How Many Points Are Deducted for Crossing the Line in Curve Driving?

1 Answers
VonMadeline
07/29/25 6:32pm
In Subject 2 of the driving test, crossing the line in curve driving results in a deduction of 100 points. Below is a detailed analysis of the reasons for crossing the line in curve driving: Entrance Direction: There are two types of entrance directions: left entrance and right entrance. For a left entrance, the vehicle must stay as close as possible to the right-side line before turning the steering wheel to the left. Conversely, for a right entrance, the vehicle must stay as close as possible to the left-side line before turning the steering wheel to the right. Due to the existence of the inner wheel difference, this consideration is crucial to avoid crossing the line. Driving Process: During the driving process, the front of the vehicle must follow the edge line. When turning left, the front of the vehicle should follow the right-side line, and when turning right, it should follow the left-side line. Exit Direction: The exit direction of the S-curve also has two types: left exit and right exit. When the front wheels are just leaving, remember to turn the steering wheel half a turn to the right to prevent the rear wheels from crossing the line. For a right exit, when the front wheels are just leaving, remember to turn the steering wheel half a turn to the left to avoid the rear wheels crossing the line.
Was this review help?
11
1
Share
More Forum Discussions

How to Connect Bluetooth in Toyota Alphard?

Toyota Alphard Bluetooth connection method: First, establish a pairing relationship between the mobile phone and the car's Bluetooth device, and set the mobile phone's Bluetooth to be visible to everyone in the Bluetooth settings. Then, search for Bluetooth devices on the mobile phone. Once found, select and pair with it. The pairing password is 0000. After completing the pairing, the connection will be successful. The Toyota Alphard is a high-end luxury MPV model. The dimensions of the Toyota Alphard are 4975mm in length, 1850mm in width, and 1950mm in height, with a wheelbase of 3000mm. The Toyota Alphard is equipped with a 3.5L naturally aspirated engine, model 2GR-FE, with a maximum power of 274 horsepower and a maximum torque of 340 Nm.
9
2
Share

Why Does Car Air Conditioning Consume More Fuel?

Here are the reasons why using car air conditioning increases fuel consumption: 1. Compressor operation increases fuel consumption: The main reason for higher fuel consumption when using air conditioning is that the air conditioning compressor requires significant power to operate. The variation in fan speed does not greatly affect power demand. Therefore, within a certain speed range or wind resistance, using air conditioning consumes more fuel, while not using it saves fuel. 2. Related to car displacement and speed: For a car that normally consumes 10 liters of fuel per 100 kilometers, using air conditioning can increase fuel consumption by about 2 liters. Tests show that higher temperatures and humidity levels lead to greater fuel consumption due to air conditioning. When the temperature exceeds 20 degrees Celsius, fuel consumption can increase by approximately 10% to 20%, depending on temperature and humidity differences. In extreme conditions with temperatures around 40 degrees Celsius and high humidity, fuel consumption can increase by up to about 30%.
6
3
Share

What is the method to reset the tire pressure light on a Toyota RAV4?

Toyota RAV4 tire pressure light reset method: Adjust the tire pressure to the standard level, start the engine, on the dashboard display showing the mileage interface, select the up arrow from the left side of the steering wheel, a string of English letters will appear, then press the R button on the dashboard or the small black button on the dashboard, "YES +" and "NO -" will appear, then select the plus sign on the right side of the dashboard, wait a few seconds to return, turn off the engine and restart, and the warning will no longer appear. The Toyota RAV4 is a compact SUV from FAW Toyota, equipped with a 2.0L 171 horsepower L4 engine and a CVT continuously variable transmission (simulating ten gears), with a maximum engine power of 126kW and a maximum torque of 209Nm.
9
3
Share

What to Do If You're Afraid to Drive for the First Time?

There are several methods to address the fear of driving for the first time: 1. Familiarize yourself with the vehicle: Since you're going on the road, it's essential to be familiar with the car you'll be driving. Get to know all the buttons and controls thoroughly, as unfamiliarity can lead to panic during driving, potentially causing incorrect operations for beginners. 2. Choose familiar routes: Beginners should always select routes they are familiar with for their first drive. This not only helps reduce nervousness but also allows them to get accustomed to the road conditions, avoiding many unnecessary troubles. 3. Adjust mirrors and seat: Due to differences in height and weight, everyone's position in the car varies. It's crucial to adjust your seat properly to ensure comfort and the ability to fully depress the brake pedal. Additionally, adjust the rearview mirrors to guarantee clear visibility behind you.
9
5
Share

What does 400cc mean?

400cc means the engine displacement of the car is 400cc. Here are the specific details: 1. Introduction: Displacement, a specialized term in hydraulic transmission, refers to the volume of fluid inhaled or discharged per stroke or cycle. 2. Generally, a larger displacement: The engine releases more energy per unit time, which means better "power performance". 3. Other details: The working volume through which the piston moves from the top dead center to the bottom dead center is called the cylinder displacement; if the engine has several cylinders, the sum of the working volumes of all cylinders is called the engine displacement. It is usually expressed in liters. Engine displacement is one of the most important structural parameters, and it represents the size of the engine better than the cylinder diameter and the number of cylinders. Many indicators of the engine are closely related to the displacement.
4
5
Share

What is the difference between 10w30 and 5w30?

The main difference between 10w30 and 5w30 lies in their low-temperature fluidity. The smaller the number before "W," the lower the low-temperature viscosity and the better the cold resistance. SAE stands for the Society of Automotive Engineers. 10W30 and 5W30 are two viscosity grades under this standard. The minimum operating temperature for 10W30 is approximately -25°C, while 5W30 can function at -30°C, meaning the latter has better low-temperature fluidity and cold resistance. The "30" refers to the viscosity at 100°C, with higher numbers indicating higher viscosity and better high-temperature resistance. Excessive viscosity can make engine cold starts difficult, reduce cleaning efficiency, and clog oil passages. Conversely, insufficient viscosity can lead to poor cylinder sealing, reduced power output, and increased oil consumption. Therefore, selecting the appropriate viscosity is crucial for engine performance. It is generally recommended to follow the manufacturer's manual for oil viscosity selection, and individuals should not adjust it arbitrarily. As the vehicle's mileage increases and component wear becomes more pronounced, switching to a higher viscosity oil may be considered.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.