How many points are deducted for crossing the line at a traffic light?

2 Answers
LaDonovan
07/24/25 7:17pm
Changing lanes by crossing a solid line at a traffic light results in a deduction of 3 points. At traffic signal intersections, lane changes and crossing lines can easily cause minor traffic accidents. If caught by "electronic police," a fine will be imposed along with a deduction of 3 points. Vehicles crossing the solid yellow line and driving in the opposite direction will also be fined and receive a 3-point deduction. Vehicles not driving in the designated lane, such as choosing to go straight from a left-turn lane, will be fined and receive a 2-point deduction. Violating prohibitive markings refers to actions such as crossing solid lines to change lanes, making U-turns where not allowed, or turning where prohibited, all of which are considered violations of prohibitive markings. In emergencies, immediately call the police to have traffic officers direct traffic on-site. If a vehicle breaks down and crosses the line, the hazard warning lights must be turned on, and the traffic police should be notified as soon as possible to prevent traffic congestion. If a traffic accident is caused by changing lanes over a solid line before a traffic light, the driver will be held responsible for the accident.
Was this review help?
6
0
Share
VonKylie
08/11/25 10:42am
I remember once accidentally crossing the stop line while waiting at a red light, and the camera caught me - instantly 6 points gone. As someone who's been driving for over a decade, I must remind everyone that crossing the stop line at a red light actually counts as part of running a red light, and the penalties are extremely strict. Not only do you lose 6 points from your license, but you'll also be fined 200 to 500 RMB. The key issue is that such behavior is extremely dangerous - slamming brakes while crossing the line might cause rear-end collisions, and getting hit from behind is no minor matter. That's why I always check traffic signal changes in advance and maintain sufficient following distance before driving. After making this a habit, I rarely have issues. Losing too many license points means having to retake the theoretical exam - what a hassle. Paying more attention to traffic rules is the only way to protect both yourself and others.
Was this review help?
1
0
Share
Expand All
More Forum Discussions

Should the Windshield Be Tinted?

Front windshield film serves functions such as heat insulation and blocking ultraviolet rays, providing sun protection and preventing flying debris, thereby enhancing safety. Therefore, it is advisable to apply film to the front windshield. Below are relevant details: 1. During summer, prolonged sunlight exposure makes the front windshield the primary heat source and transmission area for rising temperatures inside the car. Direct sunlight can rapidly increase the interior temperature, making the driver and passengers feel more uncomfortable. Moreover, prolonged exposure to ultraviolet rays can easily cause skin damage. Additionally, electronic devices and seats inside the car, when exposed to direct sunlight for extended periods, are prone to issues like discoloration and cracking. High-quality front windshield films on the market can block up to 99% of ultraviolet rays. 2. The front windshield is the glass closest to the driver. In the event of a severe impact, if the glass shatters, it breaks into granular pieces that can fly into the eyes of the vehicle's occupants. With film applied, the shattered pieces adhere to the film and do not scatter, thus preventing injuries to passengers and the driver. This significantly improves the safety of the driver.
13
1
Share

Which part of Sichuan does the license plate code Chuan X belong to?

License plate code Chuan X belongs to: Guang'an City and its included areas, etc., which is a prefecture-level city in Sichuan Province. The following is relevant information about license plates: 1. License plates are used for numbering and information registration of vehicles. Their main function is to identify the region to which the vehicle belongs through the license plate, and the owner of the vehicle and its registration information can also be traced based on the license plate. 2. License plate numbers can be customized, except for the first two characters which must comply with national regulations, the rest can be freely chosen. The current civilian license plate is the 92-style, which has been used nationwide since July 1994. The first character of the license plate is a Chinese character: representing the provincial-level administrative region where the vehicle is registered, which is the abbreviation of each (province, municipality directly under the Central Government, autonomous region). The second character of the license plate is an English letter: representing the prefecture-level administrative region where the vehicle is registered, which is the letter code for each (prefecture-level city, region, autonomous prefecture, league).
4
3
Share

How many points are deducted for stopping during curve driving?

Any wheel pressing against the road edge line will result in a 100-point deduction. When the front wheels of the vehicle pass over the induction loop on the ground, the electronic system captures the first photo of the vehicle. Second photo: When the rear wheels of the vehicle pass over the induction loop on the ground, the electronic system captures the second photo of the vehicle. Third photo: When the vehicle passes through the intersection and runs over the induction loop on the opposite side of the ground, the electronic system captures the third photo of the vehicle. Below is extended information on related content: Penalty: Running a red light is a violation of traffic signal regulations. Motor vehicle drivers who violate traffic signal regulations at intersections will receive corresponding penalties. Running a red light: Normally, if you can stop the vehicle after crossing the stop line, you won't be penalized for crossing the line. However, if you don't stop but continue moving forward, you will be penalized for running a red light.
1
3
Share

Can a Motorcycle Battery Be Charged Without Removal?

Motorcycle batteries can be charged without removal, but it is recommended to detach them for charging as the process generates significant gases containing sulfuric acid, which can corrode the bike frame. Below are key charging precautions: Battery Charging Precautions: Since hydrogen gas is produced during charging, which can ignite when mixed with air, strictly avoid fireworks, open flames, or static sparks near the charging area. Ensure proper ventilation by opening doors and windows. If the charger's output voltage is insufficient, a 1N4003 silicon rectifier diode can be connected to the LM7806's two pins. After 8 hours of charging, if the motorcycle battery voltage remains unchanged compared to its pre-charging state or fails to charge, inspect connection integrity. If sparks occur between battery terminals and the charger, clean dirt/oxidation layers at contact points before reconnecting. Motorcycle battery electrolyte contains sulfuric acid—take protective measures to avoid skin, eye, or clothing contact. In case of exposure, rinse immediately with copious water. Methods to Restore a Depleted Motorcycle Battery: For depleted batteries, use a dedicated charger. The battery is a critical motorcycle component; without it, normal operation is impossible. When the engine is off, the battery powers all electronic devices and initiates engine startup.
2
2
Share

What Components Make Up an Automotive Refrigeration System?

The automotive air conditioning refrigeration system consists of components such as the compressor, condenser, receiver-drier, expansion valve, evaporator, and blower. These parts are connected into a sealed system using copper pipes (or aluminum pipes) and high-pressure rubber hoses. During operation, the refrigerant circulates through this closed system in different states. Below is relevant information: The refrigerant circulates through this sealed system in varying states, with each cycle comprising four fundamental processes: 1. Compression Process: The compressor draws in low-temperature, low-pressure refrigerant gas from the evaporator outlet and compresses it into high-temperature, high-pressure gas before discharging it. 2. Heat Dissipation Process: The high-temperature, high-pressure superheated refrigerant gas enters the condenser, where, due to the drop in pressure and temperature, it condenses into a liquid and releases a significant amount of heat. 3. Throttling Process: The higher-temperature and higher-pressure refrigerant liquid passes through the expansion device, causing its volume to increase while its pressure and temperature drop sharply, exiting the expansion device as a mist (fine droplets). 4. Heat Absorption Process: The mist-like refrigerant liquid enters the evaporator, where, because the refrigerant's boiling point is much lower than the temperature inside the evaporator, it evaporates into a gas. During the evaporation process, it absorbs a substantial amount of heat from the surroundings, after which the low-temperature, low-pressure refrigerant vapor re-enters the compressor.
20
5
Share

In which year was car F produced?

If the tenth digit of the VIN is F, it indicates that the car was produced in 2016. The VIN is equivalent to a person's ID number, which is unique and cannot be altered. The VIN contains a wealth of information, including the body style, engine type, production region, and production year. Below is relevant information: 1. The production date of the car is also indicated on the nameplates located in the engine compartment and on the B-pillar, and this date is accurate to the month. If car enthusiasts want to know the production date of a particular car, they can check these nameplates. Many parts on a car have detailed production dates, but all parts should have production dates earlier than the car's assembly date; otherwise, they are replacement parts. 2. Many car parts are produced by suppliers and then delivered to the car manufacturer for assembly on the production line. If a part's production date is later than the car's assembly date, it means the part was replaced later. Production dates can be found on components such as tires, seat belts, glass, radiators, radiator frames, headlights, etc. When purchasing a used car, enthusiasts should check the production dates of major components.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.