: The adhesive includes an anti-tamper switch. If the device is removed, the switch will trigger, locking the ETC tag and requiring an unlock at an ETC service point. This feature prevents multiple vehicles from sharing one device. ETC usage tips: - The ETC transaction sensing range is 8 meters. To avoid paying for the vehicle ahead due to its faulty ETC device, maintain a distance of at least 10 meters from the car in front. - The ETC lane recognizes vehicles at speeds up to 20 km/h. Driving faster may result in failed transactions. - If using a debit card linked to ETC, insufficient balance can also cause transaction failures.
18
0
Share

The Function of Car Floor Mats?

Car floor mats have effects such as dustproof and water absorption. Dustproof function: Car floor mats are also a type of interior decoration that not only protects the cleanliness inside the car but also adds an aesthetic effect. Therefore, when choosing car floor mats, the pattern, comfort, and visual appeal are all very important. Water absorption function: Car floor mats can absorb water and dust, effectively absorbing residual moisture from underfoot. They also provide an anti-slip effect between the brake and accelerator, helping to prevent many accidents. Additionally, they are very convenient to clean. Choosing thick floor mat materials can also effectively block some noise from the chassis and tires, thereby improving comfort to a certain extent. Floor mat materials: When selecting floor mats, the biggest advantage of linen mats is their very affordable price, but the biggest drawback is their lack of durability and softness, which can lead to deformation after a few washes. PVC mats are easy to clean and have a decent appearance, but their biggest disadvantage is that they become very hard in winter, and the materials used in some products cannot be controlled, resulting in a stronger odor. Leather mats are very easy to clean, but their biggest drawbacks are their inability to absorb water or dust and their poor sound insulation effect.
20
5
Share

Where is the rearview mirror heating button located on the Lynk & Co 03?

The rearview mirror heating button on the Lynk & Co 03 is located below the vehicle's central control screen, within the air conditioning control area. It is the last button among the four buttons in the air conditioning control panel, featuring a rectangle icon with three curved lines and arrows extending from the bottom to the top. The function can be used when the vehicle is powered on, and activating it simultaneously turns on the rear windshield heating. Rearview mirror heating is particularly useful during rainy or snowy weather. When activated, the heater behind the mirror quickly warms the mirror surface, gradually removing rainwater or fog, eliminating the need for frequent manual wiping by the driver and thereby reducing driving hazards. How to use the rearview mirror heating function: There are generally two ways to activate the rearview mirror heating function. One is combined with the electric rearview mirror adjustment button, where rotating the knob activates the heating. The other is located on the air conditioning control panel, where pressing the heating button turns it on. No manual angle adjustment is needed, as the driver's side has adjustment buttons. Principle of the rearview mirror heating function: After rotating the knob, the electric heater behind the rearview mirror glass rapidly heats up to a fixed temperature within a few minutes, typically between 35-60 degrees Celsius. The heat is then distributed across the left and right rearview mirrors. Simultaneously, due to the rising temperature and evaporation, water droplets on the mirror surface gradually shrink, and fog slowly dissipates, effectively heating the mirror and removing frost. However, in heavy rain, its effectiveness may diminish and become less noticeable. Precautions for using the rearview mirror heating function: The principle of rearview mirror heating involves electric heating wires embedded in the mirror, which consume a significant amount of power. When using this function, ensure the vehicle is running. Avoid activating rearview mirror heating while the car is stationary to prevent draining the battery, which could lead to insufficient power for starting the vehicle. Other methods for defogging rearview mirrors include: Opening windows for air circulation: Slightly opening both side windows creates airflow between the interior and exterior, reducing the temperature difference and gradually eliminating fog. Adjusting the car's air conditioning to the appropriate setting can also help, as blowing warm air from the AC aids in defogging.
10
4
Share

Can I Get Free Repair at the 4S Shop for Faulty Power Windows in a New Car?

If the issue stems from the vehicle itself and not due to human damage, it can indeed be repaired for free at the 4S shop. Labor cost calculation standards at 4S shops: The labor hours (duration) are typically predetermined by the manufacturer. For instance, a routine maintenance service might be allocated 2 labor hours, etc. The labor hour rate is generally set by the 4S shop based on local conditions, taking into account two main factors: the local wage level and the labor hour rates of other brand 4S shops in the same city. Power window system: An electric window system consists of the window glass, window regulator, motor, relay, switches, and other components. Typically, electric window systems are equipped with two sets of control switches. One set is installed on the dashboard or the driver's side door armrest, serving as the master switch, which allows the driver to control the movement of each window. The other set is installed on each passenger door, functioning as individual switches that can be operated by passengers. Usually, the master switch also includes a circuit breaker switch; if this is turned off, the individual switches will not function.
7
4
Share

What Items Are Checked During a Vehicle Inspection?

The following items are checked during a vehicle inspection: 1. Inspect the body paint: Check for scratches, spots, dents, and wear on the paint. Observe under sufficient sunlight to see if there is any color difference in the paint. Open the doors and push/pull them from various angles to let light shine from different directions, checking if the sheet metal is smooth and whether there are any signs of repair. 2. Check the vehicle identification plate: The vehicle identification plate is located on the side of the driver's door or inside the engine compartment. Check if the manufacturing date is too far in the past. If it's more than six months old, the vehicle might be a stock car or a test drive car. Also, ensure the information on the vehicle identification plate matches that on the vehicle certification. 3. Check the windshield: The numbers represent the most recent production year, and the dots represent the production month. If the dots are on the left side of the number, it indicates production in the first half of the year—subtract the number of black dots from 7 to get the specific month. If the dots are on the right side of the number, it indicates production in the second half of the year—subtract the number of black dots from 13 to get the specific month. If the windshield production date is too far from the vehicle's manufacturing date (a year or more), the windshield has likely been replaced. 4. Check if the engine compartment is clean: If the vehicle has been stored for a long time or used, some areas may have obvious dust or stains. Also, check if the engine oil is sufficient and whether the levels of other fluids are within the acceptable range. 5. Check if the doors open and close smoothly: The door hinges should rotate without noise, the gaps between the doors and the front/rear bumpers should be consistent, and the doors should close properly in one motion. 6. Check the tire production date: If the tire production date is significantly older than the vehicle pickup date, consider replacement. 7. Check basic vehicle functions: Ensure the windows roll up and down properly, the air conditioning cools, the air vents have no strange odors, the dashboard functions operate correctly, the wipers work, the lights turn on properly, and the sunroof opens and closes smoothly, among other things.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.