How many points are deducted for changing lanes by crossing the solid line?

2 Answers
ValerieFitz
07/24/25 3:18am
Changing lanes by crossing the solid line results in a deduction of 3 points. The lane markings on the road are divided into solid lines and intermittent dashed lines. According to regulations, lane changes are generally allowed at dashed lines without affecting the normal driving of other vehicles, but lane changes are prohibited at solid lines. Traffic violations such as crossing the yellow line for left turns or merging at solid lines often occur during peak traffic hours or at signalized intersections without police command where branches and main roads intersect. The hazards of changing lanes by crossing the solid line include: 1. Vehicles at intersecting intersections cannot drive normally, easily causing traffic congestion; 2. Vehicles crossing the yellow line for left turns enter the intersection without slowing down, making it difficult to take emergency braking measures in case of danger, which can easily lead to traffic accidents.
Was this review help?
8
0
Share
Eva
08/10/25 10:51pm
Running over solid lines to change lanes is clearly defined as a traffic violation punishable by a 3-point deduction and a fine of around 200 yuan in traffic regulations. Having driven for over ten years, I've seen many drivers get caught by cameras when hastily changing lanes. This is especially common during rush hours when impatient drivers cross solid lines to cut into long queues, only to face fines, penalty points, and even rear-end collisions that increase repair costs. I once had the experience of being photographed crossing solid lines to change lanes on the highway, costing me several hundred yuan and worrying about insufficient license points. I recommend everyone cultivate good habits, such as signaling early before changing lanes, checking mirrors for safety, and maintaining steady speed. Following rules isn't rigid—it protects yourself and others, avoiding unnecessary troubles and expenses.
Was this review help?
16
2
Share
Expand All
More Forum Discussions

What are the reasons for ineffective car brakes?

The reasons for ineffective car brakes are: 1. There are impurities in the brake master cylinder, and the seal is not tight; 2. The vacuum booster pump fails; 3. The brake oil is too dirty; 4. The brake master cylinder or wheel cylinder leaks oil; 5. The air storage tank or pipeline interface leaks air; 6. Severe overload; 7. The brake drum is carbonized; 8. The brake master cylinder lacks brake fluid; 9. The brake master cylinder piston is worn. Braking refers to the action of stopping or reducing the speed of running locomotives, vehicles, other transportation tools, or machinery. The methods to deal with brake failure are: 1. Turn on the warning lights to alert other vehicles; 2. Shift to a lower gear; 3. Pull over and slowly pull up the handbrake.
1
1
Share

How to Tell if a Car is Pulling to One Side?

The methods to determine if a car is pulling to one side are: 1. Observe the logo on the steering wheel; 2. Note the number of steering wheel rotations when parking; 3. Move the car slightly forward and backward after parking; 4. Lean out of the window to observe the tires. The basis for judging whether a car is pulling to one side is when the car is driving straight on a flat road, it naturally veers to one side, causing the line connecting the centers of the front and rear axles to not align with the centerline of the driving trajectory. The reasons for a car pulling to one side are: 1. Excessive wear on one side of the tires; 2. Damage to the ball joint or shock absorber; 3. Uneven tire pressure on both sides of the vehicle; 4. Deformation or poor performance of related components in the vehicle's suspension system.
6
1
Share

How often should the spark plugs be replaced on a Jaguar XEL?

Jaguar XEL spark plugs should be replaced every 60,000 kilometers. Spark plugs are a crucial component of a gasoline engine's ignition system, as they introduce high-voltage electricity into the combustion chamber and create a spark by jumping the electrode gap, thereby igniting the combustible air-fuel mixture in the cylinder. Taking the 2020 Jaguar XEL as an example, its body dimensions are: length 4778mm, width 1850mm, height 1429mm, with a wheelbase of 2935mm, a fuel tank capacity of 62 liters, and a trunk capacity of 455 liters. The 2020 Jaguar XEL is equipped with a 2.0T turbocharged engine, delivering a maximum power of 147kW and a maximum torque of 320Nm, paired with an 8-speed automatic transmission.
16
3
Share

What Causes the Wuling Hongguang Thermostat to Fail to Open?

Wuling Hongguang thermostat fails to open mainly because: the Wuling Hongguang thermostat is damaged. Below is an introduction to some aspects of the thermostat: The working principle of the thermostat is that when the coolant temperature is below the specified value, the refined paraffin in the thermostat's temperature-sensitive body is in a solid state, and the thermostat valve closes the channel between the engine and the radiator under the action of the spring, causing the coolant to return to the engine via the water pump, resulting in a small circulation within the engine. Extended content: Below are the fault diagnoses for the thermostat: 1. Coolant temperature exceeds 110 degrees: Stop the car, turn off the engine, and open the engine compartment cover. Touch the upper water (coolant) pipe in the coolant radiator; it should be very hot. Then touch the lower water (coolant) pipe; it should also be very hot. If there is a significant temperature difference between the upper and lower pipes, it is confirmed as a thermostat fault; 2. If it takes a long time to reach the normal operating temperature: Stop the car and let the engine temperature drop to match the ambient temperature. Then start the engine and drive. When the dashboard temperature rises to about 70 degrees (not exceeding 80 degrees), stop the car, turn off the engine, and open the engine compartment cover. Touch the upper and lower water (coolant) pipes of the radiator. If there is no temperature difference, it is confirmed as a thermostat fault; 3. Use an infrared thermometer to test the thermostat: Aim the infrared thermometer at the thermostat housing to test the temperature changes at the thermostat's inlet and outlet. This can determine whether the thermostat is opening. When the engine starts, the inlet temperature will increase, at which point the thermostat is closed. When the coolant temperature gauge reaches 70 degrees, test the outlet temperature, which should suddenly increase. At this time, observe that the temperature on the coolant temperature gauge should be above 80 degrees, indicating the thermostat is opening and working normally. If there is no temperature change, it indicates the thermostat is malfunctioning and needs replacement.
16
3
Share

What Stickers Need to Be Displayed on a Car?

On a car, you need to display the compulsory traffic insurance sticker, annual inspection sticker, and environmental protection sticker. If the driver has held a driver's license for less than one year, they must also display a probationary driver sticker on the rear of the car. If a motor vehicle driven on the road does not display the compulsory traffic insurance sticker, traffic management authorities may impound the vehicle in accordance with regulations and notify the party to provide the compulsory traffic insurance sticker or complete the necessary procedures. The annual inspection sticker refers to the sticker that the owner should affix to the front windshield after passing the annual inspection as proof. If lost, the owner must bring all required documents to the vehicle management office, motor vehicle registration service station, or traffic police station to apply for a replacement. The environmental protection sticker is a classification sticker issued by the state for motor vehicle emission standards, divided into yellow and green categories. It is issued after reviewing the vehicle type and emission standards, with the purpose of facilitating energy-saving and emission-reduction inspections and regular environmental protection checks for vehicles.
4
3
Share

How to Quickly Dry Water Inside the Car?

To quickly dry water inside the car, you can wipe, ventilate, or extract the water, but drivers should not attempt to handle it themselves as accumulated water can cause short circuits in the vehicle's electrical system. It is recommended to visit the nearest repair shop for professional assistance. Below are the detailed steps for cleaning up water inside the car: First, completely remove the water inside the car: If the water accumulation is caused solely by rain, simply open the car windows on a sunny day to allow thorough airing. If water has entered the cabin, the repair process mainly involves removing the accumulated water. There are several rubber seals located at the bottom of the vehicle chassis; opening these seals can drain the water from the cabin. However, since the floor mats inside the car are highly absorbent, they should be removed and placed in a spacious area to facilitate evaporation. If there is still moisture inside the car, turn on the air conditioning and adjust the air circulation switch to the internal circulation mode. This allows the moisture inside the cabin to be expelled through the air conditioning system, which is a very efficient dehumidification method in summer. Clean and dry the items inside the car: Rain can easily bring dirt and mud into the car. On a sunny day, remove detachable interior items such as floor mats and seat covers for airing and cleaning. For less dirty carpets, use a vacuum cleaner directly. For heavily soiled carpets, specialized detergents are required. Start by removing dust, then spray an appropriate amount of detergent and scrub. Note that carpets should not be fully immersed in water for scrubbing, as this can damage the adhesive layers between different materials inside the carpet and prolong drying time, affecting usage and causing dampness inside the car. Disinfect and thoroughly clean: Wash seats and seat covers with bleach, and replace absorbent cotton to prevent bacterial growth. Ozone disinfection can also be performed. The air conditioning evaporator should be disassembled, rinsed, disinfected, and dried. The blower should also be cleaned carefully. Perform air purification inside the car using "photocatalyst" technology to purify the air.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.