How many points are deducted for crossing the line during a turn?

Differences Between Toyota Camry A25A and A25C Engines?

Camry 2.5L engine, its model is A25A or A25C. A25A or A25C have consistent performance and parameters, with no significant performance difference. The following are the differences between Toyota A25A and A25C engines: 1. Difference One: Version Distinction. A25A represents the Toyota TNGA 2.5L engine, which is imported from Japan. The A25C engine is the domestically produced version. 2. Difference Two: Assembly Distinction. A25A is the entire engine assembly imported from Japan, fully assembled in Japan before shipping. A25C imports all necessary engine parts from Japan and then assembles them in the GAC Group factory. 3. Difference Three: Performance Distinction. A25A or A25C engines feature new technology that allows free switching between the Otto cycle and Atkinson cycle systems. This internal combustion engine achieves a compression ratio of (13:1). In terms of new technology and power performance, the 2.5L engine delivers 151KW (205 horsepower) of powerful output, 240nM of torque, and robust performance. The 4-2-1 exhaust manifold arrangement takes exhaust separation to a new level.

17

3

Share

What is the Temperature of a Car's Exhaust Pipe?

Car exhaust pipe temperatures range between 30–120°C. The exhaust pipe is part of the engine's exhaust system, which mainly includes the exhaust manifold, exhaust pipe, and muffler. The three-way catalytic converter, which controls engine pollutant emissions, is also installed in the exhaust system. Exhaust pipes generally consist of a front pipe and a rear pipe. Factors affecting temperature: The outlet temperature of the rear exhaust pipe varies depending on the vehicle model, the length of the exhaust pipe, and the number of mufflers. Some modified cars can even produce flames from the tailpipe, with outlet temperatures reaching several hundred degrees. Longer exhaust pipes result in lower outlet temperatures at the tail end, while higher engine RPMs lead to higher exhaust temperatures. At idle, the outlet temperature is only around 30–50°C. Temperatures at different locations: The temperature of exhaust gases exiting the engine into the exhaust manifold is 800–900°C. After passing through the front three-way catalytic converter, the temperature drops to 600–700°C. The temperature further decreases in the mid-section of the muffler, typically to 200–300°C, while the tail-end muffler temperature is around 150°C. After cooling through the muffler baffles, the exhaust gas temperature is slightly above ambient, at 20–50°C.

10

5

Share

Is the Weichai 110 horsepower engine a 490 engine?

Weichai 110 horsepower is a 490 engine, produced by Weifang Diesel Co., Ltd., and is a domestic engine. The model of the Weichai 110 horsepower engine is WP2.3Q110E50, with a maximum torque of 280Nm and a maximum power of 81KW. For the daily maintenance of the Weichai 110 horsepower engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust system and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, and the selection standard should not be lower than the requirements specified by the manufacturer. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, the performance deteriorates, which can cause various problems for the engine. To avoid failures, the oil should be changed regularly according to usage conditions, and the oil level should be kept moderate. When the oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and the oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing the oil to bypass through the bypass valve and still carry dirt back to the lubrication parts, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and the cylinder wall, mixing with metal powder generated by part wear to form sludge. A small amount of sludge will be suspended in the oil, while a large amount will precipitate out, blocking the filter and oil holes, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the normal operation of the engine but also extends the overall lifespan of the radiator and the engine.

19

0

Share

Is the A6 front-wheel drive, rear-wheel drive, or all-wheel drive?

The A6 is front-wheel drive. Front-wheel drive refers to a drivetrain configuration where the engine is placed in the front engine compartment and power is transmitted to the front wheels. The drivetrain and driving system are among the key factors affecting a vehicle's price and performance. Common drivetrain configurations are generally categorized as front-wheel drive (FWD), rear-wheel drive (RWD), all-wheel drive (AWD), and four-wheel drive (4WD). Below is additional information: 1. Tire pressure: This is a crucial factor affecting tire lifespan. It should not be too high or too low; always inflate tires to the pressure indicated on the vehicle. Note that the required pressure for regular tires and the spare tire may differ, so follow the vehicle's specifications. Typically, tire pressure information can be found in the user manual or on the vehicle's door pillar label. 2. Regularly check tires for abnormal wear: Observe whether the tread depth is consistent on both sides of the tire. Tires have wear limit indicators; when the tread wears down to these markers, the tires must be replaced. 3. Promptly remove foreign objects from tire treads: Foreign objects can cause unusual noises while driving and may also be flung out when the wheels rotate. Inspect tires for bulges, cracks, or deteriorated valve rubber, and pay special attention to tread and edge wear, which could result from improper alignment or incorrect tire pressure.

1

5

Share

Which Brake Pads Have the Best Braking Performance?

Carbon fiber brake pads offer the best braking performance and are primarily used in racing. Next are brake pads made of ceramic-graphite composite materials, which have good thermal conductivity, high heat resistance, and low noise. When replacing brake pads, it is advisable to use the same material as the old brake pads. For urban commuting, where quick braking response is crucial—such as achieving braking with a light touch—it is recommended to choose "low-metallic" pads. If you prefer a "smooth pedal feel" with gentle and stable braking, "graphite" pads or "ceramic-graphite" composite pads are good options. For aggressive driving or frequent high-speed long-distance trips, "ceramic" pads are more suitable due to their relatively stable friction coefficient and minimal heat fade. The actual performance of brake pads ultimately depends on the manufacturer's R&D capabilities. Here are three world-renowned brake pad brands: BREMBO (Italy): Known for its progressive braking response, even slightly modified suspension systems won’t cause excessive nose-diving during braking. JURID (USA): The official brake pad supplier for luxury brands like Rolls-Royce, Maserati, and Lamborghini, with highly reliable production processes and quality control. REMSA (Spain): Features a unique 650°C high-temperature ablation production process, with high technical and manufacturing barriers, making it a hallmark of high-performance brake pads.

8

1

Share

What to Do If ETC Card Is Stolen?

If your ETC card is stolen, the cardholder should immediately call the issuing bank's customer service hotline to freeze the account to prevent further losses. Additionally, you can request UnionPay to trace any unauthorized transactions and, if necessary, report the incident to the police. Afterward, it is advisable to visit the bank to change the transaction password and disable the quick payment feature that allows contactless transactions. Furthermore, when the ETC card is not in use, do not leave it in the vehicle; keep it secure to prevent others from stealing the card information or the card itself. ETC Activation Method: Insert and remove the ETC card twice consecutively until the electronic tag screen displays "Bluetooth On." If the screen shows "Tag Invalid" when inserting and removing the card twice without the electronic tag attached, this is normal and does not affect activation. Alternatively, you can press the button on the top of the electronic tag to enable Bluetooth. Turn on your phone's Bluetooth, open the corresponding mobile app (usually with a download QR code on the electronic tag), and enter the device activation interface. Click "Device Connection" and wait patiently for the "Connection Successful" prompt. Once connected successfully, upload a photo of the vehicle's front to complete the activation. How ETC Works: ETC uses a dedicated short-range communication system between the vehicle-mounted electronic tag installed on the windshield and the microwave antenna in the toll station's ETC lane. This system leverages computer networking technology to process backend settlements with the bank, allowing vehicles to pass through highway or bridge toll stations without stopping while automatically deducting the toll fees.

8

5

Share

How many points are deducted for crossing the line during a turn?

Differences Between Toyota Camry A25A and A25C Engines?

What is the Temperature of a Car's Exhaust Pipe?

Is the Weichai 110 horsepower engine a 490 engine?

Is the A6 front-wheel drive, rear-wheel drive, or all-wheel drive?

Which Brake Pads Have the Best Braking Performance?

What to Do If ETC Card Is Stolen?

Can the driver's license and vehicle license be kept together?

Where is the car windshield washer fluid located?

What is the fuel consumption of the second-generation Fit?

What is the minimum instantaneous voltage required for a car battery during ignition?